CiscoIPPhoneExecute and UCM 8.6.1

when send HTTP request with CiscoIPPhoneExecute

2012-12-12T15:26:31Z

Hi, just 2 Questions please.. [b]when send HTTP request with CiscoIPPhoneExecute[/b] 1- using "[b]CallManagerSimulator[/b].exe" and "[b]IP Phone 7960G[/b]" , Authentication required?? -yes i can access "http://X.X.X.X/CGI/Execute" (but Username/ Password required) Error Log 4.????? -yes registered and can access the url services. 2- using "[b]CallManager6[/b] [b]VMware[/b]" and "[b]IP[/b] [b]Communicator[/b]", [color=#ff0000]the ip communicator take the same ip address of the pc[/color] -No i can't access "http://X.X.X.X/CGI/Execute" (not found) (404).???? -yes registered and can access the url services. - pc (192.168.1.2) IP Cummunicator(192.168.1.2) CUCM VMware in same pc (192.168.1.3) please help, thanks memodnet@gmail.com

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-08T15:18:25Z

Hello, Using Wireshark and Fiddler we discovered two things: #1: the authentication request agaisnt UCM returns AUTHORIZED http:/xxx.xxx.xxx.xxx:8080/ccmcip/authenticate.jsp?UserID=xxxxxxx&Password=xxxxxxx&devicename=SEPIPC2525 In spite of this, the phone still returns an Error code 0 #2: When launching IP Communicator, we found a couple 404 errors looking for a tlv file (CTL certificate) Not entirely sure what this may mean Thanks in advance! Paulo Silva

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T21:16:32Z

This has become much more challenging with the Secure URLs and SSL encrypted traffic where it tends to be more helpful to do more diagnostic on the server side.

Re: New Message from David Staudt in IP Phone Services (IPPS) - IP Phone Se

2012-11-07T21:05:48Z

Did you set both the secure and non secure authentication URL on the CUCM? Sent from my mobile device On Nov 7, 2012, at 3:45 PM, "Cisco Developer Community Forums" > wrote: David Staudt has created a new message in the forum "IP Phone Services Questions": -------------------------------------------------------------- A network packet capture (via Wireshark) is usually the best way to inspect the actual authentication request and response for issues (make sure and capture from a PC connected to the phone's extra PC switch port.) Feel free to attach the pcap here. -- To respond to this post, please click the following link: http://developer.cisco.com/web/ipps/community/-/message_boards/view_message/8402824 or simply reply to this email.

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T20:42:54Z

A network packet capture (via Wireshark) is usually the best way to inspect the actual authentication request and response for issues (make sure and capture from a PC connected to the phone's extra PC switch port.) Feel free to attach the pcap here.

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T20:28:46Z

Thanks, Sascha! The answer is yes! The authentication URL has an IP address in it. We setup an End User, associated the particular device with it and associated the user with all the groups in the system...still we get the error mencioned above... Paulo Silva

Re: New Message from Paulo Silva in IP Phone Services (IPPS) - IP Phone Ser

2012-11-07T20:22:48Z

Hi, Is the authentication url reachable from the phone? i.e. if it has the hostname in it, does the phone have dns?

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T20:18:07Z

Hi David, Thank you very much for you quick answer. We have a UCM 8.0 setup where this works like a charm; our customer is running 8.6.1 and no matter what we do to the user, we have had no luck so far. We consistently get for a response. Do you have a couple things we could/should check to get this going? Paulo Silva

RE: CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T20:08:05Z

The IP Phone Services XML interface capabilities are more dependent on the phone model/firmware than the UCM version, but the answer is generally: yes. You should be able to consider the latest available guide/SDK as applicable to the current UCM release, if and until a newer doc/SDK is released.

Automatic reply: New Message from Paulo Silva in IP Phone Services (IPPS) -

2012-11-07T19:59:48Z

I am in training class from Monday to Wednesday with limited network access. If you have emegency situation, please call my cell phone at 646 872 3497.

CiscoIPPhoneExecute and UCM 8.6.1

2012-11-07T19:57:58Z

Hello, Does anybody know if CiscoIPPhoneExecute is available in UCM 8.6.1? I don't seem to be able to find the Cisco IP Phone Services Application Development notes for Call Manager 8.6. Any help appreciated! Thanks in advance, Paulo Silva