Developer Network

« Back to Technical Questions

Reloading Service Module

Combination View

Post New Thread

Rakesh Kannegundla Posts: 11 Join Date: 9/23/10 Recent Posts	Reloading Service Module Answer 7/25/11 6:42 PM Mark as an Answer Submit Reply with Quote Quick Reply Hi We had a service module with AXP version 1.5.3 and there packages installed on the service module where resource limits are been distributed among the pacakges installed. Now we are trying to updgrade the AXP version and all the related packages. When we are trying to upgrade the AXP HOST OS using the following command software install upgrade url <ftpaddress>/<packagename.pkg> we got the following error message memory limit exceeded Then we thought to follow these stpes to upgrade 1) First uninstall the AXP packages (which frees up the resource limits) 2) upgrade the HOST OS while uninstall the packages we are getting the following error and system keeps on rebooting , can help me regarding this. Plase find the error message we are getting . Initializing memory. Please wait... 4,290,379,776 bytes of system memory tested OK Channel 0 Master : Hitachi HTE545050B9A300 Channel 1 Master : Hitachi HTE545050B9A300 DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Please enter '*' to change boot configuration: Detect and Initialze network device Backup current platform configurations.... SRE step 1 - SM registration... Response - no installation needed (len: 422) SRE Installation Not Needed Restoring orignial configuration... Updating flash with bootloader configuration. Please wait .................. done. Loading disk:/bzImage ... done. Loading disk:/cmdlineextra ... done. Verifying ... done. Starting Kernel. Platform: sm Verifying application level programs sd 4:0:0:0: Assuming drive cache: write through sd 4:0:0:0: Assuming drive cache: write through Errors for oscore_manifest: Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py Checksum mismatch on : /lib/python2.3/installer/InstMain.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh Application level programs verification FAILED! rebooting ... Restarting system. Initializing memory. Please wait... Initializing memory. Please wait... 4,290,379,776 bytes of system memory tested OK Channel 0 Master : Hitachi HTE545050B9A300 Channel 1 Master : Hitachi HTE545050B9A300 DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Please enter '' to change boot configuration: Detect and Initialze network device Backup current platform configurations.... SRE step 1 - SM registration... Response - no installation needed (len: 422) SRE Installation Not Needed Restoring orignial configuration... Updating flash with bootloader configuration. Please wait .................. done. Loading disk:/bzImage ... done. Loading disk:/cmdlineextra ... done. Verifying ... done. Starting Kernel. Platform: sm Verifying application level programs sd 4:0:0:0: Assuming drive cache: write through sd 4:0:0:0: Assuming drive cache: write through Errors for oscore_manifest: Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py Checksum mismatch on : /lib/python2.3/installer/InstMain.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh Application level programs verification FAILED! rebooting ... Restarting system. Initializing memory. Please wait... Initializing memory. Please wait... 4,290,379,776 bytes of system memory tested OK Channel 0 Master : Hitachi HTE545050B9A300 Channel 1 Master : Hitachi HTE545050B9A300 DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Please enter '' to change boot configuration: Detect and Initialze network device Backup current platform configurations.... SRE step 1 - SM registration... Response - no installation needed (len: 422) SRE Installation Not Needed Restoring orignial configuration... Updating flash with bootloader configuration. Please wait .................. done. Loading disk:/bzImage ... done. Loading disk:/cmdlineextra ... done. Verifying ... done. Starting Kernel. Platform: sm Verifying application level programs sd 4:0:0:0: Assuming drive cache: write through sd 4:0:0:0: Assuming drive cache: write through Errors for oscore_manifest: Checksum mismatch on : /lib/python2.3/installer/DwnldrDef.py Checksum mismatch on : /lib/python2.3/installer/InstMain.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyWOG.py Checksum mismatch on : /lib/python2.3/installer/ResourceTPWOGExtension.py Checksum mismatch on : /lib/python2.3/installer/ThirdPartyManifestData.py Checksum mismatch on : /lib/python2.3/installer/AppHostRsrcMgr.py Checksum mismatch on : /bin/products/apphosting/iosapid_shutdown.sh Application level programs verification FAILED! rebooting ... Restarting system. Initializing memory. Please wait... Initializing memory. Please wait... 4,290,379,776 bytes of system memory tested OK Channel 0 Master : Hitachi HTE545050B9A300 Channel 1 Master : Hitachi HTE545050B9A300 DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 2.4, BIOS Build date: 11/04/2009 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Please enter '*' to change boot configuration: Regards Rakesh
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Anusha Kannappan Posts: 57 Join Date: 9/15/09 Recent Posts	RE: Reloading Service Module Answer 7/20/11 10:05 AM as a reply to Rakesh Kannegundla. Mark as an Answer Submit Reply with Quote Quick Reply Hi Rakesh, Please make use of the following document "How to Install AXP via the Helper File" under the following location to install the AXP. http://developer.cisco.com/web/axp/wikidocs?p_p_id=1_WAR_wikinavigationportlet_INSTANCE_hv6C&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&p_p_col_id=column-1&p_p_col_count=1&p_r_p_185834411_nodeId=803283&p_r_p_185834411_title=How+to+Install+AXP+via+the+Helper+File Thanks, Anusha
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top