Hi
We had a service module with AXP version 1.5.3 and there packages installed on the service module where resource limits are been distributed among the pacakges installed.
Now we are trying to updgrade the AXP version and all the related packages.
When we are trying to upgrade the AXP HOST OS using the
following command
software install upgrade url <ftpaddress>/<packagename.pkg>
we got the following error message
memory limit exceeded
Then we thought to follow these stpes to upgrade
1) First uninstall the AXP packages (which frees up the resource limits)
2) upgrade the HOST OS
while uninstall the packages we are getting the following error and system keeps on rebooting , can help me regarding this. Plase find the error message we are getting .
Initializing memory. Please wait...
4,290,379,776 bytes of system memory tested OK
Channel 0 Master : Hitachi HTE545050B9A300
Channel 1 Master : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
.......................................................................................................
SRE module get located and run....
Now booting from secondary boot loader....
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... done.
Loading disk:/cmdlineextra ... done.
Verifying ... done.
Starting Kernel.
Platform: sm
Verifying application level programs
sd 4:0:0:0: Assuming drive cache: write through
sd 4:0:0:0: Assuming drive cache: write through
Errors for oscore_manifest:
Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py
Checksum mismatch on : /lib/python2.3/installer/InstMain.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py
Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py
Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py
Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh
Application level programs verification FAILED!
rebooting ...
Restarting system.
Initializing memory. Please wait...
Initializing memory. Please wait...
4,290,379,776 bytes of system memory tested OK
Channel 0 Master : Hitachi HTE545050B9A300
Channel 1 Master : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
.......................................................................................................
SRE module get located and run....
Now booting from secondary boot loader....
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... done.
Loading disk:/cmdlineextra ... done.
Verifying ... done.
Starting Kernel.
Platform: sm
Verifying application level programs
sd 4:0:0:0: Assuming drive cache: write through
sd 4:0:0:0: Assuming drive cache: write through
Errors for oscore_manifest:
Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py
Checksum mismatch on : /lib/python2.3/installer/InstMain.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py
Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py
Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py
Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh
Application level programs verification FAILED!
rebooting ...
Restarting system.
Initializing memory. Please wait...
Initializing memory. Please wait...
4,290,379,776 bytes of system memory tested OK
Channel 0 Master : Hitachi HTE545050B9A300
Channel 1 Master : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
.......................................................................................................
SRE module get located and run....
Now booting from secondary boot loader....
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... done.
Loading disk:/cmdlineextra ... done.
Verifying ... done.
Starting Kernel.
Platform: sm
Verifying application level programs
sd 4:0:0:0: Assuming drive cache: write through
sd 4:0:0:0: Assuming drive cache: write through
Errors for oscore_manifest:
Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py
Checksum mismatch on : /lib/python2.3/installer/InstMain.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py
Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py
Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py
Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py
Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh
Application level programs verification FAILED!
rebooting ...
Restarting system.
Initializing memory. Please wait...
Initializing memory. Please wait...
4,290,379,776 bytes of system memory tested OK
Channel 0 Master : Hitachi HTE545050B9A300
Channel 1 Master : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
BIOS SM 2.4, BIOS Build date: 11/04/2009
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
.......................................................................................................
SRE module get located and run....
Now booting from secondary boot loader....
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Regards
Rakesh
