Hi 
 
 
Raid statistics of the service modules of some our partners are given below.
 
msf-mod1# show disk stats
System stats:
Raid Level        :     linear
Array Size        :     974791936 blocks
Raid Devices      :     2
Active Devices    :     2


msf-mod1#show resource limits
 
APPLICATION      CPU(INDEX)      MEMORY(M   DISK(M
            msf           49000            3116     421300
 
   SYSTEM TOTAL
      ALLOCATED           49310            3224     516491
 
      RESOURCES
      AVAILABLE            5690             792     435426


 
so inorder to change the raid status to linear to level1(raid1) can you please provide the steps/suggestions to upgrade the raid level on the service module.
 
since it is preconfigured as linear we cannot have hardware redundancy at the storage level, if in future if there is any disk(crash/failure) we can recover the data which is on the disk.  
 
can you please provide some suggestion on raid status if we continue the status as linear.
 
Regards
Rakesh
 
 

Hi Brett

Thank you very much for the reply.

I had gone through the AXP user guide .

If we use the command provided above which is in the user guide also.

can you explain us what this command will impact to the existing installed AXP packages/configurations on the service module.


do this command reinstall the AXP HOST OS on the service module with raid level as 1, and deletes the existing AXP HOST OS and install a new AXP HOST OS. or only updates the raid level from linear to raid1

service-module sm 1/0 install url ftp://192.168.1.2/pub/axp-k9.sme.1.6.2.pkg argument ¿disk-cfg-mode=1¿.

can you please provide us some suggestion on this scenario.

We had AXP packages deployed on the service modules.


Regards
Rakesh