Configure External Interface on SRE-V SM http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=9993223 2013-05-22T20:01:41Z 2013-05-22T20:01:41Z Radhika Miriyala http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=10006371 2013-01-07T18:51:09Z 2013-01-07T18:51:09Z

Hi Safiye, The External interface on Sm 700 module does not show up on the Router IOS side. You will need to configure this via vsphere client. Please create a new VM network port group using vmnic0 which is the external port on SM-SRE blades. Once you create this please move the Ubuntu’s ethernet adapter to this newly created port group. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, January 07, 2013 5:43 AM To: cdicuser@developer.cisco.com Subject: New Message from Safiye turgut in Service Ready Engine Virtualization - SRE-V Technical Questions: Configure External Interface on SRE-V SM Safiye turgut has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, I am attempting to configure the external interface on a SRE-V module and it doesn't appear to be working. The SM is a 700 series and it is in a Cisco 2921router. I want to process packets which come from this external interface. I use ubuntu IOS on vmware. I connected the external interface to a switch in our lab and ensure the cable is working. I attached the vsphere network configuration. I can not see external interface on the vm. Please advise me what cal I do? The SM is configured with the following: interface SM1/0 ip address 10.231.14.17 255.255.255.248 service-module ip address 10.231.14.18 255.255.255.248 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.231.14.17 end interface SM1/0 ip address 10.231.14.17 255.255.255.248 service-module ip address 10.231.14.18 255.255.255.248 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.231.14.17 end interface SM1/1 description Internal switch interface connected to Service Module switchport mode trunk -- To respond to this post, please click the following link: http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/9993222 or simply reply to this email.

Radhika Miriyala 2013-01-07T18:51:09Z Safiye turgut http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=9993222 2013-01-07T13:43:13Z 2013-01-07T13:43:13Z

Hi, I am attempting to configure the external interface on a SRE-V module and it doesn't appear to be working. The SM is a 700 series and it is in a Cisco 2921router. I want to process packets which come from this external interface. I use ubuntu IOS on vmware. I connected the external interface to a switch in our lab and ensure the cable is working. I attached the vsphere network configuration. I can not see external interface on the vm. Please advise me what cal I do? The SM is configured with the following: interface SM1/0 ip address 10.231.14.17 255.255.255.248 service-module ip address 10.231.14.18 255.255.255.248 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.231.14.17 end interface SM1/0 ip address 10.231.14.17 255.255.255.248 service-module ip address 10.231.14.18 255.255.255.248 !Application: VMware ESXi 5.0.0 build-474610 running on SRE service-module ip default-gateway 10.231.14.17 end interface SM1/1 description Internal switch interface connected to Service Module switchport mode trunk        

Safiye turgut 2013-01-07T13:43:13Z