RE: Get Valid joinMeetingURL Response Without Email?

RE: Parse Error

2013-05-22T18:26:29Z

Yes, there are & in my request, but they are HTML encoded, and this used to work just fine. Hopefully this will get fixed soon, as our integration is used by A LOT of users. Thank you for the reply.

RE: Parse Error

2013-05-22T18:10:35Z

Hi T.J., By any chance does your XML request contain any "&" or "%" symbols? If your request includes either of these AND you are using [b]application/x-www-form-urlencoded[/b] as your HTTP header content-type, you could run into this error. Our Engineering team is aware of this issue and is working on a fix. Unfortunately there is no ETA at this time for the fix. In the meanwhile, if possible you can either (1) remove any instance of these characters or (2) change your request header content-type to [b]application/xml [/b]to correct this issue. Regards, Jayde Moors WebEx API Developer Services

Parse Error

2013-05-22T17:55:38Z

I have recently begun to receive the following error from the CreateMeetingAttendee call: [i][b]"validation: Parsing error: Content is not allowed in prolog. Line: 1 Column: 1"[/b][/i] Has something changed on the WebEx side that would cause this? Thanks

RE: JoinTeleconfBeforeHost

2013-05-20T07:02:28Z

Thank you Nathan

RE: Type of WebEx account needed for API access?

2013-05-17T19:40:46Z

There is no API solution for meetings.webex.com. For customers that have an enterprise account, usually in the form of companyname.webex.com, API can be enabled for use with third party integrations. For your development purposes and product demonstration purposes, you would probably want to get your own enterprise account with Gold Developer Program access to allow you to develop and test your integration on a dedicated site with site admin access. Customers who wish to use your integration would contact their WebEx account manager to enable APIs for use with your integration.

RE: Type of WebEx account needed for API access?

2013-05-17T19:19:48Z

Does anyone have any more information on the "approved WebEx partner integration" mentioned in the post I linked to above? I filled out a form to become a "Partner", and as near as I can tell, it changes nothing... I didn't see where it gave me any new access to new information I didn't already have by making an account as a Developer to access these forums. Is there a solution, to allow me to create a portal that is integrated with WebEx, and allows our users to bring their own, pre-existing WebEx accounts to it, or not? We're not looking to become WebEx resellers, or to sell sub-accounts of our Enterprise account.

RE: JoinTeleconfBeforeHost

2013-05-17T16:53:46Z

Hello, I do not believe the mobile application is capable of being the first attendee to join the session. The URL API is not capable of being the first to join the session. You should be able to join from the WebEx site from a computer once the openTime time has been reached. Once one attendee has joined, you will be able to join from the mobile client or URL API join link. As for your request, it looks good except for a couple problems. 750 is not a valid openTime, it can only be 5, 10, or 15 minutes (in seconds). In order to use extTelephonyDescription, the telephonySupport should be OTHER.

RE: JoinTeleconfBeforeHost

2013-05-17T06:19:09Z

Hello Nathan, this our XML. The WebEx URL ( for Meeting Center) referring to the company at which I work so I can't post it ... Meeting ... ... ... ... true true true false false true true true true true true true true true true 05/17/2013 08:05:00 750 true 60 23 false CALLIN Call 1-800-555-1234, Passcode 98765 The meeting is created successufully , but when I receive the email from the webEx system and click on JoinMeetingURL from my IPAD I have the message "The meeting has not started yet" Thanks Oronzo

RE: JoinTeleconfBeforeHost

2013-05-16T17:57:06Z

I would need to see your XML request and the WebEx URL you are using. Setting open time typically works to allow attendees to join before host but there could be other site settings preventing this as an option.

RE: JoinTeleconfBeforeHost

2013-05-16T17:47:07Z

Hello Nathan I have set opentime to 900 but attendee is not allowed to access to meeting.

RE: JoinTeleconfBeforeHost

2013-05-16T16:40:17Z

Hello, That element controls the audio portion of the conference. Usually, attendees must wait for the host to join before the audio starts. You will need to specify the openTime to allow attendees to join the web conference before host.

RE: GetSite : Response Validation Error

2013-05-16T16:37:37Z

On the code samples page of this portal, there is a link on the right side of the page to an XML debug html file that allows you to submit a raw XML request and see the response. The response you are getting appears to be an issue with how your code handles the character encoding or some other code issue.

JoinTeleconfBeforeHost

2013-05-16T14:50:13Z

Hello we create meeting using webEx API . We want that the attendee could access to meeting before host. with [b]JoinTeleconfBeforeHost= true[/b] but the attendee cannot access before HOST that could start the meeting. Could give support about that ? Regards Oronzo Lezzi

RE: GetSite : Response Validation Error

2013-05-16T13:22:33Z

Hi Nathan, Thanks! for the Reply I did try as suggested to access the GetSitr API, but i am getting response in Junk Values like below "?c???????????????????????????????????????????????????????????????????????????????????" I am able to succesfully get response from API GetUser, CreateMeeting, GethosturlMeeting and LstsummaryMeeting API from my C++ aplication. I am not able to get API GetSite and lstTimeZone working. I am currently using "xml_api_5 9.pdf" document as my reference, please update me if this is not the latest document. Thanks & Regards, Prabodh

RE: Getting error in Scheduling Meeting

2013-05-16T07:06:25Z

Hi Nathan, Thanks for your reply, my above issue is resolved. But now i am getting another error. The user or site does not support this meeting type please suggest for above error..

RE: Is their any way to Validate XML Service URL ?

2013-05-15T17:17:17Z

Hello, You can establish a connection to the XML service URL wihtout a request to check for HTTP 200 success. If you are also checking authentication details, you can use a request like GetAPIVersion or GetlogInurlUser.

RE: GetSite : Response Validation Error

2013-05-15T17:12:38Z

[color=#525252]Hello,[/color] [color=#525252] [/color] [color=#525252] The error suggests that you are setting returnSettings as a child of body when it should be a child of bodyContent. I was able to test this request with returnSettings successfully. The reference guide is fairly old and will be updated, spelling errors, including returnSetting, should be addressed before a new guide is released.[/color] [color=#525252] [/color] [color=#525252][/color] [color=#525252][/color] [color=#525252]

[/color] [color=#525252] [/color] [color=#525252] removed[/color] [color=#525252] removed[/color] [color=#525252] removed[/color] [color=#525252] removed[/color] [color=#525252] [/color] [color=#525252]

[/color] [color=#525252] [/color] [color=#525252] [/color] [color=#525252] [/color] [color=#525252] TRUE[/color] [color=#525252] [/color] [color=#525252] [/color] [color=#525252] [/color] [color=#525252][/color]

Is their any way to Validate XML Service URL ?

2013-05-15T13:36:01Z

Is their any way to Validate XML Service URL ? any API ? Thanks & Regards, Prabodh

GetSite : Response Validation Error

2013-05-15T10:00:13Z

Hi, When i make a GetSite request

hostid hostpassword 0000 9999 johnsmith@xyz.com

true i always get a reponse "validation: unable to find FieldDescriptor for 'returnSettings' in ClassDescriptor of body" FAILUREvalidation: unable to find FieldDescriptor for 'returnSettings' in ClassDescriptor of bodyPRIMARY999999 Please can anyone help on this ? Plus I see mismatch in the request string tagname for the element ID "returnSettings", please correct on this. Thanks & Regards, Prabodh

RE: Get Valid joinMeetingURL Response Without Email?

2013-05-14T16:36:49Z

OK, I will continue to troubleshoot with this issue based on your feedback - Thanks for pointing me in the right direction.