test outbound call to pstn http://developer.cisco.com/c/message_boards/find_thread?p_l_id=&threadId=6401355 2013-05-23T20:09:11Z 2013-05-23T20:09:11Z Yaw-Ming Chen http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6418152 2012-09-04T19:25:05Z 2012-09-04T19:25:05Z

If you know Cisco EEM http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_home.html You can use EEM watch dog trigger something like : event manager environment ivr_cmd1 call application voice load pg event manager environment ivr_cmd2 call application session start test pg to execute your outbound script within your Tcl script use "log" command to generate syslog The log command originates a syslog message. Syntax log -s <CRIT | ERR | WARN | INFO> <message text> Arguments • -s <CRIT | ERR | WARN | INFO>—The severity of the message. – CRIT—Critical – ERR—Error message (default) – WARN—Warning message – INFO—Informational message In fact EEM can catch syslog trigger as well, over there you can do addition things I know someone did this before and it's working fine for them

Yaw-Ming Chen 2012-09-04T19:25:05Z Kevin Frazer http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6418759 2012-09-04T18:21:09Z 2012-09-04T18:21:09Z

Paolo, I'll try to reach you with the contact info provided.

Kevin Frazer 2012-09-04T18:21:09Z Kevin Frazer http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6418753 2012-09-04T18:16:32Z 2012-09-04T18:16:32Z

Hi Raghavendra, I will check the documentation.

Kevin Frazer 2012-09-04T18:16:32Z Paolo Bevilacqua http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6402457 2012-08-31T08:39:34Z 2012-08-31T08:39:34Z

Yes, it is usually possble to do thing like that, you can contact me at info@ciscoscripts.com to have script written for you.

Paolo Bevilacqua 2012-08-31T08:39:34Z Raghavendra Gutty Veeranagappa http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6402444 2012-08-31T08:34:11Z 2012-08-31T08:34:11Z

Hi Kevin, we don't have any such tcl scripts, you can make use of timer command to make a call after timer expired for certain time and then write the call staus to some file , but i am not sure about reporting via snmp or syslog and not aware of any such tools. for more information you can refer TCL-IVR programming guide in documentation section. Thanks, Raghavendra

Raghavendra Gutty Veeranagappa 2012-08-31T08:34:11Z Kevin Frazer http://developer.cisco.com/c/message_boards/find_message?p_l_id=&messageId=6401354 2012-08-30T21:08:30Z 2012-08-30T21:08:30Z

Hi!   Are there any tcl scripts that can make an outbound call to a pstn (by seizing an FXO port or similar?) number based on time of day? ideally, it would try the call every 2 to 4 hours, then produce a success/failure result report via snmp or syslog? if this is not possible, is there any third party tool that can accomplish?

Kevin Frazer 2012-08-30T21:08:30Z