Overall Server Status is reported as "Severe Fault" http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=6420237 2013-05-21T15:34:28Z 2013-05-21T15:34:28Z John Devavaram http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6442678 2012-09-06T19:13:08Z 2012-09-06T19:13:08Z

Brett, Jin and team,   The reload of the module, momentarily stops the Severe Fault from appearing for a few hours (may be).   But, the Severe Fault error does appear after some time even after reloading the module/ powering off the router and powering it back on.   Currently, the UCS-E160D-M1/K9 module is running the following versions:   CIMC Firmware: Running Version: 1.0(1.20120607153607)   BIOS Version: 4.6.4.8     Glad to hear that it is fixed in most recent BMC/CIMC image.   Thank you for all your help.   Regards, John  

John Devavaram 2012-09-06T19:13:08Z Brett Tiller http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6428989 2012-09-05T22:55:49Z 2012-09-05T22:55:49Z

Hi John, Our Engineering team says that you can ignore this error message as it is incorrect. This incorrect message is fixed in a later release which we'll post soon. Thanks, Brett

Brett Tiller 2012-09-05T22:55:49Z Jin Zhang http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6431356 2012-09-05T22:38:38Z 2012-09-05T22:38:38Z

John, I believe this error was fixed by a later version of the BMC/CIMC image. Daniel, can you confirm that? Brett, what's the current version of image you have given to John, is it the 0607 one? Thanks, Jin From: Cisco Developer Community Forums <cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>> Reply-To: "cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>" <cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>> Date: Tuesday, September 4, 2012 7:05 PM To: "cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>" <cdicuser@developer.cisco.com<mailto:cdicuser@developer.cisco.com>> Subject: New Message from John Devavaram in Unified Computing System E-Series Servers (UCSE) - Technical Questions: Overall Server Status is reported as "Severe Fault" John Devavaram has created a new message in the forum "Technical Questions": -------------------------------------------------------------- Hello team, We are seeing the following error message on CIMC main page: Overall Server Status is reported as "Severe Fault". Fault Sensors display the following: Threshold Sensors Sensor Name Status Reading Units DDR3_P1_C0_ECC Non-Recoverable Error 253 error Please refer to the attached screen captures for details. Look forward to hearing from you. Thank you, John -- To respond to this post, please click the following link: <http://developer.cisco.com/web/ucse/forums/-/message_boards/view_message/6420236> or simply reply to this email.

Jin Zhang 2012-09-05T22:38:38Z Brett Tiller http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6428954 2012-09-05T22:38:08Z 2012-09-05T22:38:08Z

Hi John, Thanks for the information. I've provided the following request for data and steps below. 1. In CIMC please click on the Inventory link, then the Memory tab and let us know the displayed values. 2. Please reload the server via the router cli 'ucse <slot>/0 reload' and let us know if the fault remains or disappears. Thanks, Brett

Brett Tiller 2012-09-05T22:38:08Z John Devavaram http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6420236 2012-09-13T22:44:51Z 2012-09-05T03:04:27Z

Hello team,   We are seeing the following error message on CIMC main page:   Overall Server Status is reported as "Severe Fault".   Fault Sensors display the following:   Threshold Sensors   Sensor Name Status Reading Units DDR3_P1_C0_ECC Non-Recoverable Error 253 error   Please refer to the attached screen captures for details.   Look forward to hearing from you.   Thank you, John

John Devavaram 2012-09-05T03:04:27Z