Primary Server Post Installation http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=4877222 2013-05-22T22:42:56Z 2013-05-22T22:42:56Z Chikeobi Njaka http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4891071 2011-12-14T00:54:44Z 2011-12-14T00:54:44Z

[quote]Hello Chikeobi,   You may be receiving this error because you might not have configured the DNS server at the time of installation.   You should try condiguring the DNS server using the "set network dns" CLI command and try this screen again.   Thanks, Mayank  [/quote] Hi Mayank, I didn't configure DNS because step 14 in the installation says to set it to NO. In anycase, setting it to yes would mean also configuring reverse lookup. That is problematic in my environment. I did configure it, though and the problem persists.

Chikeobi Njaka 2011-12-14T00:54:44Z Mayank Agarwal http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4888917 2011-12-13T20:01:18Z 2011-12-13T20:01:18Z

Hello Chikeobi,   You may be receiving this error because you might not have configured the DNS server at the time of installation.   You should try condiguring the DNS server using the "set network dns" CLI command and try this screen again.   Thanks, Mayank  

Mayank Agarwal 2011-12-13T20:01:18Z Chikeobi Njaka http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4883401 2011-12-13T00:40:06Z 2011-12-13T00:40:06Z

Hello Chikeobi, You need use a browser to connect to the Administration UI by pointing your browser to http://<hostname or ip address> Regards, Nick Hi Nick, Fiannly got it to work. Don't know what I did wrong. I now face a different problem. I can't seem to configure the Call Control Service Provider. Screen shot is provided. Thanks.

Chikeobi Njaka 2011-12-13T00:40:06Z Karamjit Singh http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4880360 2011-12-11T22:01:48Z 2011-12-11T22:01:48Z

Hello Chikeobi, You need use a browser to connect to the Administration UI by pointing your browser to http://<hostname or ip address> Regards, Nick

Karamjit Singh 2011-12-11T22:01:48Z Chikeobi Njaka http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4877221 2011-12-11T12:21:40Z 2011-12-11T12:21:40Z

Hi, In the installation manual, it mentions "Post Installation" procedure, but I can't see any reference as to how to kink start this process. After installtion, all I get is the CLI login prompt. But according to the docs, I should "see the Cisco Media Sense First Server Setup Wizard". I see no such thing. I have installed twice to see if I missed anything, but I don't think I did. I was also supposed to see a link of some sort. Any help will be appreciated. Thanks.

Chikeobi Njaka 2011-12-11T12:21:40Z