« Back to Technical Questions

Re: New Message from JASON OLSEN in Application eXtension Platform (AXP) -

Combination View Flat View Tree View
Threads [ Previous | Next ]
Post New Thread
AXP Hard Drive failure option
Answer
9/27/10 10:55 PM
All,
Without running the SRE-900 on the newer ISR platform with RAID, what options are there to provide additional redundancy upon a HD crash within the AXP?  We are looking at the APPRE-502-K9 as an option for over 100 remote locations but one concern that continues to come up is that upon a HD failure there is no recovery method. 
 
Thanks,
Jason
Flag

Re: New Message from JASON OLSEN in Application eXtension Platform (AXP) -
Answer
9/27/10 11:13 PM as a reply to JASON OLSEN.
If you have an external share like a NAS or an internal module like ISS then you can host application files on it in parallel to hosting them on the hard drive. However the logic to replicate the disk would have to be taken care by the application.

Thanks

Anurag
Flag

RE: Re: New Message from JASON OLSEN in Application eXtension Platform (AXP
Answer
9/27/10 11:29 PM as a reply to Anurag Gurtu.
Anurag,
 
Is the NAS share only supported on Version 1.5.3?  Also since the ISS is another NME module, it would not work if we are already using the NME for the APPRE correct?
 
Thanks,
Jason
 
Flag

Re: New Message from JASON OLSEN in Application eXtension Platform (AXP) -
Answer
9/27/10 11:37 PM as a reply to JASON OLSEN.
Yes, NAS feature was added in AXP version 1.5.3

Thanks

Anurag Gurtu

On Sep 27, 2010, at 11:29 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote:

> JASON OLSEN has created a new message in the forum "Technical Questions":
> --------------------------------------------------------------
> Anurag,
>
> Is the NAS share only supported on Version 1.5.3? Also since the ISS is another NME module, it would not work if we are already using the NME for the APPRE correct?
>
> Thanks,
> Jason
>
> --
> To respond to this post, please click the following link:
> <http://developer.cisco.com/web/axp/forums/-/message_boards/message/2580653>
> or simply reply to this email.
Flag