Hi Toms,



Please refer to the install guide . It has a configuration with multiple vlans.



http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html



Regards,

Ashwin.



From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Saturday, August 20, 2011 5:39 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation



Toms Jacob has created a new message in the forum "Technical Questions":

--------------------------------------------------------------
Dear Sir,
I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
I did the configuration for CME.
I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
1. ISRG2 Router
2. SM-SRE-700-K9
3. EHWIC - 4 Port

I have two Vlan
Data : 10.31.180.0 /25
Voice: 10.31.180.128 /25

I don't want to configur other than the above vlans. I have to use the MGF functionality.

Please send me a sample configuration

Regards
Toms
Banque Saudi Fransi
Voice communication section manager
--
To respond to this post, please click the following link:

<http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>

or simply reply to this email.

Hi,
Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
Is this will use for Router Traffic also?
 

I will be in PTO on 1st and 2nd Sep and will be in office from Monday 5th sep.

No this command is not required if you are using 1.5 image.

Thanks

Anurag Gurtu

On Sep 3, 2011, at 7:55 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote:

> Toms Jacob has created a new message in the forum "Technical Questions":
>
> --------------------------------------------------------------
> Hi,
> Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
> Is this will use for Router Traffic also?
>
> Also in one document I saw <font face="Courier" size="1"><font face="Courier" size="1">
> service-module mgf ip address 10.
> </font></font><font face="Courier" size="1">
>
> </font>
> P.30.2 255.255.255.0<font face="Courier" size="1"><font face="Courier" size="1">
>
> </font></font><font face="Courier" size="1">
>
> </font>
> Is this command is really required ? In the installation and configuration guide I cannot find this.
>
>
> Hi Toms,
>
>
>
> Please refer to the install guide . It has a configuration with multiple vlans.
>
>
>
> http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html
>
>
>
> Regards,
>
> Ashwin.
>
>
>
> From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
> Sent: Saturday, August 20, 2011 5:39 AM
> To: cdicuser@developer.cisco.com
> Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
>
>
>
> Toms Jacob has created a new message in the forum "Technical Questions":
>
> --------------------------------------------------------------
> Dear Sir,
> I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
> I did the configuration for CME.
> I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
> 1. ISRG2 Router
> 2. SM-SRE-700-K9
> 3. EHWIC - 4 Port
>
> I have two Vlan
> Data : 10.31.180.0 /25
> Voice: 10.31.180.128 /25
>
> I don't want to configur other than the above vlans. I have to use the MGF functionality.
>
> Please send me a sample configuration
>
> Regards
> Toms
> Banque Saudi Fransi
> Voice communication section manager
> --
> To respond to this post, please click the following link:
>
> <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>
>
> or simply reply to this email.
>
>
> --
> To respond to this post, please click the following link:
>
> <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4443771>
>
> or simply reply to this email.

In my configuration in the router, (MGF Layer2)
I created two Vlan
Vlan 30 and Vlan 40. Vlan 30 is for voice and Vlan 40 is for Data.

For the service module I need to give Ip address from Vlan 30 and Vertual machine (Windows Server) and Branch PC I need to assign the Ip Address from VLAN 40. Rest of the VLAN 30 Ip address I will use for CME IP phones in the Same router. Is this configuration possible?

Because in the documnetation I am seeing only one VLAN created for VM.

Regards
Toms