user from outside call specific number in CME, then CME asks a password or pin, after user enter the password, he would be able to make a outbound call through CME. In this case, our employee can make a outbound call to international, and our company is getting charged not employee.
 
PIN should be 2784872 .
 
Below is the TCL script which i get from forum...
 
It keeps on asking for the PIN....
 
#------------------------------------------------------------------
#
# This tcl script prompts user for account number and then
# authenticates the account number. If authenticated, the call will
# be connected. If not authenticated, call will be closed.
#
# The PIN the users enters becomes the "username" and the password
# is set by the script and remains fixed (see "set pin 1234567" statement
# below).
#                     
proc init { } {
    global param
    set param(initialDigitTimeout) 10
    set param(interruptPrompt) true
    set param(abortKey) *
    set param(terminationKey) #
}
proc act_Setup { } {
    global ani
    global dnis
    global beep
    global ctr
   
    set ctr 0
    set beep 0
    set ani [infotag get leg_ani]
    set dnis [infotag get leg_dnis]
    leg setupack leg_incoming
    leg proceeding leg_incoming
    leg connect leg_incoming
    act_GetAccount
}
proc act_GetAccount { } {
    global param
    media play leg_incoming flash:enter_account.au
    set param(maxDigits) 20
    leg collectdigits leg_incoming param
}
proc act_GotAccount { } {
    global account
    global counter
    global ani
    global ctr
    global pin
    incr ctr
    set pin 1234567
    set status [infotag get evt_status]
    if {$status == "cd_005"} {
 set account [infotag get evt_dcdigits]
 #Do authorize
 aaa authorize $account $pin  $ani "" leg_incoming
    } elseif {$status == "cd_001"} {
   
        #timeout
 set number [infotag get evt_dcdigits]
 set numberLen [ string length $number ]
 if { $numberLen == 0 } {
            if { $ctr <= 3 } {
                act_GetAccount
                fsm setstate same_state
            } else {
                call close
            }
 } else {
    
     #Do authorize
     aaa authorize $account $pin $ani "" leg_incoming
        }
    } elseif {$status == "cd_002"} {
        #Aborted
        act_GetAccount
        fsm setstate same_state
    } elseif {($status == "cd_001") ||
              ($status == "cd_007") || ($status == "cd_006")} {
   
        #timeout/fail(disconnected)/invalid_no
        act_GetAccount
        fsm setstate same_state
    }
}
proc act_Authorized { } {
    global account
    global dnis
    set dnis [infotag get leg_dnis]
    set status [infotag get evt_status]
    if {$status == "ao_000"} {
        # Out going call is authorized
        puts "\t\t\t\n*** $account is authorized to call $dnis !!!\n"
        set callInfo(accountNum) $account
        leg setup $dnis callInfo leg_incoming
    } else {
        # Not authorized prompt ???
        puts "\t\t\t\n*** Sorry,$account not authorized to call $dnis !!!\n"
 call close
    } 
}
 
proc act_CallSetupDone { } {
    global beep
    set status [infotag get evt_status]
    if { $status != "ls_000"} {
 
 call close
    }
}

proc act_Cleanup { } {
    set evt_name [infotag get evt_event]
    call close
}
init
#----------------------------------
#   State Machine
#----------------------------------
set fsm(any_state,ev_disconnected)         "act_Cleanup       same_state"
 
set fsm(CALL_INIT,ev_setup_indication)     "act_Setup         GETACCOUNT"
 
set fsm(AUTHENTICATE,ev_authorize_done)    "act_Authorized    PLACECALL"
set fsm(GETACCOUNT,ev_collectdigits_done)  "act_GotAccount    AUTHENTICATE"
set fsm(CALLACTIVE,ev_disconnected)        "act_Cleanup    CALLDISCONNECT"
set fsm(CALLDISCONNECT,ev_disconnected)    "act_Cleanup    same_state"
set fsm(CALLDISCONNECT,ev_media_done)      "act_Cleanup    same_state"
set fsm(CALLDISCONNECT,ev_disconnect_done) "act_Cleanup    same_state"
set fsm(CALLDISCONNECT,ev_leg_timer)       "act_Cleanup    same_state"
fsm define fsm CALL_INIT
 
 
 
 

 
We dont use any server to authenticate. It should suppose to take username as PIN number.
 
Currently it is saying "enter your pin"
 
 
Kindly find the debug message:
 
debug voice ivr ?
% Unrecognized command
AAUSMELVG01#debug voice ivr
Warning: This command has been replaced by 'debug voip application '

Default vxml debugging is on
Default application debugging is on

AAUSMELVG01#
Aug 24 21:24:23.481: //-1//SERV:/AFW_Service_CCInterface: Received Event 26 for service Default modulehandle NULL
Aug 24 21:24:23.481: //-1//SERV:/AFW_Service_GetExecEnv: Script Name = Default
Aug 24 21:24:23.481: //-1//SERV:/AFW_Service_GetExecEnv: Using Cached ExecEnv
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_SetRoot: Execenv = 0x141D000C
Aug 24 21:24:23.481: //-1//AFW_:/AFW_M_TclModule_NewDup: 
Aug 24 21:24:23.481: //-1//AFW_:HN5F586D74:/AFW_M_TclModule_Free: 
Aug 24 21:24:23.481: //-1//AFW_:HN5F586D74:/AFW_M_Module_GetHandle: Module handle: TclModule_1FF1BE8_0_1599630708MOD[TclModule_1FF1BE8_0_1599630708]    ( )
Aug 24 21:24:23.481: //-1//AFW_:/AFW_Process_Lock: pProcess(0x189DBE18)=1
Aug 24 21:24:23.481: //-1//AFW_:LP:EE141D000C000:HN5F591DEC:/AFW_M_Object_SetExecEnv: ObjCount: 1, CmdPending 0
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_RestoreDataBackup: Restore DataArea from Script
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_RestoreDataBackup: Restore TokenTable from Script
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_Initiate: Execenv = 0x141D000C
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_SetCallCorID:
Aug 24 21:24:23.481:  CallCorID is h;gmha
e7;k>H
Aug 24 21:24:23.481: //-1//AFW_:/AFW_Leg_New: 
Aug 24 21:24:23.481: //1082//AFW_:/AFW_M_Leg_SetExecEnv: 
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_IncrPendingCmd:  PendingCmdCount: 1
Aug 24 21:24:23.481: //-1//AFW_:LP:EE141D000C000:LG1082:/AFW_M_Object_SetExecEnv: ObjCount: 2, CmdPending 1
Aug 24 21:24:23.481: //1082//AFW_:/AFW_Object_AddListener: adding Module TclModule as listener
Aug 24 21:24:23.481: //1082//AFW_:/AFW_M_Leg_GetHandle: Leg handle: LEG_1082
Aug 24 21:24:23.481: //-1//AFW_:EE141D000C000:/AFW_ExecEnv_AssignCall: Execenv = 0x141D000C, Leg = 1082, Peer_Tag = 20078
Aug 24 21:24:23.481: //1082//AFW_:/AFW_ExecEnv_SetCallCorID:
Aug 24 21:24:23.481:  CallCorID is h;gmha
e7;k>H
Aug 24 21:24:23.481: //-1//AFW_:/AFW_Event_New: Event ID: ev_any_event
Aug 24 21:24:23.481: //1082//AFW_:/AFW_Process_GetCcqEvent: Received
Aug 24 21:24:23.481: //-1//AFW_:/AFW_Process_GetCcqEvent:   Event[CC_EV_CALL_SETUP_IND(34)] {
Aug 24 21:24:23.481: //-1//AFW_:/AFW_Process_GetCcqEvent:     EXECENV[0x141D000C]
Aug 24 21:24:23.485: //-1//AFW_:/AFW_Process_GetCcqEvent:     LEG[1082][LEG_INIT(0)][Cause(0)]
Aug 24 21:24:23.485: //-1//AFW_:/AFW_Process_GetCcqEvent:   }
Aug 24 21:24:23.485: //1082//SSIN:/AFW_SS_MapEvent: 
Aug 24 21:24:23.485: //1082//AFW_:/AFW_Leg_GetTypeDetail: voice intf type = 26
Aug 24 21:24:23.485: //-1//SSIN:/AFW_SS_Telephony_MapEvent: 
Aug 24 21:24:23.485: //-1//AFW_:/AFW_Util_SaveRawMsg: 
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_UpdateStats: Updating stats for ID 271 type 0
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/incrementIncomingDialPeerCallStats: Incrementing call-stat to [-18] for dial-peer [20078]
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Object_WalkListeners: 
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_M_Object_ShowListeners: START
Aug 24 21:24:23.485: //-1//AFW_:/AFW_M_Object_ShowListeners:  
Aug 24 21:24:23.485: //1082//AFW_:/AFW_M_Module_GetHandle: Module handle: TclModule_1FF25F8_0_1599675884MOD[TclModule_1FF25F8_0_1599675884]  (
Aug 24 21:24:23.485: //-1//AFW_:/AFW_M_Object_ShowListeners:     LEG[1082][LEG_INCINIT(1)][Cause(0)]
Aug 24 21:24:23.485: //-1//AFW_:/AFW_M_Object_ShowListeners:   )
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_M_Object_ShowListeners: END
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Object_WalkListeners: Entering Module : TclModule
Aug 24 21:24:23.485: //1082//AFW_:/AFW_ExecEnv_SetModuleScope: TclModule_1FF25F8_0_1599675884 ---> TclModule_1FF25F8_0_1599675884
Aug 24 21:24:23.485: //1082//AFW_:/AFW_M_TclModule_Action: 
Aug 24 21:24:23.485: //1082//AFW_:/AFW_TclModule_DefaultEvHandling: 
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_CheckIncomingCallBlock: 
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_SettlementValidateCall: target=, tokenp=0x0
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_IncomingTranslate: 
Aug 24 21:24:23.485: //-1//AFW_:/AFW_Leg_IncomingTranslate: Tag(20078) calling[86133964] redirect[] called[]
Aug 24 21:24:23.485: //-1//AFW_:/C_ServiceSession_Event_Handler: 
Aug 24 21:24:23.485: //-1//AFW_:/AFW_Session_New: 
Aug 24 21:24:23.485: //-1//AFW_:/AFW_FSM_New: 
Aug 24 21:24:23.485: //-1//AFW_:HN5F591DF0:/AFW_M_Session_SetExecEnv: 
Aug 24 21:24:23.485: //-1//AFW_:LP:EE141D000C000:HN5F591DF0:/AFW_M_Object_SetExecEnv: ObjCount: 3, CmdPending 1
Aug 24 21:24:23.485: //1082//AFW_:/AFW_Object_AddListener: adding Module TclModule as listener
Aug 24 21:24:23.485: //1082//AFW_:/AFW_M_Module_GetHandle: Module handle: Session_135085E0_0_1599675888
Aug 24 21:24:23.485: //1082//AFW_:/C_PackageSession_NewCall: Session module listened by TclModule_1FF25F8_0_1599675884
Aug 24 21:24:23.485: //1082//AFW_:/AFW_ExecEnv_SetModuleScope: TclModule_1FF25F8_0_1599675884 ---> Session_135085E0_0_1599675888
Aug 24 21:24:23.485: //1082//AFW_:/AFW_FSM_Drive: ACTION BEGIN: ------(S_OPEN[1],ev_setup_indication[34])---[C_Action]------
Aug 24 21:24:23.485: //1082//AFW_:/Open_SetupIndication: Calling #(86133964), Calling Name (), Called #(), peer_tag(20078)
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Object_AddListener: adding Module Session as listener
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_GetTypeDetail: voice intf type = 26
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_GenerateTone:  ccTone 8 cptone 4
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_GetCodec: 
Aug 24 21:24:23.485: //1082/E8BB9EE78A87/AFW_:/AFW_Leg_GetCodec: Telephony leg. Default codec is assumed
Aug 24 21:24:23.485: //1082//Digi:/C_DigitCollect_Start: Leg=1082, Dialplan=True, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=True, Abortkey=

Aug 24 23:18:54.215: //-1//SERV:/AFW_Service_CCInterface: Received Event 26 for service Default modulehandle NULL
Aug 24 23:18:54.215: //-1//SERV:/AFW_Service_GetExecEnv: Script Name = Default
Aug 24 23:18:54.215: //-1//SERV:/AFW_Service_GetExecEnv: Using Cached ExecEnv
Aug 24 23:18:54.215: //-1//AFW_:EE01F95630000:/AFW_ExecEnv_SetRoot: Execenv = 0x1F95630
Aug 24 23:18:54.215: //-1//AFW_:/AFW_M_TclModule_NewDup:
Aug 24 23:18:54.215: //-1//AFW_:HN0032CB70:/AFW_M_TclModule_Free:
Aug 24 23:18:54.215: //-1//AFW_:HN0032CB70:/AFW_M_Module_GetHandle: Module handle: TclModule_1F97BFC_0_3328880MOD[TclModule_1F97BFC_0_3328880] ( )
Aug 24 23:18:54.215: //-1//AFW_:/AFW_Process_Lock: pProcess(0x188E6B4C)=1
Aug 24 23:18:54.215: //-1//AFW_:LP:EE01F95630000:HN0035238C:/AFW_M_Object_SetExecEnv: ObjCount: 1, CmdPending 0
Aug 24 23:18:54.215: //-1//AFW_:EE01F95630000:/AFW_ExecEnv_RestoreDataBackup: Restore DataArea from Script
Aug 24 23:18:54.215: //-1//AFW_:EE01F95630000:/AFW_ExecEnv_RestoreDataBackup: Restore TokenTable from Script
Aug 24 23:18:54.215: //-1//AFW_:EE01F95630000:/AFW_ExecEnv_Initiate: Execenv = 0x1F95630
Aug 24 23:18:54.215: //-1//AFW_:EE01F95630000:/AFW_ExecEnv_SetCallCorID:
Aug 24 23:18:54.215: CallCorID is h
Qhmxa



Digit Collect Not Enabled.....


I am giving Account number, but it keeps on saying Enter your PIN.....

AAUSMELVG01# debug voip application digitcollect
voip application digit collect debugging is on
AAUSMELVG01#
Aug 24 23:29:01.187: //41//Digi:/C_DigitCollect_Start: Leg=41, Dialplan=True, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=True, Abortkey=, Terminationkey=#, Numpatterns=0, Maxdigits=0, Mindigits=0, Interruptprompt=False, InterTimeout=-1000, Initialtimeout=-1000, Mask=0 Hotword=0
Aug 24 23:29:01.187: //-1//Digi:/AFW_DigitCollect_New:
Aug 24 23:29:01.187: //-1//Digi:HN003E6688:/AFW_DigitCollect_New: DialPlan=TRUE AbortKey= TermKey=# NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=FALSE minDigits=0 maxDigits=0 DialPlanTerm=FALSE hotword=0
Aug 24 23:29:01.187: //41/51CB00AF8032/Digi:/DigitCollectStart_UpdateStats:
Aug 24 23:29:01.187: //41//Digi:/DigitCollect_MLPPTuning:
Aug 24 23:29:01.187: //41//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Aug 24 23:29:01.187: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:01.187: //41//Digi:/act_DCRunning_RDone: id=41 Enable succeeded.enable=0 matchDialplan=1 numPatterns=0matchDialplanTerm=0
Aug 24 23:29:02.111: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.111: //41//Digi:/act_DCRunning_Digit: : pLeg 41 Digit 3 Tone Mode 0
Aug 24 23:29:02.111: //41//Digi:/DigitCollect_TreatDigit:
Aug 24 23:29:02.111: //41//Digi:/DigitCollect_DialPlanMatch: pattern offset=0, digits=3
Aug 24 23:29:02.111: //41//Digi:/DigitCollect_DialPlanMatch: src carrier id:, tgt carrier id:
Aug 24 23:29:02.111: //41//Digi:/DigitCollect_DialPlanMatch: Match single infotype
Aug 24 23:29:02.311: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.311: //41//Digi:/act_DCRunning_Digit: : pLeg 41 Digit 9 Tone Mode 0
Aug 24 23:29:02.311: //41//Digi:/DigitCollect_TreatDigit:
Aug 24 23:29:02.311: //41//Digi:/DigitCollect_DialPlanMatch: pattern offset=0, digits=39
Aug 24 23:29:02.311: //41//Digi:/DigitCollect_DialPlanMatch: src carrier id:, tgt carrier id:
Aug 24 23:29:02.311: //41//Digi:/DigitCollect_DialPlanMatch: Match single infotype
Aug 24 23:29:02.511: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.511: //41//Digi:/act_DCRunning_Digit: : pLeg 41 Digit 0 Tone Mode 0
Aug 24 23:29:02.511: //41//Digi:/DigitCollect_TreatDigit:
Aug 24 23:29:02.511: //41//Digi:/DigitCollect_DialPlanMatch: pattern offset=0, digits=390
Aug 24 23:29:02.511: //41//Digi:/DigitCollect_DialPlanMatch: src carrier id:, tgt carrier id:
Aug 24 23:29:02.511: //41//Digi:/DigitCollect_DialPlanMatch: Match single infotype
Aug 24 23:29:02.711: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.711: //41//Digi:/act_DCRunning_Digit: : pLeg 41 Digit 2 Tone Mode 0
Aug 24 23:29:02.711: //41//Digi:/DigitCollect_TreatDigit:
Aug 24 23:29:02.711: //41//Digi:/DigitCollect_DialPlanMatch: pattern offset=0, digits=3902
Aug 24 23:29:02.711: //41//Digi:/DigitCollect_DialPlanMatch: src carrier id:, tgt carrier id:
Aug 24 23:29:02.711: //41//Digi:/DigitCollect_DialPlanMatch: Match single infotype
Aug 24 23:29:02.711: //41//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.711: //41//Digi:/act_DCRunning_RDone: id=41 Reporting disabled.
Aug 24 23:29:02.711: //-1//Digi:/DigitCollect_Complete: DC_MATCHED_DIALPLAN. Digits=3902
Aug 24 23:29:02.711: //41//Digi:/AFW_M_DigitCollect_EventPreProcess:
Aug 24 23:29:02.711: //41//Digi:/DigitCollectEnd_UpdateStats:
Aug 24 23:29:02.715: //43//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming param
Aug 24 23:29:02.715: //43//Digi:/C_DigitCollect_Start: Leg=43, Dialplan=False, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=#, Numpatterns=0, Maxdigits=20, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=10000, Mask=0 Hotword=0
Aug 24 23:29:02.715: //-1//Digi:/AFW_DigitCollect_New:
Aug 24 23:29:02.715: //-1//Digi:HN003E6C80:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=# NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=20 DialPlanTerm=FALSE hotword=0
Aug 24 23:29:02.715: //43/51CB00AF8032/Digi:/DigitCollectStart_UpdateStats:
Aug 24 23:29:02.715: //43//Digi:/DigitCollect_MLPPTuning:
Aug 24 23:29:02.715: //43//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Aug 24 23:29:02.715: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:02.715: //43//Digi:/act_DCRunning_RDone: id=43 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=0
Aug 24 23:29:12.715: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:15.723: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:15.723: //43//Digi:/act_DCRunning_Digit: : pLeg 43 Digit T Tone Mode -1
Aug 24 23:29:15.723: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:15.723: //43//Digi:/act_DCRunning_RDone: id=43 Reporting disabled.
Aug 24 23:29:15.723: //-1//Digi:/DigitCollect_Complete: DC_TIMEOUT. Digits=
Aug 24 23:29:15.723: //43//Digi:/AFW_M_DigitCollect_EventPreProcess:
Aug 24 23:29:15.723: //43//Digi:/DigitCollectEnd_UpdateStats:
Aug 24 23:29:15.723: //43//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming param
Aug 24 23:29:15.723: //43//Digi:/C_DigitCollect_Start: Leg=43, Dialplan=False, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=#, Numpatterns=0, Maxdigits=20, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=10000, Mask=0 Hotword=0
Aug 24 23:29:15.723: //-1//Digi:/AFW_DigitCollect_New:
Aug 24 23:29:15.723: //-1//Digi:HN003E9F50:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=# NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=20 DialPlanTerm=FALSE hotword=0
Aug 24 23:29:15.723: //43/51CB00AF8032/Digi:/DigitCollectStart_UpdateStats:
Aug 24 23:29:15.723: //43//Digi:/DigitCollect_MLPPTuning:
Aug 24 23:29:15.723: //43//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Aug 24 23:29:15.723: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:15.723: //43//Digi:/act_DCRunning_RDone: id=43 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=0
Aug 24 23:29:17.331: //43//Digi:/AFW_M_DigitCollect_Action:
Aug 24 23:29:17.331: //43//Digi:/act_DCRunning_Disconnected:
Aug 24 23:29:17.331: //-1//Digi:/DigitCollect_Complete: DC_DISCONNECTED. Digits=
Aug 24 23:29:17.331: //43//Digi:/AFW_M_DigitCollect_EventPreProcess:
Aug 24 23:29:17.331: //43//Digi:/DigitCollectEnd_UpdateStats:

Posted a script that can configured a password within service no need for RADIUS


http://developer.cisco.com/documents/148607/0/password2call.tcl.zip?redirect=http%3a%2f%2fdeveloper.cisco.com%2fweb%2fvgapi%2fdocs%3fp_p_id%3ddoc_library_summary_portlet_WAR_doclibrarysummaryportlet_INSTANCE_tpiU%26p_p_lifecycle%3d0%26p_p_state%3dnormal%26p_p_mode%3dview%26p_p_col_id%3dcolumn-1%26p_p_col_count%3d2