Network Programmability

Do you often ask yourself why we keep configuring our network devices in the same way we have been doing it for the last 30 years? Isn't it strange that we still have to log into each individual box and use command-line instructions to perform any changes? Do you wonder if there might be a more optimal way of configuring your infrastructure, instead of CLI? Does this way of working make you feel like any simple change in your network is complex to implement?

You are not alone.

There are definitely alternative and innovative ways of programming your network infrastructure. Yes, when you configure your network devices to adopt a certain behaviour, or implement a new available feature, you are programming them. So one of the first things we should be looking for is more optimal ways of programming our infrastructure.

The challenge of Dynamic applications vs Static network

Furthermore, as the network exists to provide connectivity for applications, we should take a look at how these are evolving. Agile microservices-based cloud-native development, DevOps automation with CICD pipelines, and automated unit testing, enable really dynamic application development for quick time-to-market requirements. Let's not forget that software is one of the most important assets to differentiate modern enterprises from their competition. Being able to quickly implement new features, deploy new locations, or fix issues, is absolutely key to their success.

For the last years, servers have been virtualized with Virtual Machines that can be automatically deployed in minutes. These days the trend is going to container-based microservices, that are deployed insanely fast. These are short-lived entities that may be deployed dynamically across hybrid cloud environments, interacting among them to provide the desired service with virtually unlimited scalability, and adapting to any possible issues in the underlying infrastructure via declarative statements.

In comparison, network infrastructure is much more static. In order to accommodate requirements from application developers it needs to be faster, more flexible and cost-optimized. Today network configuration is often a completely manual process that makes any desired change across the network complex and slow. The more elements these changes include (eg. firewalls, load-balancers...) the more difficult it gets to make them quick, reliable and adaptable. This situation often leads to bare minimum configurations in the network, that allows for a faster deployment (eg. no security ACLs, no QoS config, or trunking every VLAN in an interface) but usually leading to much bigger concerns.

Infrastructure is full of products designed to be used by... humans. It may not always seem that way, but human operators are the target users for CLI and web interfaces. This means that when you need to get something done via these interfaces, you (or some other human) has to do the work.

You won't have to think back too far to remember the last time you needed to complete some bulk-task on a computer. The task probably involved a lot of clicking, typing, copying-and-pasting, or other mind-numbing repetitions. These human interfaces (and the paradigm of having humans do the work) are to blame for the bulk-work that we sometimes have to do to complete a task.

Our brain has a great capacity, but clearly human input/output interfaces with a computer (typing and reading) are not very fast. Our thoughts neck down to this tiny straw, which output-wise is like poking things with your meat sticks, or using words (speaking or tapping things with fingers). For example, machine typing usually happens at a 20th of the speed you are thinking. And I am talking ten-finger typing, let's not even go into two-thumb typing...
So while Elon Musk finishes his BMI (Brain Machine Interface), aka Wizard Hat, we will have to explore alternative options that optimize how we configure our networks.

What is Programmability

Computers are great at bulk-work, but if you want your computer to talk to your infrastructure and do something, you will need a machine-to-machine interface or API (Application Programming Interface): an interface designed for software pieces to interact with each other.

By 2020, only 40% of network operations teams will use the command line interface (CLI) as their primary interface, which is a decrease from 75% in 2Q18. (Gartner, 2018 Strategic Roadmap for Networking)

Network Programmability uses a set of software tools to deploy, manage and troubleshoot network devices and controllers via APIs, gathering data and driving configurations to enhance and secure application delivery. This software can on-box or off-box, and work on-demand or event-driven.

We can ask an API to:

  • Take some action
  • Provide us with some piece of information
  • Store some piece of information

We use these machine-to-machine APIs to make simple requests to our infrastructure, which in aggregate, enable us to complete powerful tasks.

For example, you might use APIs to make simple requests like...

  • Get the status for interface X
  • Get the last-change time for interface X
  • Shutdown interface X
  • Set the description of interface X to "Interface disabled per Policy"

... and that way complete a powerful task like: "Disable all ports that have been inactive for 30 days."

Sure, you could do this manually, but wouldn't it be better to codify the process (write it once) and then let your computer run this task whenever you need it done?

Besides this, information included in API responses should be formed by data structures that can be programmatically readable by machines (and ideally also by humans). Classic CLI responses are human-readable text, but very difficult to be interpreted by a machine, that needs to be parsed with great difficulty before being able to leverage the included information.

If you need information from your infrastructure, ask for it. Using a machine-to-machine API means your request will complete, your data retrieved in a programmatic data structure, or you will receive notification to the contrary. All done in a way that enables you to automate the interaction. APIs make it easy to send requests to your infrastructure, but what makes it easy to codify the processes?

Why Coding

Coding is the process of writing down instructions, in a language a computer can understand, to complete a specific task.

Let's consider a simple codified process that we are asking a computer to follow:

  • For each switch in my network...
    • For each interface in the switch...
      • If the interface is down, and hasn't changed states in more than thirty days, then:
        • Shutdown the interface
        • Update the interface description to mention why it's been shut down
for switch in my_network:
    for interface in switch:
        if interface.is_down() and interface.last_change() > thirty_days:
            interface.shutdown()
            interface.set_description("Interface disabled per Policy")

This is essentially the process that you, as a human, would go through to complete the same task. By taking the time to codify it (write it down in a machine interpretable language), you can now ask the computer to do the task whenever you need it done. You, the human, are providing the intelligence (what needs to be done and how it should be done), while letting the computer do the boring and repetitious work (which is what it does best).

While the code sample above is a snippet of a larger script, and is calling other functions (like interface.last_change() and interface.shutdown()), implementing the utility functions is straightforward and the code shown is actual valid Python code that would complete the task. The core logic is that simple.

What has changed?

APIs and programming languages aren't new, so, why the recent hype?

Well... they have matured!

Modern Programming Languages & Tools

Modern programming languages like JavaScript, Python, Go, Swift, and others are less cumbersome and more flexible than their predecessors. It used to be that you had to write 10,000 lines of C++ code to do anything useful, but with these modern languages (and packages and libraries available from their developer communities) you can do powerful things in less than 300 lines of code. Which is probably shorter, or on par with, most Cisco IOS configurations that you have worked with.

These languages, when combined with other modern developer tools (eg. Git repositories, Package management systems, Virtual environments, Integrated Development Environments) equip you with powerful development tools that enable you to automate your tasks and processes and begin creating your own set of powerful tools and workflows.

While these tools are great, and are now bringing rich value to the systems engineering discipline, we are also benefiting from another maturing area of the software development industry.

Online Communities

In the past, when you set out to create some script or program, you often had to start from scratch, working with low-level standard libraries included with your programming language and toolset of choice. This created a high barrier to entry (and massive global repetition) as software developers had to write the same heavy lifting modules to get common tasks done. Take for example making a HTTPS web request, where they had to write code to:

  • Open a TCP connection on port 443
  • Handle TLS negotiation and exchange certificates
  • Validate the certificates
  • Manage the TCP connection (and any connection pooling)
  • Format HTTP requests
  • Interpret HTTP responses

That is a lot of work when all the developer wanted to do was to get or send some data to / from some remote server. This is the reason why engineers left this work to software developers.

Now, thanks to the Open Source community, social code-sharing and collaboration sites like GitHub, and public package repositories, the developer communities around these new modern programming languages are building and sharing Open Source software libraries that help to encourage reuse and reduce duplicate work. Leveraging these community-created libraries can save you tremendous amounts of time and effort, and they enable you to focus your time and effort on what you want your code to do: your codified process.

You can make a HTTPS request without much personal investment, because of the work done by these online communities.

$ pip install requests
Collecting requests
  Using cached
<-- output omitted for brevity -->
$ python
>>> import requests
>>> requests.get("https://api.github.com")
<Response [200]>

What you are seeing here is the following:

  • We installed a community library from a public package repository ( pip install requests )
  • We entered a Python interactive shell ( python )
  • We imported the library into our Python code ( import requests )
  • We made a HTTPS request to https://api.github.com and it was successful ( <Response [200]> )

Starting with installing the requests package on our machine, in four typed lines in a terminal we were able to download and install the package and use it to make a HTTPS request (without having to think about the steps involved with making the HTTPS request).

Now that languages and tools have evolved to be useful for infrastructure engineers, APIs have become easier to work with.

API Maturity

Gone are the days where it took an expert programmer to work with a product's API. Previous API standards like SOAP proved themselves to be not so simple, and easier to use API models like RESTful APIs have taken their place.

Now, thanks to RESTful APIs and standardized data formats like JSON, you can make requests of your infrastructure with the same ease these modern programming languages provide.

Coding essentials

Let's do a quick review of the different foundational coding building blocks that network engineers will need to understand and use when entering the programmability world.

YANG data models

Data models are conceptual representations of data, that define what specific information needs to be included and the format to represent it. A data model can be accessed by multiple source applications, via different communication protocols.

YANG (Yet Another Next Generation) is a data modelling language defined originally in RFC 6020 and updated later in RFC 7950. It uses XML to describe the data model for network devices, and it is composed of modules and sub-modules that represent individual YANG files. YANG modules are self-documenting hierarchical tree structures for organizing data.

+--rw interfaces
      |  +--rw interface* [name]
      |     +--rw name                        string
      |     +--rw description?                string
      |     +--rw type                        identityref
      |     +--rw enabled?                    boolean
      |     +--rw link-up-down-trap-enable?   enumeration
      +--ro interfaces-state
         +--ro interface* [name]
            +--ro name               string
            +--ro type               identityref
            +--ro admin-status       enumeration
            +--ro oper-status        enumeration
            +--ro last-change?       yang:date-and-time
            +--ro if-index           int32
            +--ro phys-address?      yang:phys-address
            +--ro higher-layer-if*   interface-state-ref
            +--ro lower-layer-if*    interface-state-ref
            +--ro speed?             yang:gauge64
            +--ro statistics
               +--ro discontinuity-time    yang:date-and-time
               +--ro in-octets?            yang:counter64
               +--ro in-unicast-pkts?      yang:counter64
               +--ro in-broadcast-pkts?    yang:counter64
               +--ro in-multicast-pkts?    yang:counter64
               +--ro in-discards?          yang:counter32
               +--ro in-errors?            yang:counter32
               +--ro in-unknown-protos?    yang:counter32

As you can see in the previous example, YANG modules are used to model configuration and state data. Configuration data can be modified (rw), while State data can only be read (ro).

YANG is based on standards from IETF, OpenConfig and others. It is supported by most networking vendors in their own devices, and allows them to augment or deviate models, in order to include vendor / platform specific information.

YANG data models are publicly available here. As you browse through the hundreds of them, you might soon realize that finding the model you are looking for may be quite time-consuming. To make your life easier please take a look at Cisco YANG Explorer, an open-source YANG browser and RPC builder application to experiment with YANG data models.

Once you decide to use YANG data models in your code, you will need to use libraries for your preferred programming language. If your choice is Python, as it is for many network engineers, you should definitely checkout pyang. This Python library can be used to validate YANG modules for correctness, to transform YANG modules into other formats, and even to generate code from the modules.

Finally you might also be interested in taking a look at the capabilities offered by the YANG Catalog, a registry that allows users to find models relevant to their use cases from the large and growing number of YANG modules being published. You may read-access it via NETCONF or REST, to validate YANG modules, search the catalog, view module's details, browse modules and much more.

JSON and XML

Now that we know how to model data and store it locally, we need to start considering how to communicate it machine-to-machine. It is critical that our system knows how to send requests to network devices, and what format to expect when receiving responses.

The classic approach with CLI provides us with structured data:

GigabitEthernet1 is up, line protocol is up
Description: TO_vSWITCH0
  Internet address is 172.16.11.11/24
  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
      reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full Duplex, 1Gbps, media type is RJ45

This type of text output is great for human-machine interaction, because our brain easily understands the information reading through it. However this is not a good format for machine-to-machine communication, because the system receiving this text would need to be programmed to parse through it, in order to extract the values for the different included fields. Yes, we could program the system to do it, using regular expressions. But there would be important drawbacks: not only implementing how to extract the relevant keys and values, but also how to do it for different platforms and vendors. Please consider that each OS will provide a slightly / largely different text output to show the same kind of info. So we would need to parse things differently for each case... definitely not the best approach.

Considering that we have defined a common data model, let's also agree on a common format to exchange that data. Instead of the previous text we would like to receive something like the following:

{
    "description": " TO_vSWITCH0",
    "ipv4Address": "172.16.11.11",
    "ipv4Mask": "255.255.255.0",
    "portName": "GigabitEthernet1",
}

This is an example of data in structured format, and it is critical for our systems to easily process information exchanged between machines.

There are two common formats for data interchange being used these days: JSON and XML.

JSON

JSON (JavaScript Object Notation) is more modern and commonly used by new APIs. With its simple key:value approach, it is very lightweight, easy for systems to generate and parse, but also easy for humans to read.

{
    "className": "GRETunnelInterface", 
    "status": "up",
    "interfaceType": "Virtual"
    "pid": "C9300-48U",
    "serialNo": "FCW2123L0N3",
    "portName": "Tunnel201"
}

No, you don't need to know any JavaScript to work with JSON. They just happen to share the syntax, but no need at all to be a JavaScript developer when using JSON as the data transfer format between systems.

Python users can easily work with JSON, using its own standard library:

import json

This library allows you to easily work with JSON as native Python objects. Very often you will import JSON data into Python dictionaries, with an array of key:value pairs that enables you to search for the field you require by just running a standard search for a certain key.

Later we will discuss communication protocols, but for your reference please make a note that both REST APIs and RESTCONF support JSON and XML.

XML

XML (eXtensible Markup Language) is a bit older, but still used by a lot of APIs. It is used for data transfer, but sometimes also to store info. It is language-independent and designed to be self-descriptive, although, compared to JSON, tagging makes it a little bit more difficult to read for humans.

{
    <interface>
        <name>GigabitEthernet1</name>
        <description>TO_vSWITCH0</description>
        <type xmlns:ianaift="urn:ietf:params:xml:ns:yang:
                  iana-if-type">ianaift:ethernetCsmacd</type>
            <enabled>true</enabled>
            <ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip">
                <address>
                    <ip>172.16.11.11</ip>
                    <netmask>255.255.255.0</netmask>
                </address>
            </ipv4>
    </interface>
}

XML is not the same as HTML: XML carries data, while HTML represents it.

Python users also benefit from multiple available resources to work with XML, like ElementTree objects, Document Object Model (DOM), Minimal DOM Implementation (minidom), and xmltodict.

You may learn more about XML in this tutorial.

By now you should have a clearer view on the relationship between YANG and JSON/XML. YANG is the data model that shows information about network devices configuration and status. JSON and XML are data exchange formats to represent the information stored in the data model, so it can easily be understood by both machines and humans.

JSON displays information in a clearer way and will be used more frequently by modern systems. However XML is still required for multiple systems that support it exclusively.

NETCONF and RESTCONF

Now that we understand data models and data transfer formats, we need to consider what protocol to use in order to exchange that information. NETCONF and RESTCONF are different protocols that you will need to use depending on the availability provided by your platform.

NETCONF

Network Configuration Protocol (RFC 6241), is a network management protocol developed and standardized by the Internet Engineering Task Force (IETF). It supports a rich set of functionality to manage configuration and operational data, being able to manage network devices running, candidate and startup configurations. The NETCONF protocol defines a simple mechanism through which a network device can be managed, configuration data can be retrieved, and new configuration data can be uploaded and manipulated. The NETCONF protocol uses Remote Procedure Calls (RPCs) for its paradigm, such as get-config, edit-config, or get. A client encodes an RPC in XML and sends it to a server using a secure, connection-oriented session (such as Secure Shell Protocol [SSH]). The client (application) initiates a connection using SSH port 830 towards the server (network device). The server responds with a reply encoded in XML, and there is a capability exchange during session initiation, using XML encoding.

Let' take a look at an example on how we could use Python to connect to a device via NETCONF.

from ncclient import manager
import xml
import xml.dom.minidom

with manager.connect(host=RW_HOST, port=PORT, username=USER, password=PASS, hostkey_verify=False, device_params={'name': 'default'}, allow_agent=False, look_for_keys=False) as m:
    # XML filter to issue with the get operation
    # IOS-XE 16.6.2+        YANG model called "ietf-interfaces"
    interface_filter = '''
        <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
            <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
                    <interface>
                        <name>GigabitEthernet1</name>
                    </interface>
            </interfaces-state>
        </filter>
    '''
    result = m.get(interface_filter)
    xml_doc = xml.dom.minidom.parseString(result.xml)

We start by importing the NETCONF and XML libraries we will be using (ncclient is a Python library that facilitates client-side scripting and application development around the NETCONF protocol). Then we connect to the device IP (RW_HOST), using the specified port for SSH (PORT) and the required credentials (USER/PASS). Once connected we define specifically what we want to receive (interface_filter) and make the request (m.get). get is the method used to request operational data, but you could also ask for configuration data using get-config, or modify that configuration using edit-config. Final step is just to parse the result into a Python dictionary, using the minidom library, to be able to work it.

And voilá, you get an XML response showing operational data for the requested interface.

<rpc-reply message-id="urn:uuid:50bf9d6e-7e5c-4182-ae6b-972a055ceef7" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
  <data>
    <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
      <interface>
        <name>GigabitEthernet1</name>
        <admin-status>up</admin-status>
        <oper-status>up</oper-status>
        <phys-address>00:0c:29:6c:81:06</phys-address>
        <speed>1024000000</speed>
        <statistics>
          <in-octets>5432293472</in-octets>
          <in-unicast-pkts>28518075</in-unicast-pkts>
          ……………
          <out-octets>2901845514</out-octets>
          <out-unicast-pkts>18850398</out-unicast-pkts>
        </statistics>
      </interface>
    </interfaces-state>
  </data></rpc-reply>

RESTCONF

RESTCONF (RFC 8040) is based on the idea of adding a REST API to NETCONF. It can manage manage configuration and operational data defined in YANG models, and the URLs, HTTP verbs, and Request bodies are automatically generated from those associated YANG models. RESTCONF uses HTTP(S) as transport, and supports both XML and JSON as data transfer formats, while NETCONF only supports XML. Also, RESTCONF supports only a sub-set of NETCONF, so not all operations are supported.

Remember that since REST principles are being used, RESTCONF is based on stateless connections. As such, every application using RESTCONF writes directly to the running configuration, with no support for candidate configuration.

Being based on REST, RESTCONF supports the following methods:

  • GET, to read/retrieve info
  • POST, to create a new record
  • PATCH, to update only some values of an existing record
  • PUT, to update all values of an existing record
  • DELETE, to erase an existing record

Let's take a look at how to use it.

url = 'https://RO_HOST/restconf/data/interfaces-state/interface=GigabitEthernet1'

header = {'Content-type': 'application/yang-data+json',
          'accept': 'application/yang-data+json'}

response = requests.get(url, headers=header, verify=False, auth=ROUTER_AUTH)
interface_info = response.json()
oper_data = interface_info['ietf-interfaces:interface']

In this case we are sending a HTTP(S) request to our network device REST API. The URL structure will include the network device IP address (RO_HOST) and the resource we are asking about (interface=GigabitEthernet1). Then we will have to define the HTTP headers to send, specifying in this case what is the content type we are sending (YANG encoded in JSON) and the content we expect to receive in the response (YANG encoded in JSON). Finally we parse the JSON into a Python dictionary and extract the relevant info from the structured data.

{
    "ietf-interfaces:interface": {
        "name": "GigabitEthernet1",
        "admin-status": "up",
        "oper-status": "up",
        "last-change": "2018-01-17T21:49:17.000387+00:00",
        "phys-address": "00:0c:29:6c:81:06",
        "speed": 1024000000,
        "statistics": {
            "in-octets": 5425386232,
            "in-unicast-pkts": 28489134,
            ……………
            "out-octets": 2899535736,
            "out-unicast-pkts": 18844784
        }
    }
}

So the overall picture looks like this now:

Network devices information is modelled in YANG to make it consistent, independent of the underlying infrastructure. Then than information can be represented with JSON or XML, and accessed by mean of NETCONF or RESTCONF from a remote client.

REST APIs

By now you might be wondering what is REST? It stands for Representational State Transfer, and it was born from the need to create a scalable Internet, where software systems could interact with each other, in an uniform and efficient approach.

It is a simple-to-use communications architecture style (not a standard) for networked applications, based on the client-server model. It expects all information required for the transaction to be provided at the time of the request. Client could be an application or a REST client, like Postman for development and testing. Server could be a system, network device, or network management application.

REST is stateless, so the server will close the connection after the specified exchange is completed, and no state will be maintained on the server side. This way it makes transactions very efficient.

The same as you use a HTTP get method when browsing the internet and the server provides you with a website in HTML format that your browser decodes to make it human readable, REST APIs answer to get requests from other systems with structured data (in JSON or XML) specifically addressed to them.

Think about SDN and NFV, where different types of controllers need to communicate and exchange information with multiple devices. Applications sitting on top of those controllers can actually query anything that the controller knows about the network below it. This can be operational data, configuration data stats about a single device with a 10GE interface, etc. Applications then take this information, process it and then program the controller by sending a post instead of a get request.

RESTful APIs are REST-based APIs, based on response-request communications using the HTTP protocol for the following operations (CRUD):

  • Post: Create a new resource
  • Get: Retrieve/Read a resource
  • Put: Update an existing resource
  • Delete: Delete a resource

It includes five components that may be required in each Request:

  • URL: application server and the API resource
  • Auth: there are few different authentication methods, not standardized, required to identify who is making the request (HTTP Basic, Custom, OAuth, none)
  • Headers: define content-type and accept-type, communicating to the server the format of data we will send and expect to receive (JSON or XML)
  • Request Body (optional): may be missing if no data is required to be sent with the request
  • Method: What is the task we ask the server to perform (ie. use POST to create a new record, or PUT to update an existing one)

Let's take a look at the format in this example:

    url = DNAC_IP + '/api/v1/host?hostIp=' + client_ip
    header = {'content-type': 'application/json', 'Cookie': dnac_jwt_token} 
    response = requests.get(url, headers=header, verify=False)
    client_json = response.json()
    client_info = client_json['response'][0]

First we need to define the URL with the IP address of the end system (ie. DNAC_IP) and the route to the required resource (ie. /api/v1/host?hostIp= combined with the IP of an end system). Then we specify the required headers, defining what is the format we are sending (JSON) and the required auth cookie. With that info we open the connection, make the request and store the response to parse it.

As long as these are HTTP requests we are sending, server will answer with a HTTP status code, headers and a response body.

Some possible HTTP status codes:

  • 2xx Success: 200 OK, 201 Created
  • 4xx Client Error: 400 Bad Request, 401 Unauthorized (something is wrong the authentication), 404 Not Found (most likely URL is wrong, or payload is wrongly formatted)
  • 5xx Server Error: 500 Internal Server Error

Headers will define the content-type (JSON or XML), cache control, date and encoding.

The response body will be the payload, including the requested data in JSON or XML, depending on the headers provided during the request.

Response 200 / success
Cache-Control →no-cache
Content-Type →application/json;charset=UTF-8
…
{
    "hostIp" : "10.93.140.35" , 
    "hostMac" : "00:0c:29:6d:df:40" , 
    "hostType" : "wired" , 
    "connectedNetworkDeviceId" : "601c9ead-576c-402d-bcb1-224235b1e020" , 
    "connectedNetworkDeviceIpAddress" : "10.93.140.50" , 
    "connectedInterfaceId" : "eb613db0-0994-44ec-9146-1b65346f3d07" , 
    "connectedInterfaceName" : "GigabitEthernet1/0/13" , 
    "connectedNetworkDeviceName" : "NYC-9300" , 
    "vlanId" : "123" , 
    "lastUpdated" : "1528324633014" , 
    "accessVLANId" : "123" , 
    "id" : "841f9433-0d2c-4735-afe8-beb7547b7883"
}

API Documentation

Documentation is always essential, but in this case even more, because REST APIs are an architectural style, not a standard. So docs will define specifically what you need to send to your network device, and what you should expect in return.

Quality of the API documentation is the most important factor in API adoption, because it determines how difficult is to work with your APIs. You might have the most powerful APIs, but if they are not documented correctly nobody will be able to leverage them.

APIs are very often documented in the platform itself, offering you the option to test them directly there without needing to write any code, or even know a programming language.

It is also common for them to offer you the option to automatically generate sample code in different programming languages, so you can directly use it in your developments.

Python

When talking about programmability and APIs you need to pick your favorite programming language to let your system know what you want it to do, and how it needs to communicate with your network devices APIs. The goal will be to automate and script actions using the APIs provided by network devices, controllers, and applications. There are a myriad of different options when choosing your programming language (Python, Ruby, Go, JavaScript, C#, etc) and each developer will have his/her own preferences.

One very good option for network engineers to get started with programming is Python. It is one of the most popular programming languages across the globe for several reasons:

  • Lots of available resources
  • Extensive libraries
  • Most SDKs developed in Python
  • Powerful and fast
  • Ubiquitous
  • Easy to learn and friendly
  • Open
  • Wide support on different devices and platforms
  • Rich and active support communities
  • Most wanted language in 2017 & 2018

Summary

APIs and programming languages have evolved and matured to the point of being useful and applicable to the domains of infrastructure engineers.

The net-effect being that you can get powerful things done with relatively small amounts of code. And by so doing, you can automate the repetitious and/or labor intensive parts of your job freeing you up to focus your time and effort on tasks deserving of your intellect.

Network programmability provides consistent and dynamic infrastructure configuration by automating deployments and simplifying network management, bringing the following main benefits:

  • Automation
    • Time and cost optimization
    • Reduce errors
  • Integration
  • Innovation

NetDevOps

DevOps principles are not exclusive to software development, and some of them can definitely be applied to infrastructure configuration. NetDevOps brings the culture, technical methods, strategies and best practices of DevOps to network management.

Sometimes it is referred to by different names, like DevNetOps, NetOps, or SuperNetOps. But in general it is related to the more generic term Network Reliability Engineer (also coming from the DevOps counterpart Site Reliability Engineering).

The challenge of network configuration today

Networks exist to provide connectivity for end-systems and applications, so obviously they have a critical role in any type of service. Everything needs connectivity, so the network is certainly a fundamental asset in any modern enterprise these days. Its functionality has become so critical that most business nowadays would not be able to survive without connectivity.

However there is a very common perception that the network is actually fragile.

Key network engineers that have been working long enough on a certain network become gurus. They are the ones that know the why and how of multiple specific configurations: why that had to be done last year on those core routers, how many neighbors should be seen by a certain edge router, or what that propagated BGP community means. Every box has a unique configuration to accommodate whatever was required at a specific point in time: troubleshooting or debugging a certain issue, that small fix in the routing protocol weight to determine the right interface to use, or those interfaces that are down and nobody knows if they should actually be up or not. Sequential and manual provisioning leads into a situation where each network device becomes a snowflake, due to how its configuration has changed organically according to whatever was required along since it was installed.

Without these key engineers there is a fear that network changes will go wrong. So operations teams tend to minimize the number and frequency of changes in their networks. Nobody wants to affect that precious business traffic and be pointed at by the CTO as the person responsible for that big failure. So changes rarely happen. And when they happen they are BIG, because there is a backlog of things to do. The bigger the change, the more possibilities that something will fail. Besides this, teams are not well practiced because changes do not happen often. Fixing an issue while operating a network live, or performing a rollback quickly, requires practice. So now any problem that happens during the maintenance window will lead to the perception that the network configuration change was a failure.

Furthermore, applying network-wide policies becomes a task proportionally tedious to how big the network is. For example, consider a possible Infosec recommendation to change SNMP strings every 3 months. Doing it manually in a big network might require a number of engineers performing those changes simultaneously across the network, maybe during a maintenance window by night to make sure systems can be synchronized next morning. This manual process involves quite some manual interaction, which is definitely prone to errors.

This type of considerations is very similar to the ones they had in classic software development. With their monolith architectures and bi-annual software updates, they suffered from similar challenges. And then they started doing things different, with things like Agile, DevOps, CICD pipelines and automated unit testing.

Applying this same type of principles to network configuration is what we called NetDevOps, and it will provide similar benefits to the ones software developers obtained while implementing this practices in their own environment. But it will require big cultural changes, like:

  • Embracing failure and learning from it for the future
  • Understand that change is good
  • Collaborate actively between network developers and operations teams
  • Empower teams to take ownership and responsibility
  • Provide feedback systems that are actually useful to iterate and improve processes
  • End-to-end automation for the whole lifecycle of changes

What if network engineers started working with network configurations the same way software developers work with their code?

What if we could create automated pipelines for those network configurations, that worked like CICD does for software development?

What if the network could be continuously monitored for health and improvement?

Now that would be a game changer. Not only in the way we manage our networks, but also in how we scale up, how we automate repetitive tasks, how different teams collaborate, and how we improve the reliability of our networks.

Let's explore it.

Network configuration as code

With the advent of Cloud computing we have now the capabilities to provision and manage ephemeral data centre resources (compute and connectivity) via machine-readable definition files. These files can be treated as common code, utilizing the same version control systems and best practices we use for software development, with goals like providing automation, improving efficiency and reducing errors. This is called Infrastructure as Code, or IaC.

We could follow the same approach with network device configurations, and this is what we call Network as Code. It is based on the idea of storing all network configurations in a Version Control System (VCS) that manages and tracks changes in the network. This system storing all configurations for the whole network would be considered the Single Source of Truth for all-things network configuration.

In this new mode of operation, network configuration changes are proposed in code branches, like software code developers do. These branches are safe places where network developers will be able to work safely on their proposed configurations, without affecting the master branch, where master configurations reside. Once these configurations are ready, developers will request their branch to be merged with the master configurations, and will go through an approval process to verify there are no issues when incorporating these changes.

Continuing with the emulation of DevOps automation capabilities, this will lead into using CICD (Continuous Integration and Delivery) Build Servers to automatically deploy and test the proposed configurations in testing, staging and production environments. Configurations that successfully pass the complete tests set, will be deployed into the production environment. In case of failure during that final deployment, the system itself will automatically rollback the proposed changes, leaving the production network in the previous state just before the change.

And considering that modern network devices support modern interfaces and APIs, let's leverage those to deploy our configurations across the network in an optimal way, instead of using the classic, slow and error-prone command-line interface.

Following this strategy, we are now ready to start building a completely automated environment to deploy and test configuration changes across the network.

NetDevOps Demonstrations

Now that you know about some of the most important building blocks for programmability, it is time to see them working together and how they are used to build business-relevant solutions that help managing our networks. And what better way to learn about them than getting our hands dirty by going through some demos?

The following set of demos requires a sandbox: an environment where you have all the required platforms and elements that you will need for those demos. In our case we need a big server to run VIRL simulations for all network devices we will discuss later, and another server to run our VCS, NSO, etc.

You may find the required sandbox for our demo using this link, and book it for up to one week exclusively for you.

Note: when doing the reservation please choose 'None' for simulation, as we will be launching the required topologies as part of the setup process.

Spinning up the whole system will take roughly 15 mins, so please look at this strangely satisfying pendulum while we get everything ready for you.

Once the setup is ready you will receive an email with all required information to VPN into your sandbox. If you do not have a VPN client you may download AnyConnect here. Connect to your VPN and you are now ready to start working on your demos!

NetDevOps Demo 1 - Automating network configuration from testing to production

NetDevOps will deliver consistent version-controlled infrastructure configurations, deployed with parallel and automated provisioning.

And what better way of understanding the real benefits of NetDevOps than building your own setup and seeing how it works? The goal will be to create a complete environment that demonstrates the following benefits across the whole network:

  • Track the status of network configurations at any point in time
  • Track who proposed and approved each specific configuration change
  • Provide visibility on what are the differences of configurations at any point in time vs a previous situation
  • Enable rollback to any previous moment
  • Provide syntax-checking capabilities for network changes in your own local workstation
  • Automate the deployment of any proposed change across different environments (eg. testing, staging, production)
  • Model simulated virtual environments to test proposed changes before going to production
  • Define and run the required tests set and passing criteria, both in testing and production, before accepting a change as successful
  • Automatically rollback any proposed configuration that does not pass the tests set

These are the building blocks we will use to provide such a comprehensive demonstration:

  • GitLab: Version Control Server (VCS) with integration capabilities to provide automated pipelines
  • Cisco Network Services Orchestrator: formerly Tail-f, it provides end-to-end automation to design and deliver services much faster
  • pyATS: automation tool to perform stateful validation of network devices operational status with reusable test cases
  • VIRL: network modelling and simulation environment
  • Ansible: simple automation

GitLab setup

Open a terminal window (ie. putty on Windows or terminal on OSX) and ssh to your devbox with the following credentials: developer/C1sco12345

$ ssh developer@10.10.20.50

Once in, clone the repository that includes all required files to build the setup into your devbox.

[developer@devbox ~]$git clone https://github.com/DevNetSandbox/sbx_multi_ios.git

With that, your sandbox devbox includes now all required info to start building the environment.

[developer@devbox ~]$cd sbx_multi_ios/gitlab
[developer@devbox gitlab]$./setup.sh

setup.sh will start and configure your Version Control Server, a GitLab instance inside a Docker container running in your devbox.

The process will take like 5 minutes, so check this out in the meanwhile.

Once your terminal shows the process is finished, you may check with docker ps that your GitLab containers are running, and how they offering their service in port 80.

[developer@devbox gitlab]$docker ps
CONTAINER ID        IMAGE                  COMMAND                  CREATED             STATUS                PORTS                                                                                       NAMES
5cd18a397811        gitlab/gitlab-ce       "/assets/wrapper"        2 days ago          Up 2 days (healthy)   0.0.0.0:80->80/tcp, 0.0.0.0:4567->4567/tcp, 0.0.0.0:32769->22/tcp, 0.0.0.0:32768->443/tcp   gitlab_gitlab_1
182c5937b931        gitlab/gitlab-runner   "/usr/bin/dumb-init …"   2 days ago          Up 2 days

Please point your browser to http://10.10.20.50, the IP address of your devbox (default port 80), and check that you can access the HTTP interface for your new GitLab service.

CICD setup

Now that GitLab is ready, go back to your terminal and let's run the script to setup the complete CICD environment.

[developer@devbox gitlab]$cd ../cicd-3tier
[developer@devbox cicd-3tier]$./setup.sh

In this case setup.sh will perform the following actions:

  1. Launch the required VIRL simulations for two different environments: test and production
  2. Start NSO
  3. Import test and production network configurations from VIRL to NSO
  4. Synchronize devices configuration from NSO into VIRL simulations
  5. Create a new repo in GitLab and initialize it locally in your devbox
  6. Create locally in devbox the prod and test git branches and push them to GitLab
  7. List the status of VIRL nodes in production and test

This complete process will take like 10 minutes, so time for your fix.

Congrats, everything is now installed and ready!

VIRL verifications

Now you have two complete simulated environments running in your VIRL server: one for testing, and one replicating what would be a production physical network. Real world scenarios might be diverse: some customers may have a physical network in production, but only a simulated one for testing. Others might also have a real network for testing. Maybe even an additional one for staging before going to production. No matter how, the same principles apply to what we will be demonstrating. In our case the sandbox includes a couple of virtual environments, like the one depicted below, and implemented with VIRL for convenience.

As you can see each environment includes a standard 3-tier architecture, with 2x IOS-XE routers in the Core, 2x NX-OS switches in Distribution, and another 2x NX-OS switches in the Access layer.

You may find VIRL definitions for these two environments at the following locations in your devbox:

  • /home/developer/sbx_multi_ios/cicd-3tier/virl/test/topology.virl
  • /home/developer/sbx_multi_ios/cicd-3tier/virl/prod/topology.virl

Please make sure all your simulated routers are readily available (REACHABLE status) in both prod and test. If they are not, your demonstration will fail in different stages.

[developer@devbox test]$pwd
/home/developer/sbx_multi_ios/cicd-3tier/virl/test
[developer@devbox test]$virl nodes
Here is a list of all the running nodes
╒══════════════╤═════════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕
│ Node         │ Type        │ State   │ Reachable   │ Protocol   │ Management Address   │ External Address   │
╞══════════════╪═════════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡
│ test-dist1   │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.213        │ N/A                │
├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ test-access1 │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.215        │ N/A                │
├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ test-dist2   │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.214        │ N/A                │
├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ test-core2   │ CSR1000v    │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.212        │ N/A                │
├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ test-core1   │ CSR1000v    │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.211        │ N/A                │
╘══════════════╧═════════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛
[developer@devbox test]$cd ../prod
[developer@devbox prod]$virl nodes
Here is a list of all the running nodes
╒═════════╤═════════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕
│ Node    │ Type        │ State   │ Reachable   │ Protocol   │ Management Address   │ External Address   │
╞═════════╪═════════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡
│ core2   │ CSR1000v    │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.222        │ N/A                │
├─────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ core1   │ CSR1000v    │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.221        │ N/A                │
├─────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ access1 │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.225        │ N/A                │
├─────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ dist2   │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.224        │ N/A                │
├─────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ dist1   │ NX-OSv 9000 │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.223        │ N/A                │
╘═════════╧═════════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛

If any of the nodes stay in UNREACHABLE status please try the following:

  1. Go into the environment directory (prod or test) and restart the node.

    [developer@devbox cicd-3tier]$cd virl/test
    [developer@devbox test]$virl stop test-dist2
    [developer@devbox test]$virl start test-dist2
    
  2. Connect into that specific node (with virl ssh or virl console) and reboot it (password is cisco).

    [developer@devbox test]$virl ssh core1
    Attemping ssh connectionto core1 at 172.16.30.221
    Warning: Permanently added '172.16.30.221' (RSA) to the list of known hosts.
    cisco@172.16.30.221's password:
    
    
    core1#reload
    
  3. If it still refuses to cooperate, stop the whole environment...

    [developer@devbox test]$cd /home/developer/sbx_multi_ios/cicd-3tier
    [developer@devbox cicd-3tier]$./cleanup.sh
    

    ... and then restart it.

    [developer@devbox cicd-3tier]$./setup.sh
    

Now that both of your VIRL environments are ready, let's setup your local environment.

Local environment setup (optional)

To experience and demonstrate the full NetDevOps configuration pipeline, you may want to setup a local development environment where you can test proposed configuration changes before committing and pushing them to GitLab for the full test builds to occur. This is a completely optional step you might want to skip if you are not interested in testing locally.

To complete this step you will need to have a few local pre-requisites setup on your local workstation.

1. Common software: install Java JDK, python and sed (brew install gnu-sed in OSX)

2. Network Service Orchestrator: in order to test the configuration pipeline locally, you'll need to have a local install of NSO on your workstation. Furthermore, you will need to have the same versions of NSO and NEDs (network element drivers) installed as the DevBox within the Sandbox. Using different versions may work, but for best experience matching the versions exactly is recommended.

Once downloaded, you would install NSO in OSX like this:

$ sh nso-4.5.3.darwin.x86_64.signed.bin
$ sh nso-4.5.3.darwin.x86_64.installer.bin ~/ncs-4.5.3 --local-install

You may download the required NEDs from your sandbox devbox via SCP to your own workstation.

$ scp developer@10.10.20.50:/usr/src/nso/ncs-4.5.3-cisco-ios-5.8.signed.bin .
$ scp developer@10.10.20.50:/usr/src/nso/ncs-4.5-cisco-nx-4.5.10.signed.bin .
$ scp developer@10.10.20.50:/usr/src/nso/ncs-4.5-cisco-iosxr-6.2.10.signed.bin .

Install those NEDs, by running the following two commands for each downloaded binary...

$ sh <bin_file>
$ tar -xzvf <gz_file>

... and then move each uncompressed folder into ~/dev/ncs-4.5.3/packages/neds, replacing the existing ones.

Check all required NEDs are installed.

$ ls $NCS_DIR/packages/neds/

Once you have installed these versions, you'll need to source the ncsrc file for this version before beginning the local development process.

$ source ~/ncs-4.5.3/ncsrc

Don't forget to include this command in your startup shell (eg .zshrc)

Now you can test your local NSO installation.

First, setup the required structure and environment in your preferred directory.

$ ncs-setup --dest ~/ncs-run

Then start the NCS daemon.

$ cd ~/ncs-run
$ ncs

Check if NCS started correctly.

$ ncs --status

Start the CLI to connect to NCS...

$ ncs_cli -u admin

... or connect via SSH (default password is admin).

$ ssh -l admin -p 2024 localhost

Point your browser to http://localhost:8080/ (credentials arer admin/admin).

If everything works correctly you may now stop the NCS daemon.

$ ncs --stop

Congrats, your NSO local installation is complete!

3. Python + Ansible

The network-as-code mechanism in this demonstration leverages both Ansible and NSO, with Ansible orchestrating the execution and configuration used by NSO to deploy to the network. In order to test locally, you'll need to have a Python environment (virtual environment is recommended) that meets these requirements.

  • Python 3.6.5 or higher
  • Ansible 2.6.3 or higher

Once you install them, and with your virtual environment active, install the requirements.

$ python3 -m venv env
$ source env/bin/activate
$ pip install -r requirements.txt

All pre-requisites are now complete!

Let's now dig into setting up the local environment in your workstation.

  1. Clone a copy of the repository from GitLab to your local workstation. Use this command to ensure the demo credentials are embedded in the git configuration. Please note this first repo clone might take some time, so you will need to be patient.

    $ git clone http://developer:C1sco12345@10.10.20.50/developer/cicd-3tier
    $ cd cicd-3tier
    
  2. To simplify the setup and management of the local environment, a Makefile is included in the repository. Simply run make dev to do the following (to see the exact commands being executed for each of these steps, just take a look at the content of your Makefile):

    a. Use NCS netsim to start a local simulation of the network including the core, distribution, and access devices

    b. Setup a local NCS project directory within the repo, start NCS and import in the netsim simulation

    c. Synchronize netsim and NCS

    d. Deploy the current network-as-code configuration to NCS and the network devices, using Ansible

    $ make dev
    

    Let's examine what is happening here, by going through the content of the Makefile.

    $ cat Makefile
    

    You will see the first line defines the different steps that are part of the dev directive.

    dev: netsim nso sync-from dev-deploy
    

    These steps are defined later in the same Makefile. You may also run them independently if you want to execute only that special step (eg. make netsim).

    a. Start netsim

    netsim:
        -ncs-netsim --dir netsim create-device cisco-ios core1
        -ncs-netsim --dir netsim add-device cisco-ios core2
        -ncs-netsim --dir netsim add-device cisco-nx dist1
        -ncs-netsim --dir netsim add-device cisco-nx dist2
        -ncs-netsim --dir netsim add-device cisco-nx access1
        -ncs-netsim start
    

    These ncs-netsim commands create netsim devices in the netsim directory, using the specified NEDs (ie. cisco-ios or cisco-nx) and a certain name (ie. coreX, distX, accessX). Then the last step starts these devices locally in your workstation. Netsim devices are a quick and easy way to emulate the management plane and test configuration changes locally, with no risk involved in the test or production networks.

    You may check your netsim devices started correctly and their ports configuration, with:

    $ ncs-netsim is-alive
    $ ncs-netsim list
    

    You can also connect to your netsim devices CLI, and check with show run that nothing is configured yet. For example, to connect to core1:

    $ ncs-netsim cli-c core1
    

    b. Start NSO

    nso:
        -ncs-setup --dest . --package cisco-ios --package cisco-nx
        -ncs
    

    This nso directive prepares the current directory (--dest .) for a local NCS project, with the NEDs it will use (ie. cisco-iosand cisco-nx), and then it starts NCS.

    It is important to note that NCS will automatically detect and add existing local netsim devices.

    You may login into NSO CLI and check the discovered devices (your netsim devices in this case) with:

    $ ncs_cli -C -u admin
    
    admin connected from 127.0.0.1 using console on JGOMEZ2-M-D2KW
    admin@ncs# show devices brief
    NAME     ADDRESS    DESCRIPTION  NED ID
    ------------------------------------------
    access1  127.0.0.1  -            cisco-nx
    core1    127.0.0.1  -            cisco-ios
    core2    127.0.0.1  -            cisco-ios
    dist1    127.0.0.1  -            cisco-nx
    dist2    127.0.0.1  -            cisco-nx
    admin@ncs#
    

    You may also see the devices configuration stored in NSO (not configured yet). For example, for core1:

    admin@ncs# show running-config devices device core1
    

    c. Synchronize netsim and NCS

    sync-from:
        -curl -X POST -u admin:admin http://localhost:8080/api/running/devices/_operations/sync-from
    

    This step will synchronize initial configurations from netsim devices into NCS. Check the configuration of your devices in NCS again, and you will see they include interfaces definitions now (eg. Loopback, Eth, FE).

    d. Apply configurations

    dev-deploy:
        -ansible-playbook --syntax-check -i inventory/dev.yaml site.yaml
        -ansible-playbook -i inventory/dev.yaml site.yaml
    

    This last directive uses Ansible to first check the syntax (linting), and then executes the site.yaml playbook on the list of devices defined in the dev.yaml inventory file.

    The inventory file (dev.yaml) lists the devices that will be configured by the playbook, with their hostnames, credentials (if necessary) and management IP addresses:

    • NSO
    • One access switch
    • Two core routers
    • Two distribution switches

    If you review the playbook itself (site.yaml) you will find it executes the following steps:

    1. Synchronize old configurations from NSO to devices
    2. Push new configurations to NSO
    3. Synchronize new configurations from NSO to devices

    But specifically for the second step you might be wondering where are those new configurations?

    Take a look at this extract from site.yaml, describing that second step:

    - name: Push new configurations to NSO
    hosts: all
    connection: local
    gather_facts: no
    
    tasks:
        - name: Device configuration
        nso_config:
            url: "{{ nso.url }}"
            username: "{{ nso.username }}"
            password: "{{ nso.password }}"
            data:
            tailf-ncs:devices:
                device:
                - name: "{{ nso_device_name }}"
                tailf-ncs:config:
                    "{{ config }}"
    

    That tasks description uses the nso_config module, and provides the required NCS URL, username and password, as parameters defined in the inventory file mentioned before.

    The data section is the one that describes what configuration to apply, and there you may find you need to provide the device_name and config. Device names come again from the inventory file. BUT configurations are stored in the host_vars directory, where Ansible looks for variables as required. That directory stores individual YAML files, one per device, with the required configuration to apply to NCS devices.

    These configuration files in the host_vars directory will be important for us throughout the demo, as they store the configuration we want to apply, and therefore we will use them to apply changes to our network.

    After dev_deploy is completed you will see configurations correctly applied (and synchronized) to your netsim devices and NCS ones. You may check it worked fine with the same commands described in previous steps. For example, for core1:

    $ ncs-netsim cli-c core1
    
    admin connected from 127.0.0.1 using console on JGOMEZ2-M-D2KW
    core1# show running-config
    

    And...

    $ ncs_cli -C -u admin
    
    admin connected from 127.0.0.1 using console on JGOMEZ2-M-D2KW
    admin@ncs# show running-config devices device core1
    

    (Note: after you complete the rest of this demo, when you don't need the local environment anymore, you can easily delete everything by running make clean. It will shutdown netsim devices, NSO, and delete any related remnants.)

Demo overview

Our demonstration will include the following architecture and elements, to show how a completely automated CICD pipeline could be applied to a network configuration environment across a complete network, including test and production environments.

The flow will be as follows: our network operator will interact with GitLab to perform any configuration changes. Ansible and NSO will deploy those changes into a virtual test environment (with VIRL), and run automated tests (with pyATS) to verify the expected results after the change. If everything goes well, then our VCS will run the same process in the production environment to implement those changes in the real network.

Integrating that environment with the local setup we built in the previous section, results in a comprehensive architecture where the local environment uses the same tools (NSO & Ansible) as the remote one. Locally it will only do the syntax checking, and once configurations are pushed to the remote GitLab, the same set of tools will also deploy and test the proposed changes, first into a test environment and then into production.

Your GitLab Version Control Server (VCS) is ready. Please find the new infrastructure-as-code repository by pointing your browser to http://10.10.20.50/developer/cicd-3tier, and login with developer/C1sco12345. Leave that window open, as we will use it to run the demo.

The repository (or repo) stores all required files and configurations to work with during the demo. Some key elements are the following ones:

  • .gitlab-ci.yml is the pipeline definition, including all different steps to follow in the automation process
  • virl is a folder used by VIRL to define the emulated architectures (test and prod)
  • tests is a folder used by pyATS for automated testing
  • group_vars, host_vars and inventory are folders used by Ansible to automate configurations deployment

If you did not follow the optional local setup process, please clone a copy of the repository from GitLab to your local workstation (if you already did it in the previous section, please skip this step). Use this command to ensure the demo credentials are embedded in the git configuration.

$ git clone http://developer:C1sco12345@10.10.20.50/developer/cicd-3tier
$ cd cicd-3tier

You will need to edit some of the files in this local repo, so please choose your favorite editor / IDE (integrated development environment). One possible option is Visual Studio Code, but you could also just defer to using something simpler like vi or any other text editor.

First of all, please take a look at the .gitlab-ci.yml pipeline file definition.

$ cat .gitlab-ci.yml

You will see our pipeline includes the following steps:

  1. Use Ansible to validate configurations that need to be applied to NSO and network devices are syntactically correct (linting), for the three environments: dev (local), test and production.
  2. Deploy those configurations to the test environment.
  3. Run automated testing in the test environment to make sure the resulting network state is the expected one.
  4. Deploy those configurations to the production environment. In this case you will see it specifies when: manual, meaning we would like to explicitly initiate the deployment process to production. allow-failure: false means that in case of failure when deploying in production the system should automatically roll-back to the previous state.
  5. Run automated testing in the production environment to make sure the resulting network state is the expected one.

Important note: for our demonstration we will use two simulated environments: test and production. It is more convenient for us to use a simulated environment for production, but in a real-world scenario the production environment would be built by real equipment from the production network.

Let's take a look at our network configurations.

$ cd host_vars
$ ls
access1.yaml core1.yaml   core2.yaml   dist1.yaml   dist2.yaml

As you can see there is one YAML file per device in our network. Those files will be the ones you need to modify to perform changes in your network.

In a real-world scenario each network developer would have cloned this repository in their local machine, and work in their own local copy, via a specific branch. For our demo we will be one of those network developers, and propose changes from our local git repo.

For example, let's say we would like to change the OSPF router-id of our core1 router, from .1 to .101. We would have to edit core1.yaml, look for the relevant configuration line...

ospf:
    - id: 1
      network:
      - area: 0
        ip: 172.16.0.0
        mask: 0.0.0.3
      - area: 0
        ip: 172.16.0.4
        mask: 0.0.0.3
      - area: 0
        ip: 172.16.0.16
        mask: 0.0.0.3
      - area: 0
        ip: 192.168.1.1
        mask: 0.0.0.0
      router-id: 192.168.1.1

... and change that last line to the desired value.

      router-id: 192.168.1.101

Save the file.

Right now you have only modified a local text file in your workstation. And git knows about it.

$ git status
On branch master
Your branch is up to date with 'origin/master'.

Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

	modified:   core1.yaml

no changes added to commit (use "git add" and/or "git commit -a")

As long as we are happy with this change, we need to add the modified file to our next git commit.

$ git add core1.yaml
$ git commit -am "Update OSPF router-id from .1 to .101"
[master 0b24c9b] Update OSPF router-id from .1 to .101
 1 file changed, 1 insertion(+), 1 deletion(-)

Now is the time to send our configuration change to the remote repo in the VCS GitLab server.

$ git push
warning: redirecting to http://10.10.20.50/developer/cicd-3tier.git/
Counting objects: 4, done.
Delta compression using up to 12 threads.
Compressing objects: 100% (4/4), done.
Writing objects: 100% (4/4), 389 bytes | 389.00 KiB/s, done.
Total 4 (delta 3), reused 0 (delta 0)
To http://10.10.20.50/developer/cicd-3tier
   00f2b65..1b70da9  test -> test

Go back to the browser window that pointed to your GitLab repo at http://10.10.20.50/developer/cicd-3tier, and you will see the update there.

Pushing your proposed change in the new core1.yaml file will automatically start the pipeline defined in the .gitlab-ci.yml file. It is applied on the test network, and you may check its execution in real-time by clicking on the CI / CD section in the left bar. In this example we would be running pipeline #3.

As you can see the pipeline includes 3 different stages: validate, deploy_to_test and verify_deploy_to_test.

These are coming from the pipeline definition in your .gitlab-ci.yml file.

Clicking on each one of these stages will show you the specific steps followed in there:

  1. validate

This stage starts a container running Ansible and do the syntax checking of proposed configurations, including changes, in all 3 environments: dev (local), test and prod.

  1. deploy_to_test

Second stage starts a container running Ansible to sync existing configs from NSO to devices, then apply configuration changes to NSO, and finally sync again configs from NSO to devices.

  1. verify_deploy_to_test

The final stage starts a container running a pyATS image and run automated tests based on the content of tests/validation_tasks.robot and tests/test_testbed.yml. The defined set of tests includes not only reachability, but also number of expected OSPF neighbors and interfaces in each network device after the applied changes.

The whole process will take like 5 minutes, until you can see the 3 stages completed successfully in the test environment.

At that point your proposed network configuration change has been completely validated in a VIRL-simulated test environment, and you are now good to propose it to be applied in the real production network.

You can do that by requesting to merge the content of the git test branch into the git production branch.

If you go back to the pipeline section you will see there is a new pipeline there, #4. It includes the same steps as the previous one, but the main difference is that this pipeline is being applied to the production network.

As you can see the production pipeline has the same 3 stages as the one we applied previously in the test environment. However when running it, the pipeline appears as blocked before running the deploy_to_prod stage. The reason is we configured when: manual in the .gitlab-ci.yml pipeline definition file, so that we had to manually confirm we want to actually initiate the deployment in the production network. This is a configuration decision, and maybe useful if you would like to perform the actual change during a maintenance window.

In order to move forward with the pipeline we need to confirm it manually by pressing the play button.

It will automatically start deploying our configuration changes into the production network. If everything goes well, it will successfully complete this stage and move to the next one, to test the results after changes are implemented.

After 5 minutes, by the end of this process you should see the complete pipeline has been successfully executed, and your proposed changes have been tested and finally applied to the production network.

Please click here to see a recorded demo of this CICD pipeline working on a 3-tier network environment.

CONGRATULATIONS! You have completed your first NetDevOps demo on how to fully automate and test network configuration changes all the way to production!

Summary

In this NetDevOps demo you have seen a modern approach into version-controlled automated network configuration and testing. The scenario describes how multiple network operators would be able to propose configuration changes, in the same way developers do it for code: using git branches. A standard version control server provides multiple benefits, like automated pipelines, version control and tracking, rollback cababilities, etc. During the demo you have also experienced the benefits of being able to locally verify syntax for proposed changes before submitting them. Also how a simulated environment helps verifying proposed changes are correct, before applying them into the production network. Finally, the set of automated tests helps making sure proposed changes have not had unexpected results on critical business-relevant functionality. This way you have experienced end-to-end automation and testing in a scalable and error-free approach.

NetDevOps Demo 2 - VPN Head End Management Platform (HEMP)

Managing connections from extranet environments usually involves a great amount of workload, especially around VPN configurations at central hub points. One way of implementing this type of environments is pre-configuring VPN endpoints at remote locations, and then completing the required configuration from the central head-end point as connectivity is required. This configuration will explicitly define the authorized end-points and type of traffic that can traverse the connection.

Once connectivity to a certain remote location is not required anymore, you will have to remove the associated relevant configuration from the central head-end, disabling that specific VPN and hence discontinuing connectivity.

As you might guess, scaling this type of environment would really benefit from automation. The more remote locations from different 3rd-party entities (ie. partners, vendors), the longer the process to configure VPNs, ACLs with type of traffic and authorized end-points, etc. Implementing these long VPN configurations via CLI is of course a prone-to-error process due to the required human interaction, so automation will also take care of this challenge and provide the required consistency along the network.

This demonstration will focus on how to automate the lifecycle of extranet VPN connections, from setting them up to checking everything is correct, providing related metrics, and tearing them down once they are not required anymore. It also includes a simple graphical user interface (GUI) that uses APIs to demonstrate how easy it could be to manage those VPN connections for users without the required permissions to connect via CLI to network devices, or even the knowledge to configure them.

Topology

Our demo setup will include 1 central hub location with a headend router that will concentrate VPN connections from 4 remote partner locations.

We will also have some switches acting as hosts exchanging traffic, and another router simulating internet, providing connectivity between the headend and partner locations.

All devices will be simulated using VIRL as per the diagram below.

Building blocks

These are the components we will use to build the demo:

The provided GUI portal to manage HEMP uses the following technologies:

  • Python, Flask, and JavaScript for the primary web interface
  • Telegraf, InfluxDB, and Grafana for visualizing operational metrics collected via SNMP

For ease of deployment and portability, all of the above components are run as a docker compose stack which can be executed directly on your sandbox devbox.

Environment setup

Once you are connected via VPN to your reserved sandbox, please open a terminal window (ie. putty on Windows or terminal on OSX) and ssh to your devbox with the following credentials: developer/C1sco12345

$ ssh developer@10.10.20.50

Once in, and before starting the setup phase, please edit the /opt/nso/etc/ncs/ncs.conf file, delete the following line, and save the file:

<dir>/opt/nso/packages/neds/</dir>

Now you are ready to start the setup, so clone the repository that includes all required files to build the demo environment into your devbox.

[developer@devbox ~]$git clone https://github.com/DevNetSandbox/sbx_multi_ios.git

With that, your sandbox devbox includes now all required info to start building the environment.

Go into the hemp directory and run the setup.sh script to set the complete environment up.

[developer@devbox ~]$cd sbx_multi_ios/hemp
[developer@devbox hemp]$./setup.sh

setup.sh will perform the following steps in the sandbox devbox:

  1. Install required software tools and dependencies in a python virtual environment
  2. Launch VIRL simulations for the whole network, including 4 remote partner locations and 1 central hub headend
  3. Setup and start NSO
  4. Add all VIRL network devices into NSO
  5. Synchronize all existing configurations from network devices to NSO
  6. Display the status for VIRL network devices
  7. Start a HEMP management GUI, implemented with containers
  8. Use Ansible to pre-configure the headend and activate 2 out of the 4 remote locations VPNs

The process will take approximately 15 minutes, so check this out in the meanwhile.

Demo overview

Your demo architecture is now set up, and includes the following main components:

  • 1 central headend router where partner extranet VPN connections from remote devices are terminated
  • 4 remote partner routers (partner1, partner2, partner3, partner4) that represent the unmanaged side of extranet/partner VPN connections

Simulated devices connected to both, the remote partner routers and the headend one, are configured with IP SLA probes, to send interesting traffic through the VPNs and keep them active.

Every remote partner router (1 to 4) is completely configured to establish their respective VPNs. Having connectivity for each one of them will depend exclusively on having the proper configuration applied on the headend router side.

On the headend router we have already provided the required configuration to setup VPN connections towards partner1 and partner2 remote devices. The partners directory includes YAML files with all required parameters to configure the headend router and complete the VPN connections just for partner1 and partner2 remote locations (not 3 and 4).

This configuration has been provided using Ansible and associated NSO modules during step 8 of the setup phase. That step is the one that runs an Ansible playbook, described in the site.yaml file. If you go through its content, you will see that first it synchronizes the configuration from NSO to the remote devices for consistency (in case there might have been any changes configured directly on the devices they will be overwritten by this step). Then the playbook will load partner1 and partner2 YAML files into variables, and push those those to NSO as new headend router configuration to activate those specific VPNs. Finally the playbook with instruct NSO to sync that new configuration from NSO to the headend router.

However, partner3 and partner4 VPNs are pre-configured only on the partner/remote side, and will need you to provide additional configuration on the headend to complete those VPNs setup.

Instead of configuring it manually, or via YAML files and Ansible, for this demo you will be able to define the required configuration in the headend via a GUI management portal. It will allow you to provide the required parameters, and the GUI will translate them into the required information to send towards NSO north-bound APIs.

This API-based automation solution will enable you to easily apply or remove the required configuration in the headend router, without having to connect to the device via CLI and type myriads of commands.

At this point you might be wondering why NSO is part of the architecture, or if you could use Ansible to directly configure your network devices. One of the multiple benefits that NSO provides is that, although in this demo we are only using IOS XE devices, it would be easy to support a mixed environment with other types of devices / CLIs (ie. IOS XR, ASA firewall, other vendors...) without doing any modifications in the management GUI. Please remember the GUI uses NSO north-bound APIs, so it does not depend on the type of underlying infrastructure devices. NSO plays a key role by performing that translation from API requests to the information and format those devices require and support.

You may access the HEMP GUI portal by pointing your browser to http://10.10.20.50:5001

Please click on Configure VPN connections and there you will see the ones already configured on the headend router: partner1 and partner2.

You may now click on one of them, for example partner1, and the GUI will display its configuration and metrics. The system will also allow you to perform some actions on that specific VPN:

  • Check Sync: this will compare the configuration in NSO vs the one in the headend router
  • Reactivate Re-Deploy: ask NSO to sync configuration again from NSO to the headend router
  • Undeploy: remove configuration from the headend router, while conveniently keeping it in NSO in case you need to redeploy it later

Now let's go back to Configure VPN connections and click on Add VPN to start the "VPN Setup Wizard". This will allow you to provide the required information to establish the VPN connection from the headend router to partner3.

You may find below the required configuration that will be applied in the headend router, so that partner3 VPN connection is established:

partner3:
  - partner_name: partner3
    device:
      - headend
    sequence: 103
    peer_ip: 172.16.252.3
    isakmp_algo: 3des
    isakmp_group: 2
    pre_shared_key: cisco
    transform_encryption: esp-3des
    transform_auth: esp-md5-hmac
    acl_number: "101"
    acl_rule: "permit ip 192.168.0.0 0.0.0.255 192.168.3.0 0.0.0.255"

This is the sequence of steps you will need to follow in the GUI:

Once you are done with partner3 please repeat the process for the partner4 VPN connection, using the parameters below:

partner4:
  - partner_name: partner4
    device:
      - headend
    sequence: 104
    peer_ip: 172.16.252.4
    isakmp_algo: 3des
    isakmp_group: 2
    pre_shared_key: cisco
    transform_encryption: esp-3des
    transform_auth: esp-md5-hmac
    acl_number: "104"
    acl_rule: "permit ip 192.168.0.0 0.0.0.255 192.168.4.0 0.0.0.255"

By the end of the process you should have something like this in the Configure VPN connections section:

You may now click on Monitor VPN Connections and the GUI will load a Grafana dashboard. Please login there with admin/admin, and change the password. If it does not work correctly (error message Dashboard not found) you may still access the Grafana dashboard by pointing your browser directly to http://10.10.20.50:3000

Selecting the Tunnel Detail dashboard will show you information about each specific tunnel, just by choosing the peer IP address:

The Extranet Monitoring dashboard will show you all information about how the headend router is doing:

As the final step please restore the NCS configuration file we modified at the beginning of this demo, so that you can use the sandbox reservation later for other demos.

[developer@devbox hemp]$cp /opt/nso/etc/ncs/ncs.conf.bak /opt/nso/etc/ncs/ncs.conf

CONGRATULATIONS! You have now completed your second NetDevOps demo on how to leverage APIs to automate Extranet VPNs management!

Summary

This automation demo shows how you can leverage APIs to easily provision and monitor Extranet VPNs from a simple custom GUI. With this kind of approach network operators would not need to:

  • Understand network architecture details
  • Remotely connect to devices
  • Be experts on each underlying device CLI
  • Configure those devices via a myriad CLI commands

Note: it is important to remark that this automation demo is based on NSO and its capability to extend existing functionalities via service models. The primary service model for NSO can be found in the ./nso/packages/vpn directory. Service models/packages are the primary way that NSO functionality is extended. A service model is comprised of a YANG file, a set of templates, and optionally some python or java logic.

NetDevOps Demo 3 - Working with pyATS and Genie

pyATS is an Automation Test System written in Python. It provides the core infrastructure to define topologies, connect to network devices and run the required tests.

Genie builds on top of pyATS and it is fully integrated to provide model automation tests. It focuses on test cases for features (ie. BGP, HSRP, OSPF), and abstracts how this information is obtained from underlying devices.

Together, pyATS and Genie enable you to create network test cases that provide stateful validation of devices operational status. You can use them to validate how a new feature or product will affect your network, compare the status of your network before/after a change, customize your network monitoring based on your own business drivers.

The solution provides visibility on network devices health, by focusing not only on the configurational state, but also on the operational status.

It is agnostic and extensible, so any type of system could potentially be included by developing the right set of libraries.

It can be integrated into CICD pipelines (implemented via integration servers like GitLab or Jenkins), other frameworks (like Robot, for almost-natural language stateful tests definition), or even interact with ChatBots (ChatOps).

It also integrates beautifully with VIRL topologies, and we will show you how to do it so you can focus only on what you want to test in your network.

pyATS Documentation

The network topology you will use for testing is called the testbed, and it includes your devices and links. It is defined in a YAML file, and as long as pyATS is implemented in Python, everything is an object... including the testbed.

Your network devices are also objects in pyATS, so you can perform operations on them using methods, like the following:

  • connect()
  • ping(destination)
  • execute('show version')
  • configure('no ip domain lookup')

The output from these commands will be parsed into structured data, so your systems can easily extract business-relevant data from them.

0k, let's see it working.

The first thing you need to decide is how you want to run pyATS: natively in your own system, or in a Docker container.

For the first option you should use a Python 3.X virtual environment, so you don't clog your system, and then install the required tools (see this doc).

However it is easier to run it in a Docker container, as the available image includes all required software, libraries, dependencies and a ton of examples you can use to get started. So we will use containers for our demos.

The sandbox you have reserved includes a big VIRL server we will use to run some simulated devices for our demos.

It also includes a devbox with all required utilities pre-configured. At this point you could decide to use the devbox included in your sandbox to execute the demos, or rather configure your own system so you can continue using it later. If you decide to use the sandbox devbox you can connect to it by running: ssh developer@10.10.20.50, and use password C1sco12345.

In order to easily manage the VIRL server we will use a very handy utility called virlutils. You will only need to install virlutils if you decide to use your own local workstation for the demos (no need to do it if you will be using the sandbox devbox).

$ pip install virlutils

Once done, please create a VIRL init file (again, no need to do this step if you will be using the sandbox devbox)...

$ vi ~/.virlrc

... and define the required VIRL credentials:

VIRL_USERNAME=guest
VIRL_PASSWORD=guest
VIRL_HOST=10.10.20.160

Then start a new terminal window in your workstation, so that it reads the new VIRL init file configuration.

Now you should be able to search for some example pre-defined simulated topologies
that could be useful for testing (you can find some more here).

$ virl search

You may even filter those examples: ie. look for the ones including IOS in their name.

$ virl search ios
Displaying 1 Results For ios
╒════════════════════════╤═════════╤══════════════════════╕
│ Name                   │   Stars │ Description          │
╞════════════════════════╪═════════╪══════════════════════╡
│ virlfiles/2-ios-router │       0 │ hello world virlfile │
╘════════════════════════╧═════════╧══════════════════════╛

That is a simple template for a 2 IOS-routers simulation (kind of like a hello-world for virlutils).

Make sure you are connected to your sandbox VPN and then download the VIRL topology specified below, so that you can start it in your server.

$ mkdir tests
$ cd tests
$ virl pull virlfiles/genie_learning_lab
Pulling from virlfiles/genie_learning_lab
Saved topology as topology.virl
$ virl up
Creating default environment from topology.virl
Localizing {{ gateway }} with: 172.16.30.254

Now you have your VIRL simulation running in the sandbox server!

$ virl ls
Running Simulations
╒══════════════════════════╤══════════╤════════════════════════════╤═══════════╕
│ Simulation               │ Status   │ Launched                   │ Expires   │
╞══════════════════════════╪══════════╪════════════════════════════╪═══════════╡
│ netdevops_default_oAmstu │ ACTIVE   │ 2019-04-03T10:54:44.416113 │           │
╘══════════════════════════╧══════════╧════════════════════════════╧═══════════╛

You can also see the status of its included nodes.

$ virl nodes
Here is a list of all the running nodes
╒════════════╤══════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕
│ Node       │ Type     │ State   │ Reachable   │ Protocol   │ Management Address   │ External Address   │
╞════════════╪══════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡
│ csr1000v-1 │ CSR1000v │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.129        │ N/A                │
├────────────┼──────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤
│ nx-osv-1   │ NX-OSv   │ ACTIVE  │ REACHABLE   │ telnet     │ 172.16.30.130        │ N/A                │
╘════════════╧══════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛

Once a node shows up as ACTIVE and REACHABLE you can connect to it (use password cisco) with:

$ virl ssh nx-osv-1

Please note that during the connection process you will need to confirm you want to add its IP address to the list of known hosts.

One of the fantastic features that virlutils includes is that it can generate inventories to be used by other systems, using the command: virl generate [ pyats | nso | ansible ]

For our demos we will use the pyats one, so try it once that all nodes in your simulation are REACHABLE.

$ virl generate pyats -o default_testbed.yaml
Writing default_testbed.yaml

With just a single command you have now a YAML file that defines your VIRL environment as a testbed to be used by pyATS straight away!

That pyATS testbed definition file will need some variables to define the enable password and login user/password. The most convenient way to use them later is to have them stored in a file, so please go ahead and download it. And while we are at it let's download other files we will also need for our demos.

$ curl -L https://raw.githubusercontent.com/juliogomez/netdevops/master/pyats/env.list -o env.list
$ curl -L https://raw.githubusercontent.com/juliogomez/netdevops/master/pyats/1-pyats-intro.py -o 1-pyats-intro.py
$ curl -L https://raw.githubusercontent.com/juliogomez/netdevops/master/pyats/2-genie-intro.py -o 2-genie-intro.py
$ curl -L https://raw.githubusercontent.com/juliogomez/netdevops/master/pyats/initial_snapshot.robot -o initial_snapshot.robot
$ curl -L https://raw.githubusercontent.com/juliogomez/netdevops/master/pyats/compare_snapshot.robot -o compare_snapshot.robot

As the final preparation step before starting, please make sure to obtain the latest pyATS Docker image.

$ docker pull ciscotestautomation/pyats:latest

We are now READY to start our tests!

Don't do it now, but please note that by the end of our set of demos, when you are finally done with your simulation, you can easily tear it down with:

$ virl down
Removing ./.virl/default
Shutting Down Simulation netdevops_default_oAmstu.....
SUCCESS

Test a - Execute a command on a network device

The most basic demo will show you how to use pyATS to execute a single command on a certain network device. In this case you will see in your screen how this script executes a show version on a CSR1000v. Please review its content and you will see it executes the following steps:

  1. Load the required pyATS library
  2. Load the pyATS testbed definition from file
  3. Select a specific device from the testbed
  4. Connect to that device via SSH and configure the connection to be automation-friendly (disable logging, change terminal width/length, no timeout)
  5. Execute a command in that device

Run the demo with an interactive container (-it) that will be automatically deleted after execution (--rm), and pass it a mapped volume from your workstation to the container (-v $PWD:/pyats/demos/). When the container starts it will automatically execute the specified python script.

$ docker run -it --rm \
  -v $PWD:/pyats/demos/ \
  --env-file env.list \
  ciscotestautomation/pyats:latest \
  python3 /pyats/demos/1-pyats-intro.py

I know, I know... I can hear you thinking: “how is this cool?!?”. Well, basically you have been able to run a script that automatically connects to one device and executes one command on it. Nothing fancy there, I know, BUT what if you could do the same for a large list of devices? Imagine you needed to run that same command in 1,000 devices. Or maybe you had to run multiple commands in a myriad of devices. pyATS allows you to easily do it, and only requires you to provide the testbed and python script. He will take care of everything else while you go play guitar.

Let’s try something else…

Test b - Consolidate info from devices with different CLI

In this case you will use not only pyATS, but also Genie, to compile interface counters from multiple devices across the network and then check if there are any CRC errors in them.

Our python script will use the same function to compile CRC errors information from 2 different devices with different CLI (ie. CSR1000v and Nexus switch). Genie determines the platform/OS from the testbed file definition and its parsers provide independence from the underlying device type. Genie uses models to determine the specific commands and format that need to be used for each feature in each platform/OS, and how to map the outcome to the specific fields in the resulting structured data.

Please review its content and you will see the following steps to execute:

  1. Load the required pyATS and Genie libraries

  2. Define a reusable function that obtains all interface counters from a single device

    • If not connected to the device, connect to it via SSH
    • Learn info about those device interfaces to parse and return it as structured data
  3. Load the pyATS and Genie testbeds definition from file

  4. Select a specific device from the testbed

  5. Call the function defined previously to obtain all interface counters from that device

  6. Select another device, with a different CLI

  7. Call the function defined previously to obtain all interface counters from that device

  8. Merge all interface details from these 2 different devices (with different CLIs), into a single source (python dictionary)

  9. Loop through the compiled data in that single source and show CRC errors for every interface

Run the demo with an interactive container (-it) that will be automatically deleted after execution (--rm), and pass it a mapped volume from your workstation to the container (-v $PWD:/pyats/demos/). When the container starts it will automatically execute the specified python script.

$ docker run -it --rm \
  -v $PWD:/pyats/demos/ \
  --env-file env.list \
  ciscotestautomation/pyats:latest \
  python3 /pyats/demos/2-genie-intro.py

Now this is starting to get more interesting, right? Using Genie we have been able to re-use exactly the same function code to connect to devices supporting different CLIs, extract the required info from them and consolidate all that info into structured data we can now use in a programmatic way for our own specific interests.

Test c - Develop your own tests with an interactive shell

Now that you have seen a couple of simple examples of what can be done with pyATS and Genie, you might want to start developing your own tests. But instead of iterating through the process of "writing a complete script, trying to run it, failing and rewriting", we would rather have a more interactive way of developing tests. Something that allows us to check the results of each step during the test, and debug it by exploring the results at any point of the flow.

As you may have noticed pyATS feels really pythonic, so wouldn't it be great to have something similar
to the interactive Python shell? Something that would give us the option to execute individual steps interactively while developing our tests? Say no more fam, we got you covered!

Genie has a function called shell, which can be invoked from the Bash command line. When invoking shell, Genie will load the correct testbed file and initiate the required libraries for the python interactive shell.

For our demos we will start a pyATS container and ask it to start an interactive shell (bash) so we can run Genie shell in it.

$ docker run -it --rm \
  -v $PWD:/pyats/demos/ \
  --env-file env.list \
  ciscotestautomation/pyats:latest bash

You may invoke the interactive Genie Shell and use your local VIRL testbed, available via the container volume mapping, with the following command:

root@bfaa28c3faf3:/pyats# genie shell --testbed-file demos/default_testbed.yaml 

The great thing about being able to define the specific testbed to use for this test is that you can reuse everything you create in different environments (eg. production, testing, datacenter 1, datacenter 2).

You can see the devices included in your own testbed:

>>> testbed.devices
TopologyDict({'csr1000v-1': <Device csr1000v-1 at 0x7f8fa13e9438>, 'nx-osv-1': <Device nx-osv-1 at 0x7f8fa141f0f0>})

Create aliases for your devices:

>>> nx = testbed.devices['nx-osv-1']
>>> csr = testbed.devices['csr1000v-1']

You can now connect to your device (please make sure you have telnet installed in your system):

>>> csr.connect()

Ask if there are any links going csr to nx:

>>> csr.find_links(nx)
{<Link object 'flat' at 0x7fd48b490f60>, <Link object 'csr1000v-1-to-nx-osv-1#1' at 0x7fd48b490eb8>, <Link object 'csr1000v-1-to-nx-osv-1' at 0x7fd48b490d68>}

Or execute a command in it:

>>> csr.execute('show version')

Probably by now you are thinking...

... and you are right!

Let's start by exploring what can be done with genie.ops libraries. Genie Ops libraries are at the heart of parsing features on devices and returning structure data. The models are based on OpenConfig and IETF YANG models. For the full list of models please go to Genie Models

How about easily obtaining from a device the complete table of routes in a structured format?

>>> routes = csr.learn('routing')

This request will execute a number of commands in the device, compile all the received routing info and parse it into a structured format. Check the resulting dictionary:

>>> routes.info

It is structured data that you can now easily query and process in your scripting!

For example, let's say you have a tool that needs to verify that a specific route (eg. 172.16.30.0/24) exists on your Nexus switch.

>>> routes.info['vrf']['default']['address_family']['ipv4']['routes']['172.16.30.0/24']
{'route': '172.16.30.0/24', 'active': True, 'source_protocol': 'connected', 'source_protocol_codes': 'C', 'next_hop': {'outgoing_interface': {'GigabitEthernet1': {'outgoing_interface': 'GigabitEthernet1'}}}}

Wow, that was easy! Think about the kind of processing and parsing you would have had to do in the past to go through the text output of all those commands. Now pyATS is compiling the information from all those commands and giving you a consolidated, structured view that you can easily work with.

Now let's try a different task, and learn about all-things BGP in the csr device:

>>> bgp = csr.learn('bgp')

Again, this task will run multiple BGP-related commands, iterating through all detected BGP neighbors, and provide you with a consolidated view that includes all relevant information in a structured format, so you can easily extract and process the specific data you require.

>>> bgp.info

Now let's explore what can be done with genie.conf libraries.

For example, in order to work with BGP configurations we need to import the required library:

>>> from genie.libs.conf.bgp import Bgp

And then we could use it to learn the BGP configuration in our Nexus switch:

>>> nx.connect()
>>> bgps_nx = Bgp.learn_config(nx)

As long as for other routing protocols (not BGP) there might be several instances we receive a list, and we need to refer to its first entry, numbered 0:

>>> bgp_nx = bgps_nx[0]

We can also apply configurations, like this or a different one, to our device:

>>> bgp_nx.build_config()

Or remove all BGP configuration:

>>> bgp_nx.build_unconfig()

You can check it's all gone with the same command we used in the genie.ops section:

>>> bgp = nx.learn('bgp')
>>> bgp.info
{}

And easily apply all BGP configuration back again:

>>> bgp_nx.build_config()

When you are done exploring Genie interactive shell, you can exit with:

>>> exit()
root@bfaa28c3faf3:/pyats# exit

Genie shell makes it really easy for you to develop and debug your tests step-by-step, in the classic pythonic way!

Test d - Profiling your network for troubleshooting

Now let's say you are responsible for a network and could use some help on how to be updated about possible issues happening in it. Wouldn't it be great to have a tool that helps you profile the network end-to-end and store that info as snapshots?

Let's focus, for example, on profiling everything related to BGP, OSPF, interfaces and the platforms in your network, and saving it to snapshot files. Ideally you would take a first snapshot of your network when everything is working superb.

Genie can help you do it with a simple command, specifying what features you want to learn (ospf interface bgp platform), from what specific testbed (--testbed-file default_testbed.yaml), and the directory where you want to store the resulting files (--output good):

$ docker run -it --rm \
  -v $PWD:/pyats/demos/ \
  --env-file env.list \
  ciscotestautomation/pyats:latest-alpine ash
(pyats) /pyats# cd demos
(pyats) /pyats/demos # genie learn ospf interface bgp platform --testbed-file default_testbed.yaml --output good

Inside the created good directory, console files will show you what commands were run to obtain all required info, while ops files will store the resulting information in structured format.

Now let's simulate something terrible happened in your network... by shutting down one of the loopback interfaces in your CSR1000v router. Well, it's not that terrible, but you get the idea as an example of what could have happened.

First you need to identify the IP address of that CSR1000v, so you can connect to it:

(pyats) /pyats/demos # cat default_testbed.yaml | grep -A 1 GigabitEthernet1:
      GigabitEthernet1:
        ipv4: 172.16.30.129/24

Now you can SSH to it with password cisco (accept it being added to your list of known hosts):

(pyats) /pyats/demos # ssh cisco@172.16.30.129

Once inside the system please shutdown interface loopback 1, to simulate that terrible catastrophe in your network:

csr1000v-1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
csr1000v-1(config)#int lo 1
csr1000v-1(config-if)#shut
csr1000v-1(config-if)#exit
csr1000v-1(config)#exit
csr1000v-1#exit
Connection to 172.16.30.129 closed by remote host.
Connection to 172.16.30.129 closed.

In the real world, soon you would be receiving calls from users: "Something is wrong... terribly wrong", "I lost ALL connectivity", "My database stopped working!". So instead of starting to troubleshoot by brute force, how about asking Genie to determine what is the current new status of the network after the outage. And even better, what changed exactly since the last time you took the snapshot of the network in good state?

Let's do this by running the same command as previously, but this time asking the system to store the resulting files in a different directory (--output bad).

(pyats) /pyats/demos # genie learn ospf interface bgp platform --testbed-file default_testbed.yaml --output bad

And now find out what changed between the good situation and the bad one with yet another simple command.

(pyats) /pyats/demos # genie diff good bad
1it [00:00,  5.96it/s]
+==============================================================================+
| Genie Diff Summary between directories good/ and bad/                        |
+==============================================================================+
|  File: ospf_iosxe_csr1000v-1_ops.txt                                         |
|   - Identical                                                                |
|------------------------------------------------------------------------------|
|  File: platform_nxos_nx-osv-1_ops.txt                                        |
|   - Identical                                                                |
|------------------------------------------------------------------------------|
|  File: interface_iosxe_csr1000v-1_ops.txt                                    |
|   - Diff can be found at ./diff_interface_iosxe_csr1000v-1_ops.txt           |
|------------------------------------------------------------------------------|
|  File: bgp_nxos_nx-osv-1_ops.txt                                             |
|   - Diff can be found at ./diff_bgp_nxos_nx-osv-1_ops.txt                    |
|------------------------------------------------------------------------------|
|  File: ospf_nxos_nx-osv-1_ops.txt                                            |
|   - Identical                                                                |
|------------------------------------------------------------------------------|
|  File: bgp_iosxe_csr1000v-1_ops.txt                                          |
|   - Diff can be found at ./diff_bgp_iosxe_csr1000v-1_ops.txt                 |
|------------------------------------------------------------------------------|
|  File: platform_iosxe_csr1000v-1_ops.txt                                     |
|   - Identical                                                                |
|------------------------------------------------------------------------------|
|  File: interface_nxos_nx-osv-1_ops.txt                                       |
|   - Identical                                                                |
|------------------------------------------------------------------------------|

As you can see the system generates some files that signal exactly what has changed from the good situation to the bad one. In this specific case, one of the files immediately shows that interface Loopback 1 in the CSR1000v has been disabled!

(pyats) /pyats/demos # cat ./diff_interface_iosxe_csr1000v-1_ops.txt
--- learnt/interface_iosxe_csr1000v-1_ops.txt
+++ bad/interface_iosxe_csr1000v-1_ops.txt
info:
 Loopback1:
...
+  enabled: False
-  enabled: True
+  oper_status: down
-  oper_status: up

Talk about an easy way to determine why your network is not working properly as before, and to find out what happened exactly!

But we could do better... there's always room for improvement, right? Probably you have noticed that the output from genie commands is easier to understand than the one for the original pyats commands. But still it was a lot for just a couple of devices. Just think if we wanted to run that same test in the complete network with maybe hundreds or thousands of systems... that would be a lot of logging info! However as an operator probably I don't need that much output, and I could use a more intuitive summary that gives me the key info on what I am doing.

Besides this, network operators are probably interested in defining their tests in a way that is as close to natural language as possible. Robot framework is an open-source automation framework for testing that can help you with these challenges. Let's take a look at an example on what can be done with it.

We will run the same scenario as before, and see what are some of the benefits we get with Robot. So again, we will take a first snapshot of our network when it is working fine.

Before we start, please go to your CSR and get interface Loopback 1 back up again, so that the network is tidy and clean, as it was in the beginning.

(pyats) /pyats/demos # ssh cisco@172.16.30.129
csr1000v-1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
csr1000v-1(config)#int lo 1
csr1000v-1(config-if)#no shut
csr1000v-1(config-if)#exit
csr1000v-1(config)#exit
csr1000v-1#exit
Connection to 172.16.30.129 closed by remote host.
Connection to 172.16.30.129 closed.

Everything is now back to the normal initial situation.

Now, instead of running the Genie profiling command directly from the CLI, with Robot we will use the initial_snapshot.robot test definition file. This file specifies the libraries to import, where the testbed file resides, and the test cases definition. Please review this file and you will see the different steps in these test cases are defined with very simple language.

First it will connect to the testbed devices:

Connect
    # Initializes the pyATS/Genie Testbed
    use genie testbed "${testbed}"

    # Connect to both devices
    connect to device "nx-osv-1"
    connect to device "csr1000v-1"

And then the system will profile them, specifiying where to store the resulting network profile snapshot files:

Profile the devices
    Profile the system for "bgp;config;interface;platform;ospf;arp;routing;vrf;vlan" on devices "nx-osv-1;csr1000v-1" as "./good/good_snapshot"

Very simple and natural language that helps understanding intuitively what the test case is supposed to do.

Let's run robot with a single command that simply specifies the directory where we want to store the resulting log, output and report (-d good):

(pyats) /pyats/demos # robot -d good initial_snapshot.robot
==============================================================================
Initial Snapshot
==============================================================================
[ WARN ] Could not load the Datafile correctly
Connect                                                               | PASS |
------------------------------------------------------------------------------
Profile the devices                                                   | PASS |
------------------------------------------------------------------------------
Initial Snapshot                                                      | PASS |
2 critical tests, 2 passed, 0 failed
2 tests total, 2 passed, 0 failed
==============================================================================
Output:  /pyats/demos/good/output.xml
Log:     /pyats/demos/good/log.html
Report:  /pyats/demos/good/report.html
(pyats) /pyats/demos #

As you can see now the output an operator would get when executing the test case, is much more summarized. It clearly specifies, in one line per step, if the test passed or not and where you can find the resulting report, output and log files. These are extremely useful to easily visualize from a browser how did the tests go, drill down into each specific test and examine the logs about what happened exactly. In this case we have decided to store these files in the same directory where we keep the profiling snapshots.

The good directory now stores everything about your network profile when things work fine. Let's mess it up again, by connecting to the system and shutting down interface Loopback 1.

(pyats) /pyats/demos # cat default_testbed.yaml | grep -A 1 GigabitEthernet1:
(pyats) /pyats/demos # ssh cisco@172.16.30.129
csr1000v-1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
csr1000v-1(config)#int lo 1
csr1000v-1(config-if)#shut
csr1000v-1(config-if)#exit
csr1000v-1(config)#exit
csr1000v-1#exit
Connection to 172.16.30.129 closed by remote host.
Connection to 172.16.30.129 closed.

After this terrible happening it is time to profile the network again, but this time we will use the compare_snapshot.robot file to run another test case, a little bit different from the initial one. In this case it will include one extra step: once it is connected to the devices and has profiled them as before, it will automatically compare the new snapshots with the old good ones.

Compare snapshots
    Compare profile "./good/good_snapshot" with "./fail/failed_snapshot" on devices "nx-osv-1;csr1000v-1"

Again, very simple and natural language that helps understanding intuitively what the test case is supposed to do.

(pyats) /pyats/demos # robot -d fail compare_snapshot.robot

As you will see from the output the first 2 steps work fine: it connects to the devices and profiles them just fine. However, when it goes into step number 3 it fails, indicating that something has changed from the previous good situation. Going further down the log it clearly states the CSR interface has actually been shutdown and it is not operational anymore, compared to the initial good state. Wow, that was easy to debug!

Comparison between ./good/good_snapshot and ./fail/failed_snapshot is different for feature 'config' for device:

'csr1000v-1'
interface Loopback1
+ shutdown

**********
Comparison between ./good/good_snapshot and ./fail/failed_snapshot is different for feature 'interface' for device:

'csr1000v-1'
info:
 Loopback1:
+  enabled: False
-  enabled: True
+  oper_status: down
-  oper_status: up

In summary, using Robot we have been able to define the desired test case using very intuitive and natural language for the desired profiling. The resulting outcome is also very clear when debugging possible network issues and even offer HTML reporting that you can easily consume and share. Really awesome tool!

If you want to learn more about how Genie network profiling can help you manage and debug issues in your network, please check this fantastic lab and also this one. Both offer you the option to run them on mocked devices, so you don't actually need a reserved sandbox environment... how cool is that?

Test e - Working with Test Cases

Now that you know how to run some basic tests with pyATS and Genie, it is time to explore how we could give it a proper structure to build more complex tests. That's what Test Cases are all about: a framework that allows you to build repeatable and more sophisticated testing processes.

Let's take a look at this example:

Task-1: basic_example_script
|-- commonSetup                                                           
|   |-- sample_subsection_1                                               
|   `-- sample_subsection_2                                               
|-- tc_one
|   |-- prepare_testcase                                                  
|   |-- simple_test_1                                                     
|   |-- simple_test_2                                                     
|   `-- clean_testcase                                                    
`-- commonCleanup                                                         
`-- clean_everything

The sections are easy to understand:

  • You can define a number of tasks to run in your test case (in the example above we have just 1 task)
  • Then you will have some common setup to do, structured in subsections
  • After that, you would go into the real Test Case (tc), with 3 phases: preparation, execution and cleaning
  • Finally, as a good citizen, you would need to clean after yourself, everything you set up during the common setup phase

Let's see it working in your own setup. In this case we will use the -alpine image because it has vi already included in it, and you will need it to edit some files during this demo. We will ask our pyATS container to provide a shell (ash for -alpine image) so we can work with it interactively.

$ docker run -it --rm \
  -v $PWD:/pyats/demos/ \
  ciscotestautomation/pyats:latest-alpine ash

Once inside the container shell you have access to its directory structure and tools. Inside the pyats directory you will find multiple examples and templates to use with pyATS. To get started let's focus on a basic one.

(pyats) /pyats # cd examples/basic

There you will find the basic_example_script.py python script file that defines a very simple Test Case. It includes quite some python code for all the sections mentioned before, but actually not doing much (in fact only logging), so it is a good starting point as a template to develop your own test cases.

(pyats) /pyats/examples/basic# cat basic_example_script.py

This script will be executed from a job, defined in this file:

(pyats) /pyats/examples/basic# cat job/basic_example_job.py

You would run the job with:

(pyats) /pyats/examples/basic# pyats run job job/basic_example_job.py

You can see in the report shown at the end of the execution process that all tests in our task PASSED.

Let's insert a simple verification test in our test case. Please edit the python script with vi basic_example_script.py, scroll down to the TESTCASES SECTION and look for the First test section. There you need to insert the required code as per the following:

    # First test section
    @ aetest.test
    def simple_test_1(self):
        """ Sample test section. Only print """
        log.info("First test section ")
        self.a = 1
        self.b = 2
        if self.a != self.b:
            self.failed("{} is not {}".format(self.a, self.b))

As you can see we are defining 2 simple variables with fixed values of 1 and 2, and then inserting a conditional statement that fails if they are different. So, obviously the test will now fail because 1 and 2 are different.

Save the file and try it.

(pyats) /pyats/examples/basic# pyats run job job/basic_example_job.py

Check the execution logs and you will find how a failed test looks like when executing a test case:

...
2019-04-04T08:32:09: %AETEST-INFO: Starting section simple_test_1
2019-04-04T08:32:09: %SCRIPT-INFO: First test section
2019-04-04T08:32:09: %AETEST-ERROR: Failed reason: 1 is not 2
2019-04-04T08:32:09: %AETEST-INFO: The result of section simple_test_1 is => FAILED
...
2019-04-04T08:32:09: %EASYPY-INFO: +------------------------------------------------------------------------------+
2019-04-04T08:32:09: %EASYPY-INFO: |                             Task Result Summary                              |
2019-04-04T08:32:09: %EASYPY-INFO: +------------------------------------------------------------------------------+
2019-04-04T08:32:09: %EASYPY-INFO: Task-1: basic_example_script.commonSetup                                  PASSED
2019-04-04T08:32:09: %EASYPY-INFO: Task-1: basic_example_script.tc_one                                       FAILED
2019-04-04T08:32:09: %EASYPY-INFO: Task-1: basic_example_script.commonCleanup                                PASSED
2019-04-04T08:32:09: %EASYPY-INFO: +------------------------------------------------------------------------------+
2019-04-04T08:32:09: %EASYPY-INFO: |                             Task Result Details                              |
2019-04-04T08:32:09: %EASYPY-INFO: +------------------------------------------------------------------------------+
2019-04-04T08:32:09: %EASYPY-INFO: Task-1: basic_example_script
2019-04-04T08:32:09: %EASYPY-INFO: |-- commonSetup                                                           PASSED
2019-04-04T08:32:09: %EASYPY-INFO: |   |-- sample_subsection_1                                               PASSED
2019-04-04T08:32:09: %EASYPY-INFO: |   `-- sample_subsection_2                                               PASSED
2019-04-04T08:32:09: %EASYPY-INFO: |-- tc_one                                                                FAILED
2019-04-04T08:32:09: %EASYPY-INFO: |   |-- prepare_testcase                                                  PASSED
2019-04-04T08:32:09: %EASYPY-INFO: |   |-- simple_test_1                                                     FAILED
2019-04-04T08:32:09: %EASYPY-INFO: |   |-- simple_test_2                                                     PASSED
2019-04-04T08:32:09: %EASYPY-INFO: |   `-- clean_testcase                                                    PASSED
2019-04-04T08:32:09: %EASYPY-INFO: `-- commonCleanup                                                         PASSED
2019-04-04T08:32:09: %EASYPY-INFO:     `-- clean_everything                                                  PASSED

As you can see you don't need to be a Python expert to use the test cases framework. You have templates readily available for you, where you can insert the specific tests you would like to run and execute them straight away.

Test f - Check all BGP neighbors are established

We will now explore another example that will help you check all BGP neighbors in your network are in the desired established state.

The test case structure includes the following sections:

  • Common setup: connect to all devices included in your testbed.
  • Test cases: learn about all BGP sessions in each device, check their status and build a table to represent that info. If there are neighbors not in a established state the test will fail and signal this condition in an error message.

In order to run it first you will need to install git on your pyATS container, clone a repo with additional examples, install a tool to create nice text tables (tabulate), go into the directory and execute the job:

(pyats) /pyats/examples/basic# cd ../..
(pyats) /pyats # apk add --no-cache git
(pyats) /pyats # git clone https://github.com/kecorbin/pyats-network-checks.git
(pyats) /pyats # pip3 install tabulate
(pyats) /pyats # cd pyats-network-checks/bgp_adjacencies
(pyats) /pyats/pyats-network-checks/bgp_adjacencies # pyats run job BGP_check_job.py --testbed-file /pyats/demos/default_testbed.yaml

As a result you will find the following table in your logs, displaying all BGP neighbors in all your devices, and their current status:

2019-04-05T18:10:41: %SCRIPT-INFO: | Device     | Peer     | State       | Pass/Fail   |
2019-04-05T18:10:41: %SCRIPT-INFO: |------------+----------+-------------+-------------|
2019-04-05T18:10:41: %SCRIPT-INFO: | csr1000v-1 | 10.2.2.2 | established | Passed      |
2019-04-05T18:10:41: %SCRIPT-INFO: | nx-osv-1   | 10.1.1.1 | established | Passed      |

It was never this easy to make sure BGP neighbors across your network are properly established!

NetDevOps Demo 4 - ChatOps is the way

Getting started with ChatOps

We like robots because we can offload repetitive & tedious tasks to them and they will be happy about it! Well, maybe happy is not the right word... let's say they'll do what we need 'em to do and not get bored in the process.

These robots, or bots for short, might offer different ways to interact with them. We, as humans, normally interact with machines using our fingers as the output interface when typing a request in a keyboard, and our eyes as the input interface when reading in a screen what is the outcome of that request.

Those requests we type might be formatted in 3 different ways:

  1. Using our bot's native language, but we'll need time to learn it
  2. Using our own native (natural) language and have some logic map what we mean to the bot's native language
  3. Something in-between, an easy-to-use and intuitive, but structured, way to interact with our bot

No matter what option we decide to use, the final goal will be the same: to have our bot receive requests and translate them into whatever underlying logic is required to interact with relevant infrastructure to perform them. The easiest way to get started is to go with option #3 and leverage bots to interact with whatever platform APIs we work with.

But what application can we use to communicate with our bot? It might be using SSH to a remote system from a terminal window, sending an SMS or an e-mail message, or even a proprietary app in your mobile terminal. But how convenient would it be to talk to the bot using the same messaging app we use to communicate with our colleagues at work? For example Cisco Webex.

Operating infrastructure systems with bots via messaging applications is called ChatOps.

Webex basics

Let's start with the basics: working with Webex means you'll use a local interface (laptop/mobile app or web interface) to communicate via Internet with Webex Cloud services, sending messages back and forth. This will allow you communicate with other Webex users connected in a similar way.

Time to create our first bot! Login to developer.webex.com, create a new bot, give it a name (ie. Alfred), a username (needs to be unique, ie. julio_bot@webex.bot), an icon, write any meaningful description (ie. my first bot) and click on Add bot. Congrats, you have just created your first bot! It resides in Webex Cloud services.

But wait a moment... how is it possible? What will it do if we have not created any logic? Hmmm... something seems off here, right? Well, the bot exists but it cannot do anything yet.

For now please save the Bot access token somewhere safe, as this will be needed later on and there's no way to recover it once you browse away.

Bot logic

Time to take a look at the code required to implement your bot logic. We will be using Python and Flask as they offer a simple and convenient approach you can easily leverage.

Please make sure to install Python and also the Flask library (pip install Flask). Then you are ready to review the code for our first stab at implementing the required bot logic, available here.

As you'll see from the content of the file it does the following simple steps:

  • Imports the required Flask modules
  • Defines TCP port 5005 in your computer where it will listen for incoming POST messages
  • Assigns the received JSON payload into a data variable and displays it on screen

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./chatops/code), otherwise please create a new file in your computer with the same content)

Run the code with:

python 1_chatbot.py

You'll notice the terminal window displays the following and does not allow you interact anymore:

 * Serving Flask app "1_chatbot" (lazy loading)
 * Environment: production
   WARNING: This is a development server. Do not use it in a production deployment.
   Use a production WSGI server instead.
 * Debug mode: on
 * Running on http://0.0.0.0:5005/ (Press CTRL+C to quit)
 * Restarting with stat
 * Debugger is active!
 * Debugger PIN: 180-970-440

This means your code is running and waiting for messages to arrive to port 5005. Leave this terminal window running the code and open a new one to continue working.

Connectivity and webhooks

Now we would need to tell the bot when and how we want it to contact its bot logic. This means defining the events or messages that will trigger the bot to send a notification message to its bot logic. The way to implement this is by configuring a webhook. Webhooks define the specific event types that will trigger a message, and what is the destination address (target URL) where those messages should be sent to. But wait... what might be the destination address of the bot logic that resides in your computer?!?

The bot logic running in your own computer will have to be reachable from Webex Cloud, where the bot resides. So how do we accomplish that? Your computer usually resides behind a NAT/PAT-enabled router and/or firewall, that makes your system virtually unreachable for inbound connections initiated from the Internet.

There are different workarounds you may use to solve this inbound reachability challenge (ie. mapping IP + port in your home router, or a reverse SSH tunnel) but for simplicity we will use a service called ngrok.

This way you will be able to tell your Webex bot the publicly reachable destination address it can use to reach the bot logic hosted locally in your computer.

Please download and install the ngrok client in your computer. In order to fire it up you will need to define the port in your computer where the bot logic will listen for messages coming from the Webex bot, so let's use port 5005 for that. Configuring ngrok to provide connectivity to your local port 5005 is as simple as running:

ngrok http 5005

Please wait until Session status is online and write down the https URL displayed as Forwarding and ending with .ngrok.io (ie. https://f21570cefdf4.ngrok.io). That URL is the publicly accessible address reachable through Internet for your Webex bot to access the bot logic (python script) you have running in your computer.

Now is the time to let your Webex bot know what events we are interested in, and the publicly accessible address where the bot logic resides so it can send notifications there when a new event occurs. We use webhooks for this.

Webex APIs provide an easy way for you to configure a webhook by sending a simple HTTP message using the REST POST method. You can use the command below, where you will need to include the token obtained when you created the Webex bot and the ngrok URL you just got.

curl -X POST \
  https://webexapis.com/v1/webhooks \
  -H 'Authorization: Bearer <your_bot_token>' \
  -H 'Content-Type: application/json' \
  -d '{
      "name": "Webhook to ChatBot",
      "resource": "all",
      "event": "all",
      "targetUrl": "<your_ngrok_url>"
    }'    

Everything is ready now!

By now you should have at least a couple of terminal windows: one running your python script with the bot logic and another one running the ngrok client.

Please go to your favourite Webex client interface (app, web-based, mobile) and look for the address of your bot, the one that ended with @webex.bot. Send it a message that says "HELLO BOT!" and go back to your terminal windows. The one running ngrok should display an HTTP request with the POST method and a 200 OK answer. The HTTP 200 OK success status response code indicates that the request has succeeded.

The other terminal window running your bot logic will display a JSON payload with all the information received from the Webex bot and associated to the message you sent to the bot. There you'll find for example your own address as personEmail, the name of the webhook generating this message and its target URL. However you will not find the "HELLO BOT!" message anywhere... strange, huh?

Please call for details

The reason is that webhooks only notify an event happened (in this case receiving a message) but not the details about that event (in this case the content of the received message). If you want those details you need to make a new call to the API and explicitly ask about the details for that specific event. In this case for that new call you will need the message id so you can use it to retrieve all details about that specific message. Let's see how you can obtain the text of the received message.

Before working on the new code please go to the terminal window where you are running your python code (the bot logic) and interrupt it with Ctrl+C. In that same window we'll run the new code so no need to close it.

Please review the python code required to extract the text of the received message, available here.

As you'll see from the content of the file it does the following on top of what the previous one did:

  • Import the requests library
  • Define the Webex API base URL to use it later
  • Define the bot token as API key to use it later (it's not recommended to include your bot API key in the code, but let's do it like this for now to make things simpler)
  • Define the required headers to include when using the requests library to get the message details
  • Extract the message id
  • Build the specific URL where message details for that specific message id can be found
  • Send an HTTP request to that URL, massage the response and extract the text of the message

Before running the code please make sure to edit the file and assign your bot token to the api_key variable.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go back to your bot logic terminal window, stop the previous execution with Ctrl+C, and run the code with:

python 2_chatbot.py

You'll notice the terminal window displays something similar to what appeared last time. Leave it there and test it the same way as before, by sending a message in Webex to your bot. When you do it you will see the content of the message showing up in the terminal window.

0k, so what's happening? Well, you are using your Webex interface to send a message to a bot that resides in the Webex cloud and that bot is then notifying the code running in your laptop (the bot logic) about the new received message. Your bot code is then asking the Webex cloud API for further details about that specific message, extracting the text of the message from the received response and displaying it in your terminal. Cool, huh?

Why don't you answer my messages?

The next step would be to have our bot answer our messages, so let's start with the basics. We will program it to answer with the content of the message we sent it. If we send him a "Hello dear bot!" message we'd like it to answer us with a "You said: Hello dear bot!".

We should examine the API format to send a message, available here. You will notice that, in order to be able to send a message, our bot needs to specify a room id. To answer us, it should use the id of the room where it received our initial message. That room id can be found in the data received from the webhook notification, so we'll extract it from there.

Then we build our answer message and the JSON dictionary with the two required parameters: room_id and answer message. With that and Webex REST API URL it's time to use the requests library to send a POST message to the specified URL, with the defined headers and the data about the room_id and answer message.

All of this is implemented here, please review it.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go back to your bot logic terminal window, stop the previous execution with Ctrl+C, and run the code with:

python 3_chatbot.py

As usual leave that terminal window there and test it the same way as before, by sending a message in Webex to your bot (something like hello dear bot). When you do it you will see the bot answering with the content of your message (something like You said: "hello dear bot"). Success! Or not...? Take a look at what happens next:

You said: "hello dear bot"
You said: "You said: "hello dear bot""
You said: "You said: "You said: "hello dear bot"""
You said: "You said: "You said: "You said: "hello dear bot""""
You said: "You said: "You said: "You said: "You said: "hello dear bot"""""
You said: "You said: "You said: "You said: "You said: "You said: "hello dear bot""""""
You said: "You said: "You said: "You said: "You said: "You said: "You said: "hello dear bot"""""""
You said: "You said: "You said: "You said: "You said: "You said: "You said: "You said: "hello dear bot""""""""
You said: "You said: "You said: "You said: "You said: "You said: "You said: "You said: "You said: "hello dear bot"""""""""
...
...
(ad infinitum)

... your bot got into a neverending loop, but why?!?

Before anything else let's save your bot (it deserves to be freed from this): go to your terminal window and stop the python script (bot logic) execution with Ctrl+C. You'll see the loop stops.

Now that your bot is safe let's examine what happened. Looking at the messages it seems like everytime the bot sent you a message it was coming back to it and being processed again, causing the infinite loop.

The problem comes from the fact that the webhook we configured notifies the bot logic about any new message in a room where it is a member. The moment the bot posts a new message that will also trigger a webhook notification to itself, with the subsequent processing.

So we need to find a way for the bot logic to ignore its own messages. The best way to do it is to take a look at who is the sender for any new message, and filter out the ones where the sender is the bot itself.

Your bot can find information about itself using this API call to extract its own id. With that info, you can filter all webhook notifications that come from messages posted by the bot itself, using a simple if-else statement.

You may check the code with this fix implemented here.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go back to your bot logic terminal window, stop the previous execution with Ctrl+C, and run the code with:

python 4_chatbot.py

The loop is fixed... now it works perfectly!

Let's review what we have learned until now:

  • How to configure a webhook to have Webex notify our bot logic about new messages
  • How to retrieve all details about a new message, including its text content
  • How to answer back to the user
  • How to ignore our bot's messages and avoid processing them

We've gone a long way, but now we need to make our bot useful. Let's explore how we can make it perform a specific task upon receiving a message from us.

Chuck Norris jokes and other useful APIs

Who doesn't like Chuck Norris? And who doesn't like jokes? We definitely need our bot to tell us Chuck Norris jokes! Luckily enough there is an API for that (wha...?!?) and we are going to use it in our bot logic.

On top of what we had already implemented we'll add an if-else statement to check if the received message is a /chuck command:

  • If it is a /chuck command we will send an HTTP GET to the Chuck Norris jokes API asking for a new random joke
  • Else we will do the same as before, and echo the received message

As simple as that. Please check the code with this new feature implemented here.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go back to your bot logic terminal window, stop the previous execution with Ctrl+C, and run the code with:

python 5_chatbot.py

Working fine! Now let's add a parameter to our message that specifies what specific jokes we are interested in. You can check the complete list of categories here, but for this exercise we can use just a couple of them: sport and travel. This way we can ask our bot for jokes on a specific topic just by typing /chuck sport or /chuck travel.

In order to implement this new feature we just need to use the split method to extract the parameter after /chuck. That parameter will be in the second position (number 1, as the first position is number 0) and we will use it as a parameter for the API URL where we'll send the HTTP GET.

Easy peasy! Please check the code with this new feature implemented here.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go back to your bot logic terminal window, stop the previous execution with Ctrl+C, and run the code with:

python 6_chatbot.py

As long as it's really difficult to refrain yourself from spending 3 hours enjoying Chuck Norris jokes, we will need to ask our bot to use something different and useful... how about the Meraki API?

Integration with Meraki API

Let's say we want to create a chatbot that tells users what are the Meraki networks they have. If you are familiar with Meraki probably you know it has a certain hierarchy where your user belongs to a certain organization, and that organization manages a number of networks. So if you want to list your networks first you need to know what organization you belong to.

Before reviewing the code you might remember I mentioned previously it is not recommended to include your API key in the code. Now that we are about to start working with the Meraki API let's explore how to do some things in a different way:

  1. Instead of including the Meraki API key in our code we'll do it properly and define it as an environment variable
  2. Instead of using native calls to the API, we'll try the meraki library and see how it simplifies management

For the first one about the API key you will have to enable the API from your Meraki dashboard. You just need to login and go to "Organization" - "Settings" - "Dashboard API access" and click on "Enable access to the Cisco Meraki Dashboard API". Once done go to your profile and "Generate new API key". Same as with the bot key, please write it down (copy/paste) somewhere safe, as once you close this window you won't be able to recover it.

With that now you need to create the required environment variable in the same terminal window from where you will run your python code (bot logic) later:

export MERAKI_DASHBOARD_API_KEY=<your_meraki_api_key>

Nice! Time to take a look at the code, this is what you'll see on top of what it was doing previously (I've removed the Chuck Norris jokes code for the sake of clarity):

  • Import the meraki library
  • Instantiate the dashboard API with your API key
  • Define what to do if the command is /meraki
  • Define what to do if the command action is networks (so the overall message to send the bot is /meraki networks)
    • Extract the organization id (first position in the list, numbered with 0)
    • Extract a list of all networks under that organization id
    • Build the answer message the bot will send to the user with info about the networks

Please check the code with this new feature implemented here.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go to your bot logic terminal window, where you defined the Meraki API key environment variable, and run the code with:

python 7_chatbot.py

Test it by sending your bot a message like this: /meraki networks, and you will see it answers with the complete list of networks that belong to your organization. Superb!

Now we can implement an additional command action that displays the SSIDs available for our first network, by adding an elif statement for the new ssids action. The code included there will extract the id of the first listed network (position 0) and use it to get the complete list of SSIDs under that network. With that it will build the formatted answer message to display the required info. And while we're at it, we'll make this ssids action the default one in case you just send the bot a message with /meraki.

Please check the code with this new feature implemented here.

(note: if you cloned this repo you'll be able to go to the directory where this file resides (cd ./code/chatops), otherwise please create a new file in your computer with the same content)

Go to your bot logic terminal window, where you defined the Meraki API key environment variable, stop the running code for the previous version with Ctrl+C, and run the new code with:

python 8_chatbot.py

Test it by sending your bot a message like this: /meraki ssids, and you will see it answers with the complete list of SSIDs that belong to the first network in your organization. You can also test that you get the same result when typing just /meraki, as we have defined the ssids action as the default one if nothing is specified.

Well done!

As you can see this is an easy way to implement different actions based on pre-defined commands that let you interact easily with your bot.


Author

License

This project is licensed under the MIT License - see the LICENSE.md file for details

Acknowledgements

Many thanks to the following programmability and NetDevOps gurus for their contributions and source materials that helped building this document:

  • Kevin Corbin
  • Hank Preston
  • Chris Lunsford
  • Jason Gooley
  • Gabi Zapodeanu
  • Jean-Benoit Aubin
View code on GitHub

Code Exchange Community

Get help, share code, and collaborate with other developers in the Code Exchange community.View Community
Disclaimer:
Cisco provides Code Exchange for convenience and informational purposes only, with no support of any kind. This page contains information and links from third-party websites that are governed by their own separate terms. Reference to a project or contributor on this page does not imply any affiliation with or endorsement by Cisco.