« Back to Cisco JTAPI Questions

SIP Reason code inside the JTapi cisco cause codes whne a call hangup

Combination View Flat View Tree View
Threads [ Previous | Next ]
SIP Reason code inside the JTapi cisco cause codes whne a call hangup
Answer
4/5/12 10:36 PM
HI to all,
I'm trying to read the SIP reason code I put inside the Bye command via the SIPP tool.
I'd like to read this code when a call hangs up.
Scenario is:
Asterisk connected to CUCM via a SIP Trunk. My client would receive special reason code, from the calling phone, when the caller hansg up.
 
Can I obtain this code in the cisco cause code inside some JTapi events such as
CallCtlConnFailedEv or in a TermConDroppedEv ?
 
Thanks to anyone who wants to help me, this is very important for me.
Flag

RE: SIP Reason code inside the JTapi cisco cause codes whne a call hangup
Answer
4/6/12 12:07 AM as a reply to Stefania Oliviero.
I also have an Asterisk server interfacing with the CCM via a SIP trunk. However, I haven't programmed anything with it and so have 0 practical experience with it. I did have an idea when reading your post that I figured wouldn't hurt to throw out there - maybe it'll help.

The Cisco JPAPI interface is basically an extension of regular JTAPI. You might be able to use the standard JTAPI events, rather than their Cisco-specific implementations, to retrieve the information you're looking for.

It's worth a shot at least...
Flag

RE: SIP Reason code inside the JTapi cisco cause codes whne a call hangup
Answer
4/6/12 10:10 AM as a reply to James Wagner.
Thank for your answer. I log all events received from CUCM, but I don't see any cause or reason that I've customized in the SIP protocol.

Is there a way to put a custom cause or reason code so I can then read with JTapi Events ?
Flag

RE: SIP Reason code inside the JTapi cisco cause codes whne a call hangup
Answer
4/6/12 5:31 PM as a reply to Stefania Oliviero.
In addition to the standard getCause() and getCallCtrlCause(), Cisco extenstions has getCiscoCause(). If you haven't tried it already, you can give it a spin. 
 
Flag

RE: SIP Reason code inside the JTapi cisco cause codes whne a call hangup
Answer
4/10/12 1:37 PM as a reply to Mohan Potluri.
I've found the solution:
I put on the BYE SIP Command the following field:

Reason: Q.850;cause=6

so I can then read it with Cisco Extention getCiscocause().
I use the Q.850 codes (6 is an example). Also on the IPPhone I can view the descriptions associated with the codes.
Flag