Blogs

Check out the new content on the Cisco Developer Network reflecting the New & Enhanced features in Cisco Unified Communication Manager 9.1.

See the new 9.1 SIP Documentation ...Read More

 

The Unified Communications 9.0 Partner Bundle packages Cisco’s Collaboration application software for our Collaboration partner community to leverage for their internal lab or demonstration systems. The 9.0 version is now available for order. Learn More >> ...Read More

 

Silent Monitoring & Recording Partners:

Please review the latest updates to our supported device matrix here: http://developer.cisco.com/web/sip/wikidocs

Regards,

George Gary, Product Manager ...Read More

 

Developer Partners,

Cisco announces the availability of our 2012 Developer Partner presentations shared at CiscoLive San Diego.

Please log into the Cisco Developer Network using your Partner UserID to download this content.

Access these presentations here: http://developer.cisco.com/web/cdc/devforumpreso PARTNER LOGIN REQUIRED
...Read More

 

Developer Partners,

Cisco announces the availability of our 2012 Developer Partner presentations shared at CiscoLive London.

Please log into the Cisco Developer Network using your Partner UserID to download this content.

Access these presentations here: http://developer.cisco.com/web/cdc/devforumpreso PARTNER LOGIN REQUIRED
...Read More

 

Showing 1 - 5 of 21 results.
Items per Page 5
of 5
First Previous Last

Forums

« Back to SIP Trunk Questions

Calls will not transfer from SIP Trunk to MGCP gateway

Combination View Flat View Tree View
Threads [ Previous | Next ]
Calls will not transfer from SIP Trunk to MGCP gateway
cisco call manager trunks sip trunk outbound call
Answer
7/13/10 8:25 PM
Hello All,
 
I have a UCM version 8.02 utilizing an internal SIP Trunk to an IVR (server).  The SIP Trunk functionality works well to the IVR, but if I initiate a transfer from the IVR to an outside number the call fails.  The call from the IVR utilizing a SIP trunk attempts to transfer to my 2811 voice gateway configured as MGCP.  The 2811 has 2 PRI trunks connected to a CO simulator (Hammer), which through scripting will answer the calls.  I can make an outbound call through the PRI Trunk group from the IVR, IP phone or SIP phone connected to the UCM but if I try to initiate a call transfer from the IVR using the SIP trunk, the call fails.
 
Here is the strange part, if I connect the UCM and IVR  to an H.323 gateway instead of the MGCP gateway the call transfer works like a champ.
 
This is a Lab environment so there is no Calling Search Space setup.
 
 
I'm guessing there is a config issue with the 2811?  But not sure on that.
 
Any help would be greatly appreciated.
 
Thank you...Frank
Flag

RE: Calls will not transfer from SIP Trunk to MGCP gateway
Answer
7/27/10 6:16 PM as a reply to FRANK KRAMARSKI.
There could be possibly some setup problem as you suspect, for an
general troubleshoot, clarify the following things
1. I intially doubt, if this is due to any calling search space and route pattern
mismatch between the SIP trunk and the MGCP gateway, please have a check
on that.
2. Is the scenario involves a consult transfer, wherein
(as you say, I can make an outbound call through the PRI Trunk group
from the IVR, IP
phone or SIP phone connected to the UCM ) the initail consultation call
goes through and then if you try to transfer then the transfer/call
fail?
3. If the above said scenario is true, there could be a
Codec mismatch between the parties. Try to check the MGCP and end point
codec match.
4. Try to investigate more into the logs and when
did you get the the
error message? and what is the error message?
 
Reagards...
Giggesh
Flag

Collateral


No files available