Welcome to the Cisco TelePresence Developer forum! This forum is for integrators and developers only. The topics should be around device integration and development of solutions with Cisco TelePresence equipment only. This is NOT a product support channel. If you have support related questions please contact your local Cisco representative. Topics not following the above rules may be removed  from the forum. Topics that drift off into flame wars or go way off topic may also be removed without further notice.

« Back to Codec C90/C60/C40

C90 audio mix and tweaks

Combination View Flat View Tree View
Threads [ Previous | Next ]
C90 audio mix and tweaks
Answer
2/22/13 2:46 PM
Is there a good doc/ detail on C90 MIC mixer settings? This would be where you want the 8 MICs to mix input during calls from people in the C90 room during TelePresence calls; of course one can set levels, echo cancellation and such, but a little more on suggested settings, whether MICs will mute below a certain level, AGC, etc. Thanks! Would also be interested in some detail of OSD so customer can make minor tweaks, etc.
Flag

RE: C90 audio mix and tweaks
Answer
2/26/13 2:42 PM as a reply to Gerald Knight.
Hi Gerald, are you using TC Console to do the audio mixing? If not I recommend that you download that application first from this site. Apart from that application I don't know of any documentation on the level you are requesting.

Regarding OSD there is a limited set of tweaks you are able to to. They are documented in the integrator guide for the C90. Anything specific you are after?
 
Cheers,
David
 
Flag

RE: C90 audio mix and tweaks
Answer
2/26/13 2:51 PM as a reply to David Bruun-Lie.
Hi David,
Thanks.

I was talking abount TC Console with one of our leads, so yes, will plan on using it.
Don't think we need anything fancy, but in a conference room would like to make sure that the MICs are balanced and that they mute correctly during calls to minimize background noise at positions where no one is speaking.
Flag

 The forum is moderated by R&D and our aim is to answer your questions as soon as possible. If we cannot resolve your issues immediately we will try to give you feedback indicating when you may expect an answer.

Note that in no circumstances are we able or even allowed to give any promises regarding new products, firmware updates, new features, release dates etc. before they are officially released.

If your question is for a specific product please include both the device type (e.g. Codec C60 or Codec 3000 MXP) and software version (e.g. TC 2.1 or F8.0) for us to be able to answer as accurate as possible.