Hi Brett,
kindly find the attached logs.
Thanks
kshitij

Attachments:

Brett,
The attachments are not showing up in the email but if you go to the forum you should be able to download. I will send them to you via a separate email

Thanks,
Radhika

From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Tuesday, December 04, 2012 10:18 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: New Message from Kshitij Purwar in Service Ready Engine Virtualization

Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Brett,

There are two text files,sre900 and sre910.

Thanks
kshitij

From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Tuesday, December 04, 2012 11:22 PM
To: cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>
Subject: New Message from Kshitij Purwar in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: find new intresting issue on SRe 3945 router

Kshitij Purwar has created a new message in the forum "SRE-V Technical Questions": --------------------------------------------------------------
Brett Tiller:
Hi Kshitij, Please try attaching the logs again. I don't see them with your post. Thanks, Brett


Hi Brett,
kindly find the attached logs.
Thanks
kshitij
--
To respond to this post, please click the following link: http://developer.cisco.com/web/srev/community/-/message_boards/view_message/9080913 or simply reply to this email.
--
To respond to this post, please click the following link: http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/9081229 or simply reply to this email.

Thanks Brett,

I had tried, but still I am not able to install sre-v on any blade.

As you can see for sre-910,I cannot see any hardware details. I put it on other 3934e router which has default ISO and already running one sre, but still it does not recognize hardware details.

Thanks
kshitij
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Wednesday, December 05, 2012 1:25 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Brett Tiller in Service Ready Engine Virtualization - SRE-V Technical Questions: RE: find new intresting issue on SRe 3945 router

Brett Tiller has created a new message in the forum "SRE-V Technical Questions": -------------------------------------------------------------- Hi Kshitij,

I'm glad that the router now recognizes the 900 and 910 service modules. If you haven't already done so you'll need to configure the SM interfaces for each service module. I've provided a snippet of an example configuration below. You can read more detail about the configuration in the Installation and Configuration Guide section "Configuring the Cisco SRE Service Module Interfaces on the Router". This guide can be downloaded from http://developer.cisco.com/web/srev/documentation . If you've already configured the interfaces, please send your router configuration.
Router Configuration Snippet
interface GigabitEthernet 0/0
ip address 192.168.1.60 255.255.255.0

interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 192.168.1.61 255.255.255.0
service-module ip default-gateway 192.168.1.60

interface SM1/1
switchport mode trunk

interface SM2/0
ip unnumbered GigabitEthernet0/0
service-module ip address 192.168.1.65 255.255.255.0
service-module ip default-gateway 192.168.1.60

interface SM2/1
switchport mode trunk

ip route 192.168.1.61 255.255.255.255 SM1/0
ip route 192.168.1.65 255.255.255.255 SM2/0

Thanks,
Brett
--
To respond to this post, please click the following link: http://developer.cisco.com/web/srev/community/-/message_boards/view_message/9084651 or simply reply to this email.