TCL script to disconnect call after 10 secs http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=4179827 2013-05-21T09:47:41Z 2013-05-21T09:47:41Z MIGUEL MARTINEZ http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=11679367 2013-02-07T16:58:08Z 2013-02-07T16:58:08Z

Brian, can you send me the script, please.   melvin.silva@hotmail.com

MIGUEL MARTINEZ 2013-02-07T16:58:08Z Hassan Alsafi http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6165096 2012-07-24T11:45:48Z 2012-07-24T11:45:48Z

Dear Brian ,, Please can you send to me your script file . for testing Email hassan_alsaffi@hotmail.com . Best Regards ,

Hassan Alsafi 2012-07-24T11:45:48Z Juan Manuel Valladares http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=5865147 2012-06-13T23:52:18Z 2012-06-13T23:52:18Z

Hey Brian, can you send me your script too please, thank you so much for your help... my email is fallenangel.jm@gmail.com

Juan Manuel Valladares 2012-06-13T23:52:18Z Brian Meade http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4325289 2011-08-05T20:25:55Z 2011-08-05T20:25:55Z

Brian, Could you send me your script? I'm looking to do the same thing and don't have any script experience at all. Thanks!

Brian Meade 2011-08-05T20:25:55Z Brian McCormick http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4190358 2011-07-08T22:37:54Z 2011-07-08T22:37:54Z

Some basic stuff missing from that script. I've resolved my issue. Thanks for the help Brian

Brian McCormick 2011-07-08T22:37:54Z Yaw-Ming Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4187707 2011-07-08T18:53:06Z 2011-07-08T18:53:06Z

Your script doesn't connect incoming leg Please go to http://developer.cisco.com/web/vgapi/docs download "How to test TCL IVR Scripts in Cisco Voice..." You should find an sample script in it. Take a look how to do call setup. Thanks !

Yaw-Ming Chen 2011-07-08T18:53:06Z Brian McCormick http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4186480 2011-07-08T22:38:21Z 2011-07-08T09:17:24Z

Hi, I've attached the script. I think my issue is finding the event that will trigger the procedure that will start the timer. I'm attempting to run this script on the outgoing dial peer.   I initially started the timer in the init{} procedure .. that's why I was getting the initialisation error ... I'm not getting this anymore. Thanks, Brian

Brian McCormick 2011-07-08T09:17:24Z Raghavendra Gutty Veeranagappa http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4184193 2011-07-08T06:48:37Z 2011-07-08T06:48:37Z

Hi Brian, you don't need to intialize the timer, The timer start command starts a timer for a specified number of seconds When the timer expires, the script receives an ev_named_timer event. please send us your script and debugs by enabling below debugs to find the issue. debug voip app Thanks, Raghavendra

Raghavendra Gutty Veeranagappa 2011-07-08T06:48:37Z Brian McCormick http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4184358 2011-07-07T15:25:02Z 2011-07-07T15:25:02Z

Hi, That's helpful. I'm almost there, but I'm having trouble initialising the timer..   At this line ...     #create a timer for 5 secs     timer start named_timer 5 timer_1     I get the following error: //-1//TCL :EE29697584000:/tcl_TimerStartObjCmd: timer start named_timer 5 timer_1 %SYS-3-MGDTIMER: Uninitialized timer, init with uninitialized master, timer = 38. -Process= "script background loader",   How do I initialse  named_timer?   Thanks, Brian  

Brian McCormick 2011-07-07T15:25:02Z Anusha Kannappan http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4180010 2011-07-07T11:43:32Z 2011-07-07T11:43:32Z

Hi, You can set timer when the call is active and once the timer expires call a procedure that would destroy the connection and disconnect the leg using the following command connection destroy {connectionID | info-tag} leg disconnect {legID | info-tag} [-c cause_code] [-g <gtd_handle>] [-i <iec>] Please go through the TCL IVR API programming guide from the following link to gain the basic knowledge for developing the scripts http://www.cisco.com/en/US/docs/ios/voice/tcl/developer/guide/tclivrv2.html At the end of the document you could see some sample scripts, make use of the procedures and FSM states as per your requirement and create a script. Thanks, Anusha

Anusha Kannappan 2011-07-07T11:43:32Z Brian McCormick http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=4179826 2011-07-07T09:52:16Z 2011-07-07T09:52:16Z

Hi, I'm looking to create a simple TCL script which will automatically disconnected an outgoing call after 10secs. Can anybody point me in the right direction for this? Thanks, Brian  

Brian McCormick 2011-07-07T09:52:16Z