TC5.1 module for Crestron? http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=6192867 2013-06-19T18:24:57Z 2013-06-19T18:24:57Z Joe Free http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=16320318 2013-06-18T21:02:23Z 2013-06-18T21:02:23Z

[quote=Jeremy Tuttle]Has anyone experienced problems with the new firmware (6.0) flooding the Crestron with the following: 10:47:20 - 06-18-2013: VTC01_TCPIP_RX$ -> getnameinfo: localhost: Success\x0A 10:47:20 - 06-18-2013: VTC01_TCPIP_RX$ -> Temporary failure in name resolution: Success\x0A It appears it wants the Crestron to tell it something. IP? DNS? Is there a check box that disables this int he Cisco or a command I can respond with that will shut it up? Any help would be greatly appreciated, Jeremy[/quote][size=3][font=arial, helvetica, sans-serif]This is a known issue and has been discussed [url=https://supportforums.cisco.com/thread/2202873]here[/url], and is being tracked by Cisco Bug number [url=https://tools.cisco.com/bugsearch/bug/CSCue72551]CSCue72551[/url].  Updating to the latest firmware should fix the issue. Hope this helps, Joe [/font][/size]

Joe Free 2013-06-18T21:02:23Z Jeremy Tuttle http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=16317431 2013-06-18T20:52:52Z 2013-06-18T20:52:52Z

Has anyone experienced problems with the new firmware (6.0) flooding the Crestron with the following: 10:47:20 - 06-18-2013: VTC01_TCPIP_RX$ -> getnameinfo: localhost: Success\x0A 10:47:20 - 06-18-2013: VTC01_TCPIP_RX$ -> Temporary failure in name resolution: Success\x0A It appears it wants the Crestron to tell it something. IP? DNS? Is there a check box that disables this int he Cisco or a command I can respond with that will shut it up? Any help would be greatly appreciated, Jeremy

Jeremy Tuttle 2013-06-18T20:52:52Z David Bruun-Lie http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13767991 2013-04-02T13:56:14Z 2013-04-02T13:56:14Z

Binesh, once you have the ISDN link paired up with the codec you can use the same commands to call ISDN calls as SIP/H323 only difference is that you HAVE to specify Protocol:320 in dial string. E.g.: "xCommand dial number:12345 Protocol:h320" Cheers, David  

David Bruun-Lie 2013-04-02T13:56:14Z Binesh K http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=13470448 2013-03-25T12:05:25Z 2013-03-25T12:05:25Z

Hi David,   We have a new installation of C series codec with ISDN Link and crestron touch panel. How we can dial ISDN number through crestron touch panel, what will be the command for the same.

Binesh K 2013-03-25T12:05:25Z Jonathan Drennan http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6454550 2012-09-07T02:15:46Z 2012-09-07T02:15:46Z

Hi Gents, Not sure if this is still an open issue. I recently upgraded the C40 here at our office to TC5.1.4 and have not experienced any issues with the Crestron modules utilized here. I am currently using Crestron Module v1.3 via serial. Would be willing to run a few tests to assist if required but testing incoming calls as described above without any issues. Hope this helps, Jon Drennan

Jonathan Drennan 2012-09-07T02:15:46Z David Bruun-Lie http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6270993 2012-08-11T10:56:40Z 2012-08-11T10:56:40Z

[quote]Actually there are several commands that don't work -- example - "Answer incoming Call" -- I have opened the module and this is looking for a totally different string than what at TC5.xxx codec responds with....[/quote]   You'll have to show me what you are getting and what you think the module is looking for. I wrote the module and I am also responsible for the backwards compatibility of the codec API and there should not be any changes...   Cheers, David  

David Bruun-Lie 2012-08-11T10:56:40Z bret.wittmann.ucsf.edu (simulated) http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6272967 2012-08-11T02:17:48Z 2012-08-11T02:17:48Z

Actually there are several commands that don't work -- example - "Answer incoming Call" -- I have opened the module and this is looking for a totally different string than what at TC5.xxx codec responds with....

bret.wittmann.ucsf.edu (simulated) 2012-08-11T02:17:48Z David Bruun-Lie http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6203422 2012-07-31T09:59:53Z 2012-07-31T09:59:53Z

Hi John, The current modules available on this site work with TC 5.1 too. API is backwards compatible.   Regards, David  

David Bruun-Lie 2012-07-31T09:59:53Z John Salter http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6192866 2012-07-27T16:02:54Z 2012-07-27T16:02:54Z

Hello.  I am a CSE supporting a large customer who is supported by an integrator.  The integrator is asking for the updated module for Crestron to support  TC5.1.  I looked around and can not seem to locate the updated module.  Any ideas?  Thanks.

John Salter 2012-07-27T16:02:54Z