Blogs

If you just need a simple password control for long distance or international call and don't want to use RADIUS, you can set a parameter in service then in script ask caller to enter password if it matched the one set in IOS configuration then make the call out otherwise disconnect call. A sample script is posted in Documentation section. ...Read More

 

Hi Cisco Developers,

MSE VOIP Sample Application along with User Guide can be found under the below location.
http://developer.cisco.com/web/vgapi/docs

The goal of this sample application is to demonstrate the Integration of IVR(Interactive Voice response) and MSE(Mobility service Engine).
...Read More

 

In IOS 15.2(2)T a new option is introduced for infotag get leg_dnis and infotag get leg_ani

"callnumber" is keyword

infotag get leg_dnis
infotag get leg_ani

example:

infotag get leg_dnis callnumber leg_incoming


This option services the following purposes:

1. Return number portion only for DNIS or ANI in SIP trunk ...Read More

 

The fetchaudio attribute specifies the URI of the audio to be played while the document is being fetched. It can be used with any one of the following VXML Elements <data>; <goto>; <link>; <subdialog>; <submit>

Example: ...Read More

 

Cisco Technology Developer Partners,

Cisco is proud to announce the availability of our Cisco Unified Communications System Release 8.6 Not-For-Resale software bundle on Cisco Marketplace (Partner Login Required).

To purchase the latest Unified Communications NFR Software bundle
- Navigate to Cisco Marketplace
- Login using your Cisco.com UserID ...Read More

 

New Video Tutorial section is added for this Tcl IVR API
Video Tutorial ...Read More

 

param CLI can be mapped to IVR either in the global application mode, or as group params or under the specific dial-peer.

config t
application
service aa flash: app-b-acd-aa.tcl
param aa-pilot 7001

Having the param under the specific dial-peer provides the flexibility by having same application to work with various dial-peers in various ways. ...Read More

 



Cisco Developer Network will be presenting a CDN Developer Track at Cisco Live! London the week of January 31, 2011.

We are presenting technical sessions which highlight Application Programming interfaces (APIs) and Software Developer Kits (SDKs) for Cisco technologies such as Unified Communications, IOS, and Access Routing Technologies ¿ including the new Cisco Cius ...Read More

 

There are a few more tones can be played but are not listed in the programming guide

tn_ringback -- Plays a ring back tone
tn_congestion -- Play a congestion tone
tn_stuttdial -- plays a stutter dial tone
tn_intercept --plays a intercept tone, like busy tone

For example I have to use "leg setup $dest callinfo" for a reason ...Read More

 

Ultimate AA script


Suffering the AA menu prompt tree changing that you need to modify the script frequently? Or trying to find an AA script can fit all menu prompt tree?
You really can create an ultimate script that can fit all prompt structure
Here is the solution: ...Read More

 

I would like to shed some light on IPIPGW concept and its features.
IPIPGW Over TCL-VXML scripts:
We can deploy TCL and VXML scripts on IPIPGW,where DSP¿s are not requried to use this feature.You have to record prompt in the same codec type as you use for a call.This feature will be useful when we deploy prepaid calling cards.
IPIPGW : ...Read More

 

If we download the complete book length programming guide, the information tag leg_state and the status for that lg_xxx are missed.
But if we download chapter by chapter we can get those information.

Here is the link:

http://www.cisco.com/en/US/docs/ios/voice/tcl/developer/guide/tclivrv2_ch5.html


Leg State
The state of the call leg and the corresponding status code is reported in lg_xxx format:
Value for xxx Call Leg
000 LEG_INIT ...Read More

 



There is a perspective that TCL-IVR applications are not flexible enough for a newbie to play around. But in fact, there are lots of IVR applications that are coming inbuilt with Voice GW. You just need to copy/paste in a file editor and tweak it.
...Read More

 

Showing 13 results.
Items per Page 20
of 1
First Previous Next Last

Forums

« Back to VXML-API

maxtime as variable in <transfer>

Combination View Flat View Tree View
Threads [ Previous | Next ]
maxtime as variable in <transfer>
transfer
Answer
2/16/12 6:04 AM
Hi
I want to pass attr maxtime as variable in my vxml script:
<var name="dur"/>
<form id="transfer" scope="document">
<block>
<assign name="dur" expr="1000"/>
<log expr=" '****** maxtime as: ' + dur"/>
</block>
<transfer name="mycall" bridge="true" dest="tel:+2385839" maxtime="dur">
<filled>
<log expr=" '****** Duration of call is:' + mycall$.duration"/>
</filled>
</transfer>
but debug gives out an error:
at line 13: <duration> attribute with invalid value (dur)
when i used attr maxtimeexpr="dur" a transfer successful, but debug output gives:
   at line 13: : <transfer maxtimeexpr> Unknown attlist
and call duration not limited:
   name=mycall
   URI(abs):tel:+2385839
   scheme=tel
   path=+2385839 bridge=1 connecttimeout=0 maxtime=0
My ios version 12.4(11)XW7. How can i limit maxtime using a variable?
Flag

RE: maxtime as variable in <transfer>
Answer
2/10/12 6:47 AM as a reply to Vadim Burcheganov.
Hi Vadim,

Please let us know is there any specific reasons for passing the maxtime attribute as variable in the <transfer>? If so we will try out and let you know the results.

Since the syntax says we can specify the maxtime in the following way

Express time interval as an unsigned number followed by either s for time in
seconds or ms for time in milliseconds (the default).

So it is better to use the maxtime as following

<transfer name="MyCall" dest="tel:+1817" bridge="true" connecttimeout="20s" maxtime="60s">

Thanks,
Anusha
Flag

RE: maxtime as variable in <transfer>
Answer
2/10/12 8:27 AM as a reply to Anusha Kannappan.
Hi,

The purpose is to limit a transfer call to a specific duration assigned as variable, for example application debitcard with attribute h323-credit-time.
How can i limit duration of transfer call in another way by use a variable?
Flag

RE: maxtime as variable in <transfer>
Answer
2/10/12 3:18 PM as a reply to Vadim Burcheganov.
Hi Vadim,

We also tested it in our lab and got the same error. I am not very sure that passing the maxtime attribute as variable would work. But anyway I will cross check with our internal teams over here and keep you posted once I receive any updates on the same.

Thanks,
Anusha
Flag

RE: maxtime as variable in <transfer>
Answer
2/10/12 5:38 PM as a reply to Anusha Kannappan.
Hi,

Thanks for cooperation. Probably, there is another attribute to limit duration by using of variable or other solution?
I'm looking forward for your update.
Flag

RE: maxtime as variable in <transfer>
Answer
2/13/12 4:02 AM as a reply to Vadim Burcheganov.
Hi Vadim,

Actually we had checked with our DE team and here is the reply we got

'The maxtime attribute list in transfer element is a constant of duration, not a variable. We don¿t support a variable of maxtime. '

Thanks,
Anusha
Flag

RE: maxtime as variable in <transfer>
Answer
2/13/12 5:01 AM as a reply to Anusha Kannappan.
Hi Anusha,

Probably, there is another attribute to limit duration by using of variable or other solution?
How can i solve my problem with limit duration of call in <transfer>?
Flag

RE: maxtime as variable in <transfer>
Answer
2/13/12 4:24 PM as a reply to Vadim Burcheganov.
Hi Vadim,

By using variable we will not be able to limit the duration. Directly by setting the value in the maxtime attribute you can use to limit the duration of the call in <transfer>

Thanks,
Anusha
Flag

RE: maxtime as variable in <transfer>
Answer
2/13/12 8:04 PM as a reply to Anusha Kannappan.
Hi Vadim,

Simple answer to your question is to use a dynamic web server to create your vXML - PHP, ASP, ColdFusion, whatever your preference.

Best of luck to you.

Travis
Flag

RE: maxtime as variable in <transfer>
Answer
2/14/12 5:18 AM as a reply to Travis May.
Hi,
I have understood. Thanks for cooperation.
Flag

RE: maxtime as variable in <transfer>
Answer
2/15/12 9:25 AM as a reply to Vadim Burcheganov.
Hi,
Please let me know if there's a plan to add attribute which allows the developer to specify an ECMAScript expression resolving to the duration of a transfer in the future, for example maxtimeexpr?
Flag

RE: maxtime as variable in <transfer>
Answer
2/15/12 6:57 AM as a reply to Vadim Burcheganov.
Hi Vadim,

I shall check with our DE team and get back to you at the earliest.

Thanks,
Anusha
Flag

RE: maxtime as variable in <transfer>
Answer
2/16/12 6:04 AM as a reply to Anusha Kannappan.
Hi Vadim,

We have got the confirmation from our DE team that currently there is no roadmap for VxML development.

Thanks,
Anusha
Flag

Collateral


No files available