« Back to Technical Questions

RE: AXP with SRE

Combination View Flat View Tree View
Threads [ Previous | Next ]
Post New Thread
toggle
AXP with SRE
Answer
12/7/12 5:46 PM
hi,
AXP had been en of sale because we want to use SM-SRE-710-K9 module for Cisco AXP function. We suppose that this is possible. I install sre with this command service-module sm 1/0 install url ftp://user:pass@ip/axp-k9.sme.1.6.2.pkg. so far there is any problem. But we develop an application with linux-ubuntu. When I want to install, I get a error like

Trying Third Party verification
Validating new manifest file /dwnld/pkgdata/VoiceLogger.21.0.pkg from package /dwnld/pkgdata/***.pkg
Validation Failed: Package "***.pkg" is not allowed to run on platform "SM-SRE-710-K9"
ERROR get_pkg_listemoticonackage signature validation failed for ***.pkg
Package signature validation failed for ***.pkg

What is the meaning of this error?
Please answer me, as soon as possible
Thanks for your support.
Flag

RE: AXP with SRE
Answer
12/7/12 6:35 PM as a reply to Safiye turgut.
Hi Safiye,
The issue you are seeing is most likely caused by the developer certificate you packaged with your application.  Most likely it doesn't allow the package to be installed on the SM-SRE-710-K9 hardware because that SKU is not specified in the certifcate.  Since you're already using an SM-SRE-710-k9 service module, we strongly recommend that you move to our next generation product, SRE-V which is the Service Ready Engine Virtualization.  This platform includes VMware ESXi so that you can install your own OS into a virtual machine.  As a result you won't have any issues with porting your application as you might experience with AXP.  In addition there are no developer certificates as with AXP that would lead to issue that you are currently experiencing.  Finally as you know AXP is EOS/EOL and we are not accepting new partners onto the product as specified in the AXP technical center at: http://developer.cisco.com/web/axp.  You can download the SRE-V platform and documentation from http://developer.cisco.com/web/srev .

Thanks,
Brett
Flag

RE: AXP with SRE
Answer
12/10/12 12:31 PM as a reply to Safiye turgut.
 
Hi 
 
Thanks for your  reply
 
In the datasheets we saw that SM-SRE-710-K9 supports Cisco AXP, so we bought it.  The pkg is created by us.  For  this, I think there is a any license. Maybe I ask basic questions, but  I want to understand fully.
 
 
Flag

RE: AXP with SRE
Answer
12/10/12 7:30 PM as a reply to Safiye turgut.
Hi Safiye,
If you purchased an AXP license with the service module, please let us know your sales order number and we can look into potentially migrating that license to SRE-V.  As I mentioned earlier the SRE-V product is the next generation virtualization platform after AXP.  To try out SRE-V now, you can download the platform from http://developer.cisco.com/web/srev/documentation , and install it onto the service module via the router CLI .  You can download the vSphere client by entering the service-module IP into a browser and downloading it from web page.  Then simply  start up the client and log into it with that same IP.  The default user ID for logging in is 'root' and the password is blank.  I've provided a sample configuration for SRE-V below.  If you have technical questions regarding SRE-V, please post them in the 'SRE-V Technical Questions' forum at http://developer.cisco.com/web/srev/community .

Sample Router Configuration
interface SM1/0
ip address 192.168.1.100 255.255.255.0
service-module ip address 192.168.1.1 255.255.255.0
service-module ip default-gateway 192.168.1.100

interface SM1/1
switchport mode trunk
 
Thanks,
Brett
Flag