« Back to Technical Questions

Can 2 blades monitor same traffic with RITE

Combination View Flat View Tree View
Threads [ Previous | Next ]
Post New Thread
toggle
Can 2 blades monitor same traffic with RITE
Answer
6/27/11 4:22 PM
Hi,
 
I've tried to configure RITE on router 3925 to forward traffic from interface GIG 0/1 to 2 AXP blades. I wondered if this is possible since RITE CLI commands don't allow me to do this:
 
axp-dev-3826(config)#ip traffic-export pro
axp-dev-3826(config)#ip traffic-export profile profile-2ports
axp-dev-3826(conf-rite)#interface sm 1/0
axp-dev-3826(conf-rite)#interface sm 2/0
axp-dev-3826(conf-rite)#end
 
...
and sho  running shows only one interface is being used for export
!
ip traffic-export profile profile-2ports
  interface SM2/0
  bidirectional
  mac-address 0080.8c00.0001
ip cef
....
Thanks!
Flag

RE: Can 2 blades monitor same traffic with RITE
Answer
6/30/11 1:49 PM as a reply to Vijay Raman.
Hi Vijay,

you can configure one interface to one profile, may be you can create second profile for another interface.

Thanks,
Raghavendra
Flag