Blogs

Limitations of Tracking Hardware Events in SRE-V
Brett Tiller | 27 Feb 2013

There are limitations in SRE-V regarding tracking real time hardware events such as the failure of a hard drive. The Service Ready Engine Virtualization platform (SRE-V) has VMware ESXI 5.0 built into the platform which provides virtualization, and SRE-V installs onto the Service Ready Engine (SRE) service module . ESXI utilizes a technology called CIM as well as SNMP with some limitations to track hardware events. SRE-V uses a software RAID developed by Promise and the release implemented d ...Read More

SRE-V 2.0.1 New Release Upgrade Information
Brett Tiller | 15 Dec 2011

SRE-V 2.0.1 leverage VMware vSphere Hypervisor 5.0 to provide full virtualization for virtual machines (VM). Customers utilizing previous releases of Cisco SRE-V must upgrade their licenses in order to use the Cisco SRE-V 2.0 software.

As of January 4, 2012, all new orders for Cisco SRE-V licenses will ship with VMware vSphere Hypervisor 5.0 license activation codes or VMware vSphere Hypervisor 5.0 license keys if the licenses are ordered with the Cisco SRE hardware.
...Read More

SRE-V 1.1.1 Release Adds Raid Support
Brett Tiller | 16 May 2011

The recently released Service Ready Engine Virtualization 1.1.1 release adds Raid 0 and Raid 1 support on SM-900 service modules. When installing the SRE-V platform onto the SM-900 service module you may now select from the options of Non-Raid, Raid 0 or Raid 1.
...Read More

Upgrading IOS Images on the ISR
Brett Tiller | 21 Apr 2011

Upgrading your IOS image on the Integrated Service Router is a relatively straight forward procedure, but with several steps. After the desired IOS image has been downloaded, there are a few pre-upgrade steps that should be taken before upgrading the IOS image on the router. These steps along with the entire upgrade process have been provided below.

The official IOS upgrade documentation is also available here: ...Read More

Service Ready Engine Virtualization (SRE-V) 1.0.1 Released
Brett Tiller | 07 Feb 2011

The release of the new Cisco Borderless Network product Service Ready Engine Virtualization (SRE-V), provides the next generation of virtualization functionality for partners desiring to run server applications on the router. Utilizing VMware ESXi as its built-in engine, SRE-V features support of Windows 2003 and 2008 servers on which virtual machines can be created, monitored and maintained via VMware's vSphere client. With this new feature, packaging and porting applications as previous ...Read More

Showing 5 results.

Forums

« Back to SRE-V Technical Questions

can i add one more sre-910 on cisco 3945

Post New Thread

Showing 1 - 20 of 25 results.

First Previous Next Last

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	can i add one more sre-910 on cisco 3945 Answer 4/6/12 6:32 PM Mark as an Answer Submit Reply with Quote Quick Reply Hi Radhika, i have one 3945e router on which one sre-910 is already installed and working with one vm with sre-v,can i installed one more sre-910 on the same router with sre-v. Regards Kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Anurag Gurtu Posts: 62 Join Date: 4/2/08 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/26/12 5:22 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Yes you can have upto 4 SREs running SRE-V in 3945e / 3945 chassis. Thanks Anurag Gurtu, CISSP
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/26/12 6:07 PM as a reply to Anurag Gurtu. Mark as an Answer Submit Reply with Quote Quick Reply Hi Radhika, i have one 3945e router on which one sre-910 is already installed and working with one vm with sre-v,can i installed one more sre-910 on the same router with sre-v. Regards Kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/26/12 6:20 PM as a reply to Anurag Gurtu. Mark as an Answer Submit Reply with Quote Quick Reply Hi anurag, Thanks for your reply. can i use the same gateway and network for another sre-910. Regards kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Anurag Gurtu Posts: 62 Join Date: 4/2/08 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/26/12 6:22 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Yes, you can use the same gateway for other SREs.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 5:42 PM as a reply to Anurag Gurtu. Mark as an Answer Submit Reply with Quote Quick Reply Hi , i am not able to install sre-v on another sre-910 blade. sre status is Router#service-module sm 2/0 status Service Module is Cisco SM2/0 Service Module supports session via TTY line 130 Service Module is failed Service Module heartbeat-reset is enabled Service Module is in fail open Service Module status is not available No install/uninstall in progress Local Partition Info ===================== Please reset module to retrieve partition information if needed can not ping TFTP from bootloader menu. router configuration is interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto ! interface GigabitEthernet0/1 ip address 10.65.157.175 255.255.254.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto ! interface SM1/0 ip unnumbered GigabitEthernet0/1 service-module ip address 10.65.157.176 255.255.254.0 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.65.157.175 ! interface SM1/1 description Internal switch interface connected to Service Module no ip address ! interface SM2/0 ip unnumbered GigabitEthernet0/1 service-module fail-open service-module ip address 10.65.157.180 255.255.254.0 service-module ip default-gateway 10.65.157.175 ! interface SM2/1 description Internal switch interface connected to Service Module no ip address ! interface Vlan1 no ip address shutdown ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 10.65.156.1 ip route 10.65.157.176 255.255.255.255 SM1/0 ip route 10.65.157.177 255.255.255.255 SM1/0 ip route 10.65.157.180 255.255.255.255 SM2/0 ! ! ! Regards Kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 5:50 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Can you please provide us the error message you get when you try to install? After you start the install you can session into the module “service-module sm 2/0 session” and observe what is going on the module side. If you can give us the console log from here that would be helpful. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 9:42 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , i am not able to install sre-v on another sre-910 blade. sre status is Router#service-module sm 2/0 status Service Module is Cisco SM2/0 Service Module supports session via TTY line 130 Service Module is failed Service Module heartbeat-reset is enabled Service Module is in fail open Service Module status is not available No install/uninstall in progress Local Partition Info ===================== Please reset module to retrieve partition information if needed can not ping TFTP from bootloader menu. router configuration is interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto ! interface GigabitEthernet0/1 ip address 10.65.157.175 255.255.254.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto ! interface SM1/0 ip unnumbered GigabitEthernet0/1 service-module ip address 10.65.157.176 255.255.254.0 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.65.157.175 ! interface SM1/1 description Internal switch interface connected to Service Module no ip address ! interface SM2/0 ip unnumbered GigabitEthernet0/1 service-module fail-open service-module ip address 10.65.157.180 255.255.254.0 service-module ip default-gateway 10.65.157.175 ! interface SM2/1 description Internal switch interface connected to Service Module no ip address ! interface Vlan1 no ip address shutdown ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 10.65.156.1 ip route 10.65.157.176 255.255.255.255 SM1/0 ip route 10.65.157.177 255.255.255.255 SM1/0 ip route 10.65.157.180 255.255.255.255 SM2/0 ! ! ! Regards Kshitij -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5359959> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:00 PM as a reply to Radhika Miriyala. Mark as an Answer Submit Reply with Quote Quick Reply Hi, when i try to seession on sm 2/0 it shows Router#service-module sm 2/0 session Trying 10.65.157.175, 2130 ... % Connection refused by remote host Regards Kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 6:07 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Can you try clearing session using the command “service-module sm 2/0 session clear” and the n try session command again. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:00 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, when i try to seession on sm 2/0 it shows Router#service-module sm 2/0 session Trying 10.65.157.175, 2130 ... % Connection refused by remote host Regards Kshitij -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360044> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:12 PM as a reply to Radhika Miriyala. Mark as an Answer Submit Reply with Quote Quick Reply Router#service-module sm 2/0 session clear ? <cr> Router#service-module sm 2/0 session clear Router#service-module sm 2/0 session Trying 10.65.157.175, 2130 ... Open Time-out from RBIP response wait loop Time-out from RBIP response wait loop Time-out from RBIP response wait loop
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:20 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Hi, SRE installation step 1 failed Abort initiated due to RBIP timeout Time-out from RBIP response wait loop Time-out from RBIP response wait loop Valid link not established Valid link not established Loading disk:/bzImage ... done. Unable to load image Error: Selected disk does not exist (21) ÿnable to boot image Initializing memory #1. Please wait... Initializing memory #2. Please wait... This may take a minute.... Serial ATA Port 0 : ST9500620NS Serial ATA Port 1 : ST9500620NS DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Valid link not established Please enter '***' to change boot configuration: Detect and Initialize network device Valid link not established Backup current platform configurations.... SRE step 1 - SM registration... Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed Local install not supported Time-out from RBIP response wait loop Time-out from RBIP response wait loop
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 6:24 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Can you reset the sm module the CLI “service-module sm 2/0 reset” command and then enable the debug on ios using the command “debug scp install all” and give us the output of the debug commands. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:20 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, SRE installation step 1 failed Abort initiated due to RBIP timeout Time-out from RBIP response wait loop Time-out from RBIP response wait loop Valid link not established Valid link not established Loading disk:/bzImage ... done. Unable to load image Error: Selected disk does not exist (21) ÿnable to boot image Initializing memory #1. Please wait... Initializing memory #2. Please wait... This may take a minute.... Serial ATA Port 0 : ST9500620NS Serial ATA Port 1 : ST9500620NS DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Valid link not established Please enter '***' to change boot configuration: Detect and Initialize network device Valid link not established Backup current platform configurations.... SRE step 1 - SM registration... Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed Local install not supported Time-out from RBIP response wait loop Time-out from RBIP response wait loop -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360075> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:27 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Hi, still there is one sre-901 is working with one running vm,will it interrupt any services for that vm? Regards Kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Radhika Miriyala in Service Ready Engine Virtualizatio Answer 3/27/12 6:28 PM as a reply to Radhika Miriyala. Mark as an Answer Submit Reply with Quote Quick Reply Forgot to mention that after you enable the debugs please try install so we can see debug messages. From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:24 AM To: cdicuser@developer.cisco.com Subject: New Message from Radhika Miriyala in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Radhika Miriyala has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Can you reset the sm module the CLI “service-module sm 2/0 reset” command and then enable the debug on ios using the command “debug scp install all” and give us the output of the debug commands. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:20 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, SRE installation step 1 failed Abort initiated due to RBIP timeout Time-out from RBIP response wait loop Time-out from RBIP response wait loop Valid link not established Valid link not established Loading disk:/bzImage ... done. Unable to load image Error: Selected disk does not exist (21) ÿnable to boot image Initializing memory #1. Please wait... Initializing memory #2. Please wait... This may take a minute.... Serial ATA Port 0 : ST9500620NS Serial ATA Port 1 : ST9500620NS DDR Memory 4096 MB detected Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz BIOS SM 3.52.8, BIOS Build date: 02/08/2011 System now booting... Please wait... Please press P to select Primary Boot Loader ... or S to select Secondary Boot Loader ... or wait to boot from default configuration ... ....................................................................................................... SRE module get located and run.... Now booting from secondary boot loader.... Authenticating boot loader.... Secondary Boot Loader authenticated - booting.... Valid link not established Please enter '***' to change boot configuration: Detect and Initialize network device Valid link not established Backup current platform configurations.... SRE step 1 - SM registration... Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed Local install not supported Time-out from RBIP response wait loop Time-out from RBIP response wait loop -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360075> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360085> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 6:29 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Resetting sm 2/0 should not interrupt anything on sm 1/0. The Vm on sm 1/0 should continue to work. From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:28 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, still there is one sre-901 is working with one running vm,will it interrupt any services for that vm? Regards Kshitij -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360095> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:40 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Hi, Router#$ule sm 2/0 install url ftp://192.168.1.2/sre-v-k9-r.SPA.smv.2.0.1.pkg Proceed with installation? : yes Router# [Resuming connection 1 to 10.65.157.175 ... ] Initializing memory #1. Please wait... Detect and Initialize network device Valid link not established Backup current platform configurations.... SRE step 1 - SM registration... Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed Local install not supported Time-out from RBIP response wait loop Time-out from RBIP response wait loop
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 6:45 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply From the output below the following looks suspicious. Detect and Initialize network device Valid link not established A few questions: 1)Did you just install the module in the router? 2) Did you plug in the module using OIR ? That is when the router is powered on? From the error message it looks like the networking device is not booting as expected and so the IOS to service module communication could be effected.? Would it be possible to reseat the module or power cycle the router? Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:40 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, Router#$ule sm 2/0 install url ftp://192.168.1.2/sre-v-k9-r.SPA.smv.2.0.1.pkg Proceed with installation? : yes Router# [Resuming connection 1 to 10.65.157.175 ... ] Initializing memory #1. Please wait... Detect and Initialize network device Valid link not established Backup current platform configurations.... SRE step 1 - SM registration... Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed Local install not supported Time-out from RBIP response wait loop Time-out from RBIP response wait loop -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360111> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:47 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Hi, I plugged the blade when the router was on and working. Regards kshitij
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization Answer 3/27/12 6:52 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply Did you follow the oir procedure after you inserted the module? Did you issue the cli: hw-module sm 2 oir-start After you inserted the module? Can you try this and see if anything changes? From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, March 27, 2012 10:48 AM To: cdicuser@developer.cisco.com Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: can i add one more sre-910 on cisco 3945 Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, I plugged the blade when the router was on and working. Regards kshitij -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/5360128> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Kshitij Purwar Posts: 40 Join Date: 7/22/11 Recent Posts	RE: can i add one more sre-910 on cisco 3945 Answer 3/27/12 6:54 PM as a reply to Kshitij Purwar. Mark as an Answer Submit Reply with Quote Quick Reply no i didnt use this command. can i run it now.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Showing 1 - 20 of 25 results.

First Previous Next Last

Collateral

No files available

Developer Network

Service Ready Engine Virtualization Developer Center

Blogs

Forums

can i add one more sre-910 on cisco 3945

Collateral

Technologies

Technologies

Technologies

Network Membership

About Cisco

Log In

Developer Network

can i add one more sre-910 on cisco 3945

Technologies

Technologies

Technologies

Network Membership

About Cisco