Digital Media Suite API Forums

« Back to Digital Signs API Forum

Determining the DMP model programmatically

Combination View Flat View Tree View
Threads [ Previous | Next ]
Determining the DMP model programmatically
Answer
1/19/11 1:48 AM
Hi,
 
Is there any way to determine the DMP model along with the capabilities supported by that particular model from the DMM or the MIB APIs?  This is because it seems different DMP models don't support the same display format (i.e. 4400 can support HTML, 4310 will only support Flash), and we would like to determine which asset type to push to the DMP group given the DMP model(s) supported within a particular DMP group.
 
Thanks!
 
-Elaine
 
Flag

RE: Determining the DMP model programmatically
Answer
1/19/11 9:57 PM as a reply to Elaine David.
If you are running a 5.2.2 DMM, you should see this information in the DMP manager. If not you can use the following MIB to obtain the DMP product and version:


https://<USERNAME>:<PASSWORD>@<DMP_IP_ADDRESS>/get_param?p=init.product&p=init.version
Flag