Developer Network

SRE-V Forums

« Back to SRE-V Technical Questions

RE: New Message from Vijay Raman in Service Ready Engine Virtualization - S

Combination View

Post New Thread

Vijay Raman Posts: 14 Join Date: 7/18/09 Recent Posts	Disk Configuration on SRE-900 Answer 11/4/11 6:23 PM Mark as an Answer Submit Reply with Quote Quick Reply Hi, The installation of sre-v 1.5.1 on sre-900 prompts us for a selection: Please select disk configuration (-1 = nonraid, 0 = raid0, 1 = raid1 ) [-1]: we'd like to find out what the best option is, and how the vmware, guest behaves for each disk configuration. Thanks !
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

John Voss Posts: 19 Join Date: 9/19/08 Recent Posts	RE: New Message from Vijay Raman in Service Ready Engine Virtualization - S Answer 11/4/11 6:31 PM as a reply to Vijay Raman. Mark as an Answer Submit Reply with Quote Quick Reply Hi Vijay, The different RAID options are explained in the SRE-V Install Guide ¿ please take a look at http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1077235 and if you have further questions, let us know. Best Regards, John From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Friday, November 04, 2011 10:24 AM To: cdicuser@developer.cisco.com Subject: New Message from Vijay Raman in Service Ready Engine Virtualization - SRE-V Technical Questions: Disk Configuration on SRE-900 Vijay Raman has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, The installation of sre-v 1.5.1 on sre-900 prompts us for a selection: Please select disk configuration (-1 = nonraid, 0 = raid0, 1 = raid1 ) [-1]: we'd like to find out what the best option is, and how the vmware, guest behaves for each disk configuration. Thanks ! -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4714076> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Vinothkumar Kamalanathan Posts: 5 Join Date: 6/16/11 Recent Posts	SRE is not coming up. Answer 11/7/11 3:15 PM as a reply to Vijay Raman. Mark as an Answer Submit Reply with Quote Quick Reply Hi , I was using the SRE module and now it¿s not working. ISR2951#service-module sM 1/0 status Service Module is Cisco SM1/0 Service Module supports session via TTY line 67 Service Module is trying to recover from error Service Module heartbeat-reset is enabled Service Module status is not available Module resource information: CPU Frequency: 1864 MHz Memory Size: 2530 MB Disk 0 Size: 500107 MB Disk 1 Size: 500107 MB Disk 2 Size: 2055 MB No install/uninstall in progress Local Partition Info - (0 apps) ===================== Retrieving partition information<<<<<<<<<<<<<<<<<<<<< ISR2951# The IOS version on the Cisco router is 2951#sh version Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 24-Mar-11 15:53 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1) ISR2951 uptime is 2 days, 23 hours, 58 minutes System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011 System image file is "flash0:c2951-universalk9-mz.SPA.151-4.M.bin" Thanks, Vinothkumar K
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Ashwin Venkatesan Posts: 36 Join Date: 8/12/10 Recent Posts	RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Answer 11/7/11 8:01 PM as a reply to Vinothkumar Kamalanathan. Mark as an Answer Submit Reply with Quote Quick Reply Are you able to session to the blade ? if so is the module in a reboot loop? Thanks, Ashwin
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Brett Tiller Posts: 114 Join Date: 4/9/08 Recent Posts	RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Answer 11/7/11 8:11 PM as a reply to Ashwin Venkatesan. Mark as an Answer Submit Reply with Quote Quick Reply Hi Vinothkumar, As shown by message "System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011", apparently your router crashed. You mentioned tha the service module was working before and then stopped. Did the problem of the SM not loading occur after this crash? You can try completely power down the router, then power it back up and see if that resolves your issue. You can also try powering down the router then removing and reseating the module. If these steps do not resolve your issue, I suggest that you open a service request with TAC to investigate possible issues with the router software/hardware. Opening a service request can be accomplished via the link below. http://tools.cisco.com/ServiceRequestTool/create/launch.do or check the web page below to call TAC directly http://www.cisco.com/cisco/web/support/index.html?overlay=routers Thanks, Brett
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Vinothkumar Kamalanathan Posts: 5 Join Date: 6/16/11 Recent Posts	RE: New Message from Ashwin Venkatesan in Service Ready Engine Virtualizati Answer 11/8/11 12:46 PM as a reply to Vinothkumar Kamalanathan. Mark as an Answer Submit Reply with Quote Quick Reply Hi , It reaching the boot loader ISR2951#service-module sM 1/0 session Trying 10.77.166.113, 2067 ... Open ServicesEngine boot-loader> ServicesEngine boot-loader> --------------------------------------------------------------------------------------------- Brett Tiller has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Vinothkumar, As shown by message "System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011", apparently your router crashed. You mentioned tha the service module was working before and then stopped. Did the problem of the SM not loading occur after this crash? You can try completely power down the router, then power it back up and see if that resolves your issue. You can also try powering down the router then removing and reseating the module. If these steps do not resolve your issue, I suggest that you open a service request with TAC to investigate possible issues with the router software/hardware. Opening a service request can be accomplished via the link below. I have two cards in the router the other SRE card working fine. I reloaded the router as well as the SRE but SRE is not up. Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 11:08 PM To: cdicuser@developer.cisco.com Subject: New Message from Ashwin Venkatesan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Ashwin Venkatesan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Are you able to session to the blade ? if so is the module in a reboot loop? Thanks, Ashwin From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 6:15 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: SRE is not coming up. Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , I was using the SRE module and now it¿s not working. ISR2951#service-module sM 1/0 status Service Module is Cisco SM1/0 Service Module supports session via TTY line 67 Service Module is trying to recover from error Service Module heartbeat-reset is enabled Service Module status is not available Module resource information: CPU Frequency: 1864 MHz Memory Size: 2530 MB Disk 0 Size: 500107 MB Disk 1 Size: 500107 MB Disk 2 Size: 2055 MB No install/uninstall in progress Local Partition Info - (0 apps) ===================== Retrieving partition information<<<<<<<<<<<<<<<<<<<<< ISR2951# The IOS version on the Cisco router is 2951#sh version Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 24-Mar-11 15:53 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1) ISR2951 uptime is 2 days, 23 hours, 58 minutes System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011 System image file is "flash0:c2951-universalk9-mz.SPA.151-4.M.bin" Thanks, Vinothkumar K -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720342> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720747> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Answer 11/8/11 5:48 PM as a reply to Vinothkumar Kamalanathan. Mark as an Answer Submit Reply with Quote Quick Reply Hi, From the bootloader can you issue the command ¿show config¿ and send us the output. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, November 08, 2011 3:46 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Ashwin Venkatesan in Service Ready Engine Virtualizati Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , It reaching the boot loader ISR2951#service-module sM 1/0 session Trying 10.77.166.113, 2067 ... Open ServicesEngine boot-loader> ServicesEngine boot-loader> --------------------------------------------------------------------------------------------- Brett Tiller has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Vinothkumar, As shown by message "System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011", apparently your router crashed. You mentioned tha the service module was working before and then stopped. Did the problem of the SM not loading occur after this crash? You can try completely power down the router, then power it back up and see if that resolves your issue. You can also try powering down the router then removing and reseating the module. If these steps do not resolve your issue, I suggest that you open a service request with TAC to investigate possible issues with the router software/hardware. Opening a service request can be accomplished via the link below. I have two cards in the router the other SRE card working fine. I reloaded the router as well as the SRE but SRE is not up. Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 11:08 PM To: cdicuser@developer.cisco.com Subject: New Message from Ashwin Venkatesan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Ashwin Venkatesan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Are you able to session to the blade ? if so is the module in a reboot loop? Thanks, Ashwin From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 6:15 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: SRE is not coming up. Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , I was using the SRE module and now it¿s not working. ISR2951#service-module sM 1/0 status Service Module is Cisco SM1/0 Service Module supports session via TTY line 67 Service Module is trying to recover from error Service Module heartbeat-reset is enabled Service Module status is not available Module resource information: CPU Frequency: 1864 MHz Memory Size: 2530 MB Disk 0 Size: 500107 MB Disk 1 Size: 500107 MB Disk 2 Size: 2055 MB No install/uninstall in progress Local Partition Info - (0 apps) ===================== Retrieving partition information<<<<<<<<<<<<<<<<<<<<< ISR2951# The IOS version on the Cisco router is 2951#sh version Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 24-Mar-11 15:53 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1) ISR2951 uptime is 2 days, 23 hours, 58 minutes System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011 System image file is "flash0:c2951-universalk9-mz.SPA.151-4.M.bin" Thanks, Vinothkumar K -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720342> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720747> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4724052> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Vinothkumar Kamalanathan Posts: 5 Join Date: 6/16/11 Recent Posts	RE: New Message from Radhika Miriyala in Service Ready Engine Virtualizatio Answer 11/10/11 8:59 AM as a reply to Vinothkumar Kamalanathan. Mark as an Answer Submit Reply with Quote Quick Reply Hi, Output from boot loader.. ServicesEngine boot-loader> show config IP addr: 10.77.166.114 Netmask: 255.255.255.248 TFTP server : 10.77.166.113 GW IP addr: 10.77.166.113 eth int: internal Default Boot: none Bootloader Version: 2.1.37 Bootloader Name: bootloader Default Helper-file: sre-v-installer.SPA.smv.1.5.1 Default bootloader: secondary Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, November 08, 2011 10:18 PM To: cdicuser@developer.cisco.com Subject: New Message from Radhika Miriyala in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Radhika Miriyala has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, From the bootloader can you issue the command ¿show config¿ and send us the output. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, November 08, 2011 3:46 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Ashwin Venkatesan in Service Ready Engine Virtualizati Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , It reaching the boot loader ISR2951#service-module sM 1/0 session Trying 10.77.166.113, 2067 ... Open ServicesEngine boot-loader> ServicesEngine boot-loader> --------------------------------------------------------------------------------------------- Brett Tiller has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Vinothkumar, As shown by message "System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011", apparently your router crashed. You mentioned tha the service module was working before and then stopped. Did the problem of the SM not loading occur after this crash? You can try completely power down the router, then power it back up and see if that resolves your issue. You can also try powering down the router then removing and reseating the module. If these steps do not resolve your issue, I suggest that you open a service request with TAC to investigate possible issues with the router software/hardware. Opening a service request can be accomplished via the link below. I have two cards in the router the other SRE card working fine. I reloaded the router as well as the SRE but SRE is not up. Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 11:08 PM To: cdicuser@developer.cisco.com Subject: New Message from Ashwin Venkatesan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Ashwin Venkatesan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Are you able to session to the blade ? if so is the module in a reboot loop? Thanks, Ashwin From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 6:15 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: SRE is not coming up. Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , I was using the SRE module and now it¿s not working. ISR2951#service-module sM 1/0 status Service Module is Cisco SM1/0 Service Module supports session via TTY line 67 Service Module is trying to recover from error Service Module heartbeat-reset is enabled Service Module status is not available Module resource information: CPU Frequency: 1864 MHz Memory Size: 2530 MB Disk 0 Size: 500107 MB Disk 1 Size: 500107 MB Disk 2 Size: 2055 MB No install/uninstall in progress Local Partition Info - (0 apps) ===================== Retrieving partition information<<<<<<<<<<<<<<<<<<<<< ISR2951# The IOS version on the Cisco router is 2951#sh version Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 24-Mar-11 15:53 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1) ISR2951 uptime is 2 days, 23 hours, 58 minutes System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011 System image file is "flash0:c2951-universalk9-mz.SPA.151-4.M.bin" Thanks, Vinothkumar K -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720342> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720747> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4724052> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4725003> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top

Radhika Miriyala Posts: 174 Join Date: 8/12/10 Recent Posts	RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Answer 11/10/11 5:43 PM as a reply to Vinothkumar Kamalanathan. Mark as an Answer Submit Reply with Quote Quick Reply Hi Vinoth, For some reason the Default boot option is set to none. If the install was successful than default boot option should be ¿chainloader¿. Can you quickly try the cli ¿boot chainloader¿ from the bootloader and see what happens. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Wednesday, November 09, 2011 11:59 PM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Radhika Miriyala in Service Ready Engine Virtualizatio Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, Output from boot loader.. ServicesEngine boot-loader> show config IP addr: 10.77.166.114 Netmask: 255.255.255.248 TFTP server : 10.77.166.113 GW IP addr: 10.77.166.113 eth int: internal Default Boot: none Bootloader Version: 2.1.37 Bootloader Name: bootloader Default Helper-file: sre-v-installer.SPA.smv.1.5.1 Default bootloader: secondary Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, November 08, 2011 10:18 PM To: cdicuser@developer.cisco.com Subject: New Message from Radhika Miriyala in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Radhika Miriyala has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi, From the bootloader can you issue the command ¿show config¿ and send us the output. Thanks, Radhika From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Tuesday, November 08, 2011 3:46 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Ashwin Venkatesan in Service Ready Engine Virtualizati Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , It reaching the boot loader ISR2951#service-module sM 1/0 session Trying 10.77.166.113, 2067 ... Open ServicesEngine boot-loader> ServicesEngine boot-loader> --------------------------------------------------------------------------------------------- Brett Tiller has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Vinothkumar, As shown by message "System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011", apparently your router crashed. You mentioned tha the service module was working before and then stopped. Did the problem of the SM not loading occur after this crash? You can try completely power down the router, then power it back up and see if that resolves your issue. You can also try powering down the router then removing and reseating the module. If these steps do not resolve your issue, I suggest that you open a service request with TAC to investigate possible issues with the router software/hardware. Opening a service request can be accomplished via the link below. I have two cards in the router the other SRE card working fine. I reloaded the router as well as the SRE but SRE is not up. Thanks , Vinothkumar k From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 11:08 PM To: cdicuser@developer.cisco.com Subject: New Message from Ashwin Venkatesan in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtu Ashwin Venkatesan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Are you able to session to the blade ? if so is the module in a reboot loop? Thanks, Ashwin From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com] Sent: Monday, November 07, 2011 6:15 AM To: cdicuser@developer.cisco.com Subject: New Message from Vinothkumar Kamalanathan in Service Ready Engine Virtualization - SRE-V Technical Questions: SRE is not coming up. Vinothkumar Kamalanathan has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi , I was using the SRE module and now it¿s not working. ISR2951#service-module sM 1/0 status Service Module is Cisco SM1/0 Service Module supports session via TTY line 67 Service Module is trying to recover from error Service Module heartbeat-reset is enabled Service Module status is not available Module resource information: CPU Frequency: 1864 MHz Memory Size: 2530 MB Disk 0 Size: 500107 MB Disk 1 Size: 500107 MB Disk 2 Size: 2055 MB No install/uninstall in progress Local Partition Info - (0 apps) ===================== Retrieving partition information<<<<<<<<<<<<<<<<<<<<< ISR2951# The IOS version on the Cisco router is 2951#sh version Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 24-Mar-11 15:53 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1) ISR2951 uptime is 2 days, 23 hours, 58 minutes System returned to ROM by error - a Software forced crash, PC 0x4A9B808 at 09:53:02 UTC Fri Nov 4 2011 System image file is "flash0:c2951-universalk9-mz.SPA.151-4.M.bin" Thanks, Vinothkumar K -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720342> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4720747> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4724052> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4725003> or simply reply to this email. -- To respond to this post, please click the following link: <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4730104> or simply reply to this email.
	Sign in to vote. Flag Please sign in to flag this as inappropriate. Top