A Command Line Interface designed for retrieving interfaces from Cisco ACI
Clone the repo
git clone https://github.com/insobi/aci-interface-cli.git
Go to your project folder
cd aci-interface-cli
Install dependencies
pip install -r requirements.txt
Set environment variables
export ACI_USERNAME="admin" export ACI_PASSWORD="C1sco12345" export ACI_URL="https://198.18.133.200"
How to use
Usage: aci-interface-cli.py [OPTIONS] COMMAND [ARGS]...
ACI Interface CLI
Options:
--help Show this message and exit.
Commands:
phys Shows physical interfaces
phys-operst Shows operational status of physical interfaces
vpc Shows physical interfaces
How to use phys command
Usage: aci-interface-cli.py phys [OPTIONS]
Shows physical interfaces
Options:
--state [up|down] Filter by adminSt of interface
--csv Downloads as csv file
--descr-exists Including only interfaces having description
--raw Shows raw data as json format
--help Show this message and exit.
Check out Physical Interface as table
$ python aci-interface-cli.py phys +-----+------+-----------+---------+------+-------+-------------------+ | pod | node | interface | adminSt | mtu | mode | descr | +-----+------+-----------+---------+------+-------+-------------------+ | 1 | 1201 | eth1/1 | up | 9000 | trunk | hello | | 1 | 1201 | eth1/2 | up | 9000 | trunk | world | | 1 | 1201 | eth1/3 | up | 9000 | trunk | | | 1 | 1201 | eth1/4 | up | 9000 | trunk | | ... +-----+------+-----------+---------+------+-------+-------------------+
Check out only physical Interface which have description
$ python aci-interface-cli.py phys --descr-exists +-----+------+-----------+---------+------+-------+-------------------+ | pod | node | interface | adminSt | mtu | mode | descr | +-----+------+-----------+---------+------+-------+-------------------+ | 1 | 1201 | eth1/1 | up | 9000 | trunk | hello | | 1 | 1201 | eth1/2 | up | 9000 | trunk | world | +-----+------+-----------+---------+------+-------+-------------------+
Check out physical Interfaces which are operational down
$ python aci-interface-cli.py phys-operst --state down +-----+------+-----------+--------+------------+ | pod | node | interface | operSt | operStQual | +-----+------+-----------+--------+------------+ | 1 | 101 | eth1/8 | down | admin-down | | 1 | 101 | eth1/9 | down | admin-down | +-----+------+-----------+--------+------------+
Download a csv file for list of Physical Interface
$ python aci-interface-cli.py phys --csv interface_phys.csv file was created.
Check out interface list filtered by json query with --raw option and jq
$ python aci-interface-cli.py phys --raw | jq '.imdata[].l1PhysIf.attributes | select(.mode|contains("trunk"))'
{
"adminSt": "up",
"autoNeg": "on",
"breakT": "nonbroken",
"bw": "0",
"childAction": "",
"delay": "1",
"descr": "",
"dfeDelayMs": "0",
"dn": "topology/pod-2/node-2201/sys/phys-[eth1/32]",
"dot1qEtherType": "0x8100",
"emiRetrain": "disable",
"enablePoap": "no",
"ethpmCfgFailedBmp": "",
"ethpmCfgFailedTs": "00:00:00:00.000",
"ethpmCfgState": "0",
"fcotChannelNumber": "Channel32",
"fecMode": "inherit",
"id": "eth1/32",
"inhBw": "unspecified",
"isReflectiveRelayCfgSupported": "Supported",
"layer": "Layer2",
"lcOwn": "local",
"linkDebounce": "100",
"linkFlapErrorMax": "30",
"linkFlapErrorSeconds": "420",
"linkLog": "default",
"mdix": "auto",
"medium": "broadcast",
"modTs": "2023-10-21T19:56:51.655+00:00",
"mode": "trunk",
"monPolDn": "uni/infra/moninfra-default",
"mtu": "9000",
"name": "",
"pathSDescr": "",
"portPhyMediaType": "auto",
"portT": "leaf",
"prioFlowCtrl": "auto",
"reflectiveRelayEn": "off",
"routerMac": "not-applicable",
"snmpTrapSt": "enable",
"spanMode": "not-a-span-dest",
"speed": "inherit",
"status": "",
"switchingSt": "disabled",
"trunkLog": "default",
"usage": "discovery"
},
...
Owner
Contributors
Categories
Products
Application Centric Infrastructure (ACI)Programming Languages
PythonLicense
Code Exchange Community
Get help, share code, and collaborate with other developers in the Code Exchange community.View Community