Developers

RE: CUCM API's to Replace CUAE Trigger on JTapiCallEstablished in CUAE

2013-03-07T06:57:00Z

[quote=Tracy Laughton]Hello, We have a CUAE application that we need to replace since the CUAE is end of life. We have been told by Cisco that we can use Call Manager API's to replace the functionality in our application, but we are not sure how to proceed. Our CUAE trigger application does the following: - Triggers on Metreos.Providers.JTapi.JTapiCallEstablished - Triggers when "to" number (defined in Trigger Parameters) is a specific 5 digit number When jTapiCallEstablished is called, the following information is extracted from JTapiCallEstablishedOptions and passed to another application: To JTapiCallId DeviceName (for mac number) From Does anyone have any suggestions for how to replace this using Call Manager API's, or which API's to look at? Thanks, Tracy.[/quote] Nabhonil is correct, I did this last month where I had started with the CUAE and migrated quickly over to the JTAPI interface after learning it was going away. There is an example application that allows you to monitor - be an observer of a call, there are two steps you must follow, one is configuring the call manager to allow your "application" to have access as an observer, the second is making sure that the JTAPI service is running. I would assume that it is already running. You will need to configure this application as a daemon process, if you need further guidance on how to do this I am happy to provide additional guidance, you are looking for makecall.java which you can piece together to get working properly. I believe this is in the sample apps under the JTAPI directory. Even though it allows you to make calls, it also allows you to listen to other calls. Cheers, Peter Michael Gits pgits@geekgaps.com

RE: CUCM API's to Replace CUAE Trigger on JTapiCallEstablished in CUAE

2013-03-07T04:17:41Z

Hi Tracy, You can write a simple JTAPI based Java application to achieve the similar thing. I would suggest to look into the following developer forum for JTAPI. [url=http://developer.cisco.com/web/jtapi/home]http://developer.cisco.com/web/jtapi/home[/url] Thanks Nabhonil [quote=Tracy Laughton]Hello, We have a CUAE application that we need to replace since the CUAE is end of life. We have been told by Cisco that we can use Call Manager API's to replace the functionality in our application, but we are not sure how to proceed. Our CUAE trigger application does the following: - Triggers on Metreos.Providers.JTapi.JTapiCallEstablished - Triggers when "to" number (defined in Trigger Parameters) is a specific 5 digit number When jTapiCallEstablished is called, the following information is extracted from JTapiCallEstablishedOptions and passed to another application: To JTapiCallId DeviceName (for mac number) From Does anyone have any suggestions for how to replace this using Call Manager API's, or which API's to look at? Thanks, Tracy.[/quote]

CUCM API's to Replace CUAE Trigger on JTapiCallEstablished in CUAE

2013-03-06T16:14:31Z

Hello, We have a CUAE application that we need to replace since the CUAE is end of life. We have been told by Cisco that we can use Call Manager API's to replace the functionality in our application, but we are not sure how to proceed. Our CUAE trigger application does the following: - Triggers on Metreos.Providers.JTapi.JTapiCallEstablished - Triggers when "to" number (defined in Trigger Parameters) is a specific 5 digit number When jTapiCallEstablished is called, the following information is extracted from JTapiCallEstablishedOptions and passed to another application: To JTapiCallId DeviceName (for mac number) From Does anyone have any suggestions for how to replace this using Call Manager API's, or which API's to look at? Thanks, Tracy.

Help required to analyze CUAE scripts

2012-12-12T13:21:19Z

Hi , We have a application which was developed using CUAE scripts. Can anybody help me to walkthrough the scripts briefly? Thanks, Suresh

Automatic reply: New Message from rana nazzal in Cisco Unified Application

2012-11-24T11:36:48Z

**Vacation Alert** I am out of the office for the Thanksgiving Holiday with limited email access. I will reply as soon as possible. If you have design questions, please contact the Plan/Design/Implement help desk at: http://www.cisco.com/web/partners/tools/pdihd.html For technical issues, please contact the Technical Assistance Center at (800) 553-2447 For sales support, please contact your Cisco Account Manager or reach out to one of the following contacts: Email: cs-support-us@cisco.com Partner Help Line: www.cisco.com/go/ph or call 1-800-553-6387 Regards, --Todd Carswell

build a simple application for ip phone

2012-11-24T11:36:00Z

Hello All, i want to build a new application for Wireless IP phone. this application has one softkey to return a string from a web service. please tell me what is the exact tools i need to do that ???

send text message to ip phone using the extension number

2012-11-21T10:32:14Z

hallo all, can i send a text message to cisco wireless ip phone using the extension number of the ip phone instead of IP address ??? thanx

RE: save text message on the server from IP phone once it is received

2012-11-21T09:47:47Z

I'm not sure how to help you here. You'll need to use JDBC or similar to talk to a database. B.

RE: save text message on the server from IP phone once it is received

2012-11-21T08:17:20Z

how can i save the messages in a server database from my application??

RE: save text message on the server from IP phone once it is received

2012-11-21T07:59:06Z

You'll need to store the messages in a database on your application server and then push out "Previous" and "Next" buttons to the handsets with each message so that the user can navigate back and forth. B.

Automatic reply: New Message from rana nazzal in Cisco Unified Application

2012-11-21T07:20:48Z

Hi there, I'm out of the office until Thu 22nd Nov with limited access to email or vmail. So please expect a delayed response In case of urgency please SMS me on +447730711380 or contact Adel Malak amalak@cisco.com +971555011557

save text message on the server from IP phone once it is received

2012-11-21T07:20:10Z

[color=#525252]Hello All,[/color] I develop an application that send a text message to Cisco IP Phones. this application send the message successfully as i need but when this message received on the phone, only a cancel softkey shown on the screen and if it is pressed by mistake, the message will be lost !! i want to save the messages on the server directly when it is received . and then if i add softkey like 'read previous' and press it , the previous received messages loaded from the server and shown on the screen can somebody help me to do that, or advise me what can i do?? thanx alot

Automatic reply: New Message from Mustapha Arakji in Cisco Unified Applicat

2012-11-19T16:35:48Z

I will be out of the office until Thursday the 22th of Novemeber with limited access to email. If your issue is urgent, please contact the our team at as_ccdt@cisco.com However, I will reply to your email as soon as possible. Regards Ian Sherrin

RE: Send Text message to IP Phone

2012-11-19T16:34:47Z

Hi, The development team were able to develop a program that sends a text message to the IP Phone, but the question now, is it possible to make the phone ring when the message is received? Regards,

RE: How to authenticate against /ccmcip/authenticate.jsp programatically

2012-08-22T21:34:33Z

Another API is AXL SQL Toolkit which comes installed on communications manager 8 and can be downloaded from https://:8443/plugins/axlsqltoolkit.zip After unzipping go to the schema folder to generate the proxy classes. In .NET environment, you can do this by going to the "current" folder under schema and run this at command prompt [code]wsdl AXLAPI.wsdl AXLSoap.xsd[/code] I'm still trying to figure out how to get call logs. I am trying to use different approach than to parse CDR file obtained from CDROnDemandService. Doesn't seem like AXL suplies that info per device. Is this true? Do I need to use JTAPI to get call logs per device?

RE: How to authenticate against /ccmcip/authenticate.jsp programatically

2012-08-20T17:03:46Z

Extension Mobility API login is what I found so far that closely matches what I'm trying to do. [url=http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/7_0_1/ccmdvCh3.pdf]http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/7_0_1/ccmdvCh3.pdf[/url]

How to authenticate against /ccmcip/authenticate.jsp programatically

2012-08-20T03:54:29Z

[b]We have Cisco Unified Call Manager 8 environment in which I want to write a reporting app.[/b] [b]I want to try out the following approach - [/b] [b]Every device contacts an authentication server, and gets a list of its own placed/received/missed calls.[/b] [b]I want to authenticate against this server as a device, programatically, and get the same list of calls for every device. These are the two XML services that I have come across by reading the documentation.[/b] [b][url=https://10.7.0.5:8443/ccmcip/authenticate.jsp]https://10.7.0.5:8443/ccmcip/authenticate.jsp[/url][/b] [b][url=https://10.7.0.5:8443/ccmcip/xmldirectory.jsp]https://10.7.0.5:8443/ccmcip/xmldirectory.jsp[/url][/b] My question is, how do I authenticate against the authenticate.jsp service using .NET? I'm not asking for code per say (if you have thats great), but some overview/process of how to do this. Maybe a documentation page?

How to authenticate against /ccmcip/authenticate.jsp programatically

2012-08-20T03:54:29Z

CUCM 8 CDROnDemand SOAP credentials

2012-08-16T18:53:55Z

Hello! I am writing a web application that will contact our Unified Call Manager's web services and do reporting stuff - like received calls, missed calls, placed calls etc., by extension. I understand there are 3rd party software that do this already, but there is a requirement to start doing this inhouse. I am not a network analyst/sysadmin by any means and am trying to figure my way out of this huge product for its programming options. What I have found so far in our environment is this : - every user IP phone contacts a out-of-the-box Cisco web service in our datacenter to display missed/received calls - the web service is SOAP based - the web service returns XML - the web service asks for authentication before returning the WSDL There is one help page that I have found that is closely related to what I am doing: [url=http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/8_0_1/serviceability.html#wp1053732]http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/8_0_1/serviceability.html#wp1053732[/url] I want to download the WSDL for the CDRonDemand web service, but am stuck at the authentication part. The service will return WSDL only if I provide credentials. Which credentials do I need to use here? The installation was done by consultants, but I can get a list of usernames/passwords. But would like to know which particular one applies here. Thanks!

XML API -Create Training session.(multiple attendees option-Email not send)

2012-08-01T08:01:27Z

Hii, I am creating training session using xml api.Successfully creating a training session but [color=#ff0000][b]cannot send email for multiple attendees[/b][/color] option Code as follows:

hostid hostpassword 0000 9999 johnsmith@xyz.com

PUBLIC 111111 4/05/2004 10:00:00 GMT-12:00, Dateline (Eniwetok) 60 46 20 jimz hol test agenda 1 description greeting location invitation false false true false false false false false false false false false false false false false false false false false false false false false false false false false true NONE 4 String String false 1 trackingCode1 trackingCode2 trackingCode3 trackingCode4 trackingCode5 trackingCode6 trackingCode7 trackingCode8 trackingCode9 trackingCode10 RECURRING_SINGLE SUNDAY 5 WEEKLY 5 1 1 1 1 true String false String false 1 1 1 alternatehost1 host1@test.com MEMBER HOST [color=#ff0000][b] alternatehost3 host3@test.com MEMBER HOST [/b] [b] alternatehost4 host4@test.com MEMBER HOST [/b][/color] true true true pass 10 04/10/2004 00:00:00 true Red marked portion is for adding multiple attendees in the training session.Any one see the error please reply me.?