Blogs

Introduction

Racktables version 0.20.1 has new feature support for Cisco UCS environments. Racktables is a structured and robust open-source solution for datacenter asset management, that helps document hardware assets, network addresses, space in racks and network configuration.
...Read More

 

I just added a new section to the UCS PowerTool section on the UCS CDN site that will provide a central repository of PoSh scripts, examples, and videos that detail use cases and examples for UCS PowerTool.

Here is the link:
http://developer.cisco.com/web/unifiedcomputing/powertool-examples
...Read More

 

I would like to announce the general availability of goUCS version 2.0 on Cisco Developer Network. A lot of time and effort has been put into the newest goUCS release, with some of the main features being detailed below.

 

Lest anyone thinks I have forgotten about my blogging on the UCS API, I have not, but I have written a blog recently for the Data Center blog and it is applicable to the UCS so I thought I would share the link here along with the blog into.

Early in my career I moved quite a bit, new job, growing family, whatever the reason it seemed like every two or three years we were packing up and going to a new place and meeting our new neighbors.
...Read More

 

Updated and completely revised version 2.0 MP for Cisco UCS is now available for download. Please check the release notes for the complete list of bug fixes ...Read More

 

Showing 1 - 5 of 16 results.
Items per Page 5
of 4
First Previous Last

Forums

« Back to Technical Discussions

RE: New Message from Helmut Pfeiler in Unified Computing UCS Manager - Tech

Combination View Flat View Tree View
Threads [ Previous | Next ]
How to start, stop, reboot a Blade Server via XML API
ucs xml api
Answer
10/8/12 11:51 AM
Hi all
 
I'm new to the UCS and the XML API, so I'm sure this is a stupid question.
I'm able to read blade information via XML API and also to associate  service profile to a blade server.
But till now I did not find a way to start, stop and reboot the blade server via XML API.
 
Could anyone point me to the correct XML command to start, stop and reboot a blade server.
 
Many thanks in advance
Helmut
Flag

Automatic reply: New Message from Helmut Pfeiler in Unified Computing UCS M
Answer
10/8/12 11:53 AM as a reply to Helmut Pfeiler.
I am currently out of office on PTO from Thursday, October 3, 2012 returning to the office Monday, October 8, 2012. I will have limited access to voicemail and email at this time. My responses will be delayed during this time.

Thanks,
Eric Williams
Flag

Automatic reply: New Message from Helmut Pfeiler in Unified Computing UCS M
Answer
10/8/12 11:53 AM as a reply to Helmut Pfeiler.
I am currently OOO, I will be back October 23rd. /Roger
Flag

Automatic reply: New Message from Helmut Pfeiler in Unified Computing UCS M
Answer
10/8/12 11:53 AM as a reply to Helmut Pfeiler.
I'm currently out of the office
Flag

Automatisk svar: New Message from Helmut Pfeiler in Unified Computing UCS M
Answer
10/8/12 11:53 AM as a reply to Helmut Pfeiler.
Jeg er kursus 2012.10.08-12, og besvarer i begrænset omfang mails.
For hastesager kontakt NetDesign tlf. 44358000.
I am on training 2012.10.08-12 and will only react on mails to a limited extent.
In urgent matters please contact NetDesign +4544358000.
Venlig hilsen / best regards Jesper Munk
Flag

RE: New Message from Helmut Pfeiler in Unified Computing UCS Manager - Tech
Answer
10/8/12 11:57 AM as a reply to Helmut Pfeiler.
Helmut,

easiest way to find the required XML is to start wireshark and capture all the data and filter the XML out of it. When you actualy perform those actions. I suppose you can do this as well with the emulator.

Regards
Eelco


________________________________________
Van: Cisco Developer Community Forums [cdicuser@developer.cisco.com]
Verzonden: maandag 8 oktober 2012 13:52
Aan: cdicuser@developer.cisco.com
Onderwerp: New Message from Helmut Pfeiler in Unified Computing UCS Manager - Technical Discussions: How to start, stop, reboot a Blade Server via XML API

Helmut Pfeiler has created a new message in the forum "Technical Discussions": -------------------------------------------------------------- Hi all

I'm new to the UCS and the XML API, so I'm sure this is a stupid question.
I'm able to read blade information via XML API and also to associate service profile to a blade server.
But till now I did not find a way to start, stop and reboot the blade server via XML API.

Could anyone point me to the correct XML command to start, stop and reboot a blade server.

Many thanks in advance
Helmut
--
To respond to this post, please click the following link: or simply reply to this email.
Flag

RE: How to start, stop, reboot a Blade Server via XML API
Answer
10/8/12 2:39 PM as a reply to Helmut Pfeiler.
Hi Helmut,
I know you are specifically looking for help on this with XML.  I just wanted to offer that there are a couple of other tools you can use to manage UCS.  Like you I initially started with the XML API, but then I discovered the UCS PowerTool which is a powershell interface.  Another option is GoUCS which I believe is more of a java centric approach.
 
With the Powertool starting a service profile is as simple as:
Get-UcsServiceProfile -Name esxhost01 | Set-UcsServerPower -State "admin-up" -Force
 
Sage
Flag

RE: How to start, stop, reboot a Blade Server via XML API
Answer
10/8/12 3:43 PM as a reply to Sage Harvey.
Hi Sage
 
Unfortunately the only interface option is the XML API.
So if someone knows the XML to use, that would really help.
 
Many thanks for the answers till now!
 
Helmut
Flag

RE: New Message from Helmut Pfeiler in Unified Computing UCS Manager - Tech
Answer
10/8/12 6:03 PM as a reply to Helmut Pfeiler.
Hello Helmut,



Try this out.



For Power on :



<lsPower><dn=""org-root/ls-testSP/power" state="up"></lsPower>

Where testSP is the name of service profile.



For Power off :

<lsPower><dn=""org-root/ls-testSP/power" state="soft-shut-down"></lsPower>



In case you do not have any service profile associated to your blade, you need to do hard reset :

<computeBlade><adminPower=”hard-reset-immediate” dn=”sys/chassis-1/server-1” lc=”undiscovered”></computeBlade>



Thanks,

Purvi



From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Monday, October 08, 2012 8:44 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Helmut Pfeiler in Unified Computing UCS Manager - Technical Discussions: RE: How to start, stop, reboot a Blade Server via XML API



Helmut Pfeiler has created a new message in the forum "Technical Discussions": -------------------------------------------------------------- Hi Sage

Unfortunately the only interface option is the XML API.
So if someone knows the XML to use, that would really help.

Many thanks for the answers till now!

Helmut
--
To respond to this post, please click the following link: or simply reply to this email.
Flag

RE: How to start, stop, reboot a Blade Server via XML API
Answer
10/12/12 10:57 AM as a reply to Purvi Chokshi.
Hi Purvi
 
Many thanks for your reply - that really helped!!!
 
Many thanks
Helmut
Flag

Collateral


No files available