A place to discuss what the Jabber SDK can provide to web applications, and to bring suggestions http://developer.cisco.com/c/message_boards/find_category?p_l_id=&mbCategoryId=4556525 2013-05-24T16:40:02Z 2013-05-24T16:40:02Z homer liu http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15440346 2013-05-21T04:15:55Z 2013-05-21T04:15:55Z

David, Thank for your quick and clear feedback very much!  

homer liu 2013-05-21T04:15:55Z David Staudt http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15419713 2013-05-20T16:19:11Z 2013-05-20T16:19:11Z

The incoming video stream appears to be a single stream, so the Jabber SDK would not be able to 'split' out separate streams.  Not aware of any software-based video MCUs - as this is a processing intensive tasks, dedicated hardware is normally required for enterprise quality.

David Staudt 2013-05-20T16:19:11Z homer liu http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15417200 2013-05-20T14:04:10Z 2013-05-20T14:04:10Z

Even though through MCU in the network each endpoint can get a combined stream, could Jabber SDK support to separate the combined stream into original separate video stream ? Besides, is there Cisco SW solution for MCU ? If not, then commercial virtual machine can't be leverage for deployment.

homer liu 2013-05-20T14:04:10Z David Staudt http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15387553 2013-05-18T19:22:29Z 2013-05-18T19:22:29Z

The Jabber SDK video endpoint supports only a single active call at a time, however multi-party video calls would be implemented via a video conferencing bridge (MCU) in the network, which would combine multiple video streams from participants and send a combined stream to each endpoint, much in the way that a conference bridge functions.

David Staudt 2013-05-18T19:22:29Z homer liu http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15386690 2013-05-18T12:35:09Z 2013-05-18T12:35:09Z

Hi,    Can Jabber SDK support multiple-party video softphone ? If yes, could an example be given  for demo ? If no, does any other Cisco service support it ?   Thanks, Homer

homer liu 2013-05-18T12:35:09Z Vibhavaree Gargeya http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15214497 2013-05-14T00:46:34Z 2013-05-14T00:46:34Z

Hi, Christian, The voice and video plugin does not support IPv6. It is on the road map, but there is no committed date for availability yet. -Vibhavaree

Vibhavaree Gargeya 2013-05-14T00:46:34Z Christian Drefke http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15190921 2013-05-13T11:29:57Z 2013-05-13T11:29:57Z

Hello,   we are currentlly in the process of finding a fitting softphone solution for the remote VPN users of one of our customers. The basic challenge is to find a client that can be used in conjunction with CUCM 9.x and that supports IPv6. My question regarding the Jabber SDK is: - Is it possible or planned to support IPv6 for the Voice/Video Plugin of Jabber SDK? - If so, is or will it be possible to use IPv6toIPv4-NAT between the IPV6-only remote user clients and the IPv4/IPv6 CUCM environment?     Thank you and kind regards   Christian Drefke

Christian Drefke 2013-05-13T11:29:57Z Christophe Baehr http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=15019710 2013-05-07T15:51:37Z 2013-05-07T15:51:37Z

Hi Thomas,   I have a question related to this topic. We are currently developping a web based Jabber client (no Jabber for windows here), and we are wondering if it would be possible to place call (like you described earlier). Let's assume you are logged in the web client on Chrome (or FF doesn't matter), then you open a second Tab and make a search on google. Would it be possible to highlight (or whatever) a number in google result and ask the jabber web client to place a call to this number ? Is this something that can be realized with the SDK. Will it ask any installer on the machine, or can it be done like the Jabber client (with registry keys) ?   Thanks for your help Regards Fabian

Christophe Baehr 2013-05-07T15:51:37Z Thomas Vanier http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=14157489 2013-04-11T14:02:56Z 2013-04-11T14:02:56Z

Hi, Cisco Click-to-Call integrates with MS Office, IE and Mozilla Firefox. I do not think there is any plan to add Chrome support unfortunately. Thanks, Thomas

Thomas Vanier 2013-04-11T14:02:56Z Jddd Gddd http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=14091339 2013-04-10T07:18:25Z 2013-04-10T07:18:25Z

Hey Thomas, Thomas thank you for your quick reply; I have seen this video in your old post and I am looking for a simple solution (that just highlight and dial a number via Chrome). the Firefox plugin is called Cisco click to call 8.1.0 Thank you for your help Date: Tue, 9 Apr 2013 11:10:17 -0500 From: cdicuser@developer.cisco.com To: cdicuser@developer.cisco.com Subject: New Message from Thomas Vanier in Jabber Developer - Features and enhancements: RE: CLICK TO DIAL FROM WEB BROWSER? Thomas Vanier has created a new message in the forum "Features and enhancements": -------------------------------------------------------------- Hi J, Working on a JabberSDK-based Chrome extension would be really great, there is an internal proof-of-concept which has not been updated for a while unfortunately http://www.youtube.com/watch?v=oI6Pxa-5zDk What IE/Firefox plugins are you talking about ? Thanks, Thomas -- To respond to this post, please click the following link: http://developer.cisco.com/web/jabber-developer/jabber-voice-forum/-/message_boards/view_message/14051150 or simply reply to this email.

Jddd Gddd 2013-04-10T07:18:25Z Thomas Vanier http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=14051150 2013-04-09T16:10:15Z 2013-04-09T16:10:15Z

Hi J, Working on a JabberSDK-based Chrome extension would be really great, there is an internal proof-of-concept which has not been updated for a while unfortunately [url=http://www.youtube.com/watch?v=oI6Pxa-5zDk]http://www.youtube.com/watch?v=oI6Pxa-5zDk[/url] What IE/Firefox plugins are you talking about ? Thanks, Thomas

Thomas Vanier 2013-04-09T16:10:15Z Jddd Gddd http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=14050332 2013-04-09T15:23:01Z 2013-04-09T15:23:01Z

Dear Thomas,  I couldn't find any chrome extension for Click to call, do you think we will have an extension soon?  Please find the required actions: - highlight a number in Chrome. - Right clik. - select "Call/call with edit" the number highlited and call cisco click to call    This plugin already exists in IE and firefox.   Kind regards J

Jddd Gddd 2013-04-09T15:23:01Z Ting-Hao Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13995787 2013-04-08T16:32:20Z 2013-04-08T16:32:20Z

Driss, You can either try this simple [url=http://developer.cisco.com/web/jabber-developer/im-sample-code1]sample client[/url] or more complex [url=http://developer.cisco.com/web/jabber-developer/on-prem-deployment]samples[/url] on jabberdeveloper.com Thanks, Howard

Ting-Hao Chen 2013-04-08T16:32:20Z driss.benattou (simulated) http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13915681 2013-04-05T10:15:39Z 2013-04-05T10:15:39Z

Hi, Thank you for reply. Effectively, the plugin has been added. but how can i user IM/Presence from Web Browser ?   Regards Driss

driss.benattou (simulated) 2013-04-05T10:15:39Z Ting-Hao Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13871753 2013-04-04T15:59:53Z 2013-04-04T15:59:53Z

Driss, The IM/Presence doesn't need a plugin, I guess you are refering to Voice and Video. After you installed the plugin (It should ask you to close all browsers), you should see "Cisco Web Communicator" listed as part of "Add-on" or "Extension" in your browsers. If not, then you might not have installed correctly. Hope this help Howard

Ting-Hao Chen 2013-04-04T15:59:53Z driss.benattou (simulated) http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13860376 2013-04-04T11:11:09Z 2013-04-04T11:11:09Z

Hi, As Cisco Web communicator offers natively IM/Presence at Browser. when i install this pluggin, i didn't find anything.   Please advise what i have to do ?   Regards Driss

driss.benattou (simulated) 2013-04-04T11:11:09Z Ting-Hao Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13538952 2013-03-26T21:47:19Z 2013-03-26T21:47:19Z

Fabian, Terminal Server 2008R2 is not currently support. The current supported platform are as listed Windows XP/Windows 7 32/64-bit Mac OSX 10.6 (Snow Leopard) and 10.7 (Lion) Internet Explorer 7+, Firefox 6+, Chrome 10+, Safari 5.1 Thanks, Howard

Ting-Hao Chen 2013-03-26T21:47:19Z Christophe Baehr http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13509226 2013-03-26T10:39:54Z 2013-03-26T10:39:54Z

Hi, This is Windows environment. Terminal Server 2008R2. Regards Fabian

Christophe Baehr 2013-03-26T10:39:54Z Ting-Hao Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13493126 2013-03-25T21:35:23Z 2013-03-25T21:35:23Z

Fabian, What kind of thin client it is? VXI is not supported.   Thanks, Howard

Ting-Hao Chen 2013-03-25T21:35:23Z Christophe Baehr http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13471553 2013-03-25T13:29:27Z 2013-03-25T13:29:27Z

Hi,   We have a customer using only thin client in their environment and that would like to use collaboration tool. An idea would be to use the jabber SDK in an intranet webpage. Could you please tell me if the Jabber SDK (and Cisco Web Communicator Plugin) can run on thin client ?   Thanks for your help Regards Fabian

Christophe Baehr 2013-03-25T13:29:27Z