SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation http://developer.cisco.com/c/message_boards/find_category?p_l_id=2760558&mbCategoryId=0 2013-05-22T11:20:22Z 2013-05-22T11:20:22Z Toms Jacob http://developer.cisco.com/c/message_boards/find_message?p_l_id=2760558&messageId=4446873 2011-09-05T10:45:20Z 2011-09-05T10:45:20Z

In my configuration in the router, (MGF Layer2) I created two Vlan Vlan 30 and Vlan 40. Vlan 30 is for voice and Vlan 40 is for Data. For the service module I need to give Ip address from Vlan 30 and Vertual machine (Windows Server) and Branch PC I need to assign the Ip Address from VLAN 40. Rest of the VLAN 30 Ip address I will use for CME IP phones in the Same router. Is this configuration possible? Because in the documnetation I am seeing only one VLAN created for VM. Regards Toms

Toms Jacob 2011-09-05T10:45:20Z Toms Jacob http://developer.cisco.com/c/message_boards/find_message?p_l_id=2760558&messageId=4448411 2011-09-05T08:57:10Z 2011-09-05T08:57:10Z

Then what is the use of EHWIC ? usnig the MGF Layer2 configuration [quote]The I interface is SM X/1. Thanks Anurag Gurtu On Sep 3, 2011, at 7:16 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote: > Toms Jacob has created a new message in the forum "Technical Questions": > > -------------------------------------------------------------- > Hi, > Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct? > Is this will use for Router Traffic also? > > Hi Toms, > > > > Please refer to the install guide . It has a configuration with multiple vlans. > > > > http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html > > > > Regards, > > Ashwin. > > > > From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] > Sent: Saturday, August 20, 2011 5:39 AM > To: cdicuser@developer.cisco.com > Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation > > > > Toms Jacob has created a new message in the forum "Technical Questions": > > -------------------------------------------------------------- > Dear Sir, > I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc. > I did the configuration for CME. > I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following > 1. ISRG2 Router > 2. SM-SRE-700-K9 > 3. EHWIC - 4 Port > > I have two Vlan > Data : 10.31.180.0 /25 > Voice: 10.31.180.128 /25 > > I don't want to configur other than the above vlans. I have to use the MGF functionality. > > Please send me a sample configuration > > Regards > Toms > Banque Saudi Fransi > Voice communication section manager > -- > To respond to this post, please click the following link: > > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371> > > or simply reply to this email. > > -- > To respond to this post, please click the following link: > > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4445404> > > or simply reply to this email.[/quote]

Toms Jacob 2011-09-05T08:57:10Z Toms Jacob http://developer.cisco.com/c/message_boards/find_message?p_l_id=2760558&messageId=4443771 2011-09-03T15:55:12Z 2011-09-03T15:55:12Z

[quote]Hi, Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct? Is this will use for Router Traffic also?   Also in one document I saw <font face="Courier" size="1"><font face="Courier" size="1"> service-module mgf ip address 10. </font></font><font face="Courier" size="1">   </font> [b]P[/b].30.2 255.255.255.0<font face="Courier" size="1"><font face="Courier" size="1">   </font></font><font face="Courier" size="1">   </font> Is this command is really required ? In the installation and configuration guide I cannot find this.   Hi Toms, Please refer to the install guide . It has a configuration with multiple vlans. http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html Regards, Ashwin. From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Saturday, August 20, 2011 5:39 AM To: cdicuser@developer.cisco.com Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation Toms Jacob has created a new message in the forum "Technical Questions": -------------------------------------------------------------- Dear Sir, I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc. I did the configuration for CME. I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following 1. ISRG2 Router 2. SM-SRE-700-K9 3. EHWIC - 4 Port I have two Vlan Data : 10.31.180.0 /25 Voice: 10.31.180.128 /25 I don't want to configur other than the above vlans. I have to use the MGF functionality. Please send me a sample configuration Regards Toms Banque Saudi Fransi Voice communication section manager -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371> or simply reply to this email. [/quote]

Toms Jacob 2011-09-03T15:55:12Z Toms Jacob http://developer.cisco.com/c/message_boards/find_message?p_l_id=2760558&messageId=4445404 2011-09-03T15:16:08Z 2011-09-03T15:16:08Z

Hi, Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct? Is this will use for Router Traffic also?   [quote]Hi Toms, Please refer to the install guide . It has a configuration with multiple vlans. http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html Regards, Ashwin. From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Saturday, August 20, 2011 5:39 AM To: cdicuser@developer.cisco.com Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation Toms Jacob has created a new message in the forum "Technical Questions": -------------------------------------------------------------- Dear Sir, I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc. I did the configuration for CME. I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following 1. ISRG2 Router 2. SM-SRE-700-K9 3. EHWIC - 4 Port I have two Vlan Data : 10.31.180.0 /25 Voice: 10.31.180.128 /25 I don't want to configur other than the above vlans. I have to use the MGF functionality. Please send me a sample configuration Regards Toms Banque Saudi Fransi Voice communication section manager -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371> or simply reply to this email.[/quote]

Toms Jacob 2011-09-03T15:16:08Z Toms Jacob http://developer.cisco.com/c/message_boards/find_message?p_l_id=2760558&messageId=4396371 2011-08-20T13:38:31Z 2011-08-20T13:38:31Z

Dear Sir, I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc. I did the configuration for CME. I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following 1. ISRG2 Router 2. SM-SRE-700-K9 3. EHWIC - 4 Port   I have two Vlan Data : 10.31.180.0 /25 Voice: 10.31.180.128 /25   I don't want to configur other than the above vlans. I have to use the MGF functionality.   Please send me a sample configuration   Regards Toms Banque Saudi Fransi Voice communication section manager

Toms Jacob 2011-08-20T13:38:31Z