Welcome to the Cisco TelePresence Developer forum! This forum is for integrators and developers only. The topics should be around device integration and development of solutions with Cisco TelePresence equipment only. This is NOT a product support channel. If you have support related questions please contact your local Cisco representative. Topics not following the above rules may be removed  from the forum. Topics that drift off into flame wars or go way off topic may also be removed without further notice.

« Back to Codec C90/C60/C40

SX20 Touch Panel Mounting

Combination View Flat View Tree View
Threads [ Previous | Next ]
SX20 Touch Panel Mounting
Answer
11/7/12 4:47 PM
Can the touch panel for the SX20 pt. no. CTS-CTRL-DVC8= be wall mounted?  If so what back box would go in the wall?

Posted for Jud Miles of RTKL
Flag

RE: SX20 Touch Panel Mounting
Answer
11/9/12 12:10 PM as a reply to Donald Depperschmidt.
Hi Donald,
the Cisco Telepresence Touch 8" cannot be wall mounted.
Regards,
Jonas
Flag

RE: SX20 Touch Panel Mounting
Answer
1/4/13 2:57 PM as a reply to Jonas Tysso.
 
Good question...
Looking at the unit, it looks like a handy woodworker could pretty easily connect a cleat where the handset attaches.  This would require a bit of work, but once I build a mount, I'll post a picture.  
 
Flag

 The forum is moderated by R&D and our aim is to answer your questions as soon as possible. If we cannot resolve your issues immediately we will try to give you feedback indicating when you may expect an answer.

Note that in no circumstances are we able or even allowed to give any promises regarding new products, firmware updates, new features, release dates etc. before they are officially released.

If your question is for a specific product please include both the device type (e.g. Codec C60 or Codec 3000 MXP) and software version (e.g. TC 2.1 or F8.0) for us to be able to answer as accurate as possible.