| Add Host to Distributed Virtual Switch |
Virtualization |
Add host to distributed virtual switch. Requires datacenter, host, distributed virtual switch and physical adapter as inputs. On successful execution, datacenter, host, distributed virtual switch and physical adapter are generated as outputs. |
VmwareVcenter |
| Add Host to Distributed Virtual Switch |
Virtualization |
Task to add host to distributed virtual switch |
VmwareVcenter |
| Add Host to FlashArray Host Group |
Virtualization |
Add Host to FlashArray host group. |
PureStorageFlashArray |
| Add Host to FlashArray Host Group |
Virtualization |
Add Host to FlashArray host group. |
PureStorageFlashArray |
| Add Host to Storage Host Group |
Storage |
Add a single host to a host group with host name and host group name as inputs. On successful execution, task generates host group name and the list of hosts in the host group as outputs. The specified host and host group must already exist. Task will fail if the host is already present in the host group. |
PureStorageFlashArray |
| Add Hosts to FlashArray Host Group |
Storage |
Add Host(s) member to FlashArray host group. |
PureStorageFlashArray |
| Add Hosts to FlashArray Host Group |
Storage |
Add Host(s) member to FlashArray host group. |
PureStorageFlashArray |
| Add Hosts to Storage Host Group |
Storage |
Add host members to host group with a list of host names, and host group name as input. The host group name, and the list of hosts associated with the host group are outputs of this task. All hosts in the list and the host group must already exist. |
PureStorageFlashArray |
| Add MDS Port to Port Channel |
Networking |
Add a port to a port channel on a MDS switch. |
MDSDevice |
| Add NX VLAN to Trunk or Access Port |
Networking |
Adds a VLAN to a trunk or an access port on a Nexus switch. |
NexusDevice |
| Add NetApp Export Policy to Volume |
Networking |
This is a task to add an export policy to an existing NetApp volume. |
NetAppActiveIqUnifiedManager |
| Add NetApp Initiators |
Networking |
Add storage initiators to a initiator group(igroup) with igroup name, storage virtual machine name and list of initiators to be added as the inputs. On successful execution initiator group name and list of initiators added are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Add Network Port Binding to iSCSI Software Adapter |
Virtualization |
Adds virtual machine kernel adapters to the iSCSI software adapter on the selected host. The input parameters required are datacenter, host, iSCSI software adapter, and virtual machine kernel adapters. On successful execution of the task, iSCSI software adapter and virtual machine kernel adapters are generated as outputs. |
VmwareVcenter |
| Add Network to Virtual Machine |
Virtualization |
Add a new virtual network interface card to a virtual machine. Requires datacenter, virtual machine, network, adapter type and mac address type as inputs. On successful execution, virtual machine, network, adapter type, mac address and virtual NIC are generated as outputs. |
VmwareVcenter |
| Add Network to Vmware VM |
Virtualization |
Add Network to Vmware VM |
VmwareVcenter |
| Add Physical NICs to Distributed Virtual Switch |
Virtualization |
Add physical network interface cards to a distributed virtual switch. Requires hypervisor, datacenter, host, distributed virtual switch, and physical network interface cards as mandatory inputs. On successful execution, datacenter, host, distributed virtual switch, and physical network interface cards are generated as outputs. |
VmwareVcenter |
| Add Physical NICs to DistributedVirtualSwitch |
Virtualization |
Task to add physical nics to distributed virtual switch. |
VmwareVcenter |
| Add Physical NICs to Virtual Switch |
Virtualization |
Add physical network interface cards to a virtual switch. Requires hypervisor, datacenter, host, virtual switch, and physical network interface cards as mandatory inputs. On successful execution, datacenter, host, virtual switch, physical network interface cards are generated as outputs. |
VmwareVcenter |
| Add Physical NICs to VirtualSwitch |
Virtualization |
Task to add Physical NICs to Virtual Switch. |
VmwareVcenter |
| Add Port to Port Channel of a MDS switch. |
Virtualization |
Task to add port to port channel of a MDS switch. |
MDSDevice |
| Add Server Policies to Profile |
Compute |
Associates given list of policies to a given profile |
IMC IMCBlade |
| Add Server To iSCSI Software Adapter |
Compute |
Task to add server to iSCSI Software Adapter |
VmwareVcenter |
| Add Storage Export Policy to Volume |
Storage |
Add an export policy to a volume with storage virtual machine name, volume name, export policy name as the inputs. On successful execution volume name and export policy added are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Add Terraform Sensitive Variable |
Terraform Cloud |
Add sensitive variable to Terraform Workspace |
|
| Add Terraform Variable |
Terraform Cloud |
Add variable to Terraform Workspace |
|
| Add Terraform Workspace |
Terraform Cloud |
Creating a Terraform Workspace |
|
| Add Virtual Disk |
Virtualization |
Create a virtual disk or attach an existing disk to a virtual machine. Required fields are datacenter, virtual machine, datastore, and virtual disk. On successful execution, virtual machine name, datastore name, datacenter name, folder name, and virtual disk details are generated as outputs. |
VmwareVcenter |
| Add a new VLAN on a Nexus Switch |
Virtualization |
Task to create a VLAN on a Nexus switch. |
NexusDevice |
| Add a new VSAN on a MDS Switch |
Virtualization |
Task to create a VSAN on a MDS switch. |
MDSDevice |
| Add a new port channel on an MDS switch |
Virtualization |
Task to create a port channel on a MDS switch |
MDSDevice |
| Add iSCSI Server |
Virtualization |
Adds an iSCSI server to an iSCSI software adapter for dynamic discovery of iSCSI servers. The input parameters required are datacenter, host, iSCSI software adapter, target iSCSI server, iSCSI server port and authentication properties. On successful execution of the task, iSCSI server is generated as output. |
VmwareVcenter |
| Add iSCSI Software Adapter |
Virtualization |
Add a new iSCSI software adapter on selected host. The input parameters required are datacenter and host. On successful execution, adapter name, adapter model, iSCSI name, iSCSI alias, adapter status, and authentication method are generated as outputs. |
VmwareVcenter |
| Add iSCSI Software Adapter |
Virtualization |
Create new iSCSI software adapter on host. |
VmwareVcenter |
| Add network port binding to iSCSI Software Adapter |
Virtualization |
Add network port binding to the iSCSI software adapter on the given host. |
VmwareVcenter |
| Adds a VLAN to a trunk or access port on a Nexus Switch |
Virtualization |
Adds a VLAN to a trunk or access port on a Nexus switch. |
NexusDevice |
| Assign IP Address to Virtual Machine Network |
Virtualization |
Assign IP address to virtual network interface card on the virtual machine. Requires datacenter, virtual machine, virtual NIC, guest OS type and IP address type as inputs. On successful execution, virtual machine, virtual NIC and previous IP address are generated as outputs. |
VmwareVcenter |
| Assign IP To Virtual NIC |
Virtualization |
Assign IP To Virtual NIC |
VmwareVcenter |
| Change Spanning Tree Mode |
Virtualization |
Task to change Spanning Tree Mode in Nexus switch. |
NexusDevice |
| Clear Server Storage Controller Configuration |
Compute |
Clears all configuration on the controller. Also, all configuration information from all physical drives configuration is deleted. This action cannot be reverted. |
IMC IMCBlade |
| Clear Server Storage Controller Foreign Configuration |
Compute |
Clears all foreign configuration on the controller. Also, all configuration information from all physical drives hosting foreign configuration is deleted. This action cannot be reverted. |
IMC IMCBlade |
| Compress Hitachi Pool |
Compute |
Compress Hitachi pool. |
HitachiVirtualStoragePlatform |
| Compress Storage Pool |
Storage |
Remove Volumes from a pool to reduce the pool capacity. |
HitachiVirtualStoragePlatform |
| Confirm and Apply Terraform Run |
Terraform Cloud |
Executing terraform apply run |
|
| Connect FlashArray Volume to Host |
Terraform Cloud |
Connect FlashArray volume to host |
PureStorageFlashArray |
| Connect FlashArray Volume to Host |
Terraform Cloud |
Connect FlashArray volume to host. |
PureStorageFlashArray |
| Connect FlashArray Volume to Host Group |
Terraform Cloud |
Connect FlashArray volume to host group |
PureStorageFlashArray |
| Connect FlashArray Volume to Host Group |
Terraform Cloud |
Connect FlashArray volume to host group. |
PureStorageFlashArray |
| Connect Hitachi Volume to Storage Host Group |
Terraform Cloud |
Connect Hitachi storage volume to host group with volume ID, port ID, host group number and LUN number as inputs. |
HitachiVirtualStoragePlatform |
| Connect Initiators to Storage Host |
Storage |
Connect a WWN or IQN list to storage host. Storage host is the entity used to associate initiators to storage and expose as LUNs. Host can map to different terms for Storage vendors. For NetApp ONTAP storage this maps to iGroup. Inputs are host name and list of WWNs or IQNs. Outputs generated are host name created, IQN or WWN list associated with the host. Task can be used with either WWNs or IQNs.For NetApp ONTAP Storage devices if both inputs are given then both initiators will be added. For other vendors if both inputs are given then WWNs are given priority and added. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Connect Volume to Storage Host Group |
Storage |
Connect storage volume to host group with volume name, host group name and LUN number as inputs. The host group name, volume name and LUN number allocated are outputs of this task. Both volume and host group must already exist. |
PureStorageFlashArray |
| Connect WWNs or IQNs to Hitachi Storage Host Group |
Storage |
Connect a WWN or IQN to Hitachi storage host group with Port Id, host Group Id and WWN or IQN as inputs. |
HitachiVirtualStoragePlatform |
| Connect WWNs or IQNs to Hitachi Storage Host Group |
Storage |
Connect a WWN or IQN to Hitachi storage host group with port ID, host group ID and WWN or IQN as inputs. |
HitachiVirtualStoragePlatform |
| Connect WWNsOrIQNs to FlashArray Host |
Storage |
Connect a WWN/IQN list to FlashArray host with host name and List of WWNs/IQNs as inputs |
PureStorageFlashArray |
| Connect WWNsOrIQNs to FlashArray Host |
Storage |
Connect a WWN/IQN list to FlashArray host with host name and List of WWNs/IQNs as inputs. |
PureStorageFlashArray |
| Convert Template to Virtual Machine |
Storage |
Convert Template to Virtual Machine |
VmwareVcenter |
| Convert Virtual Machine Template to Virtual Machine |
Virtualization |
Convert virtual machine template to virtual machine. Requires datacenter and virtual machine template as inputs. On successful execution, virtual machine, virtual machine name and virtual machine template creation option are generated as outputs. |
VmwareVcenter |
| Convert or Clone Virtual Machine as Template |
Virtualization |
Convert or Clone Virtual Machine as Template |
VmwareVcenter |
| Copy Hitachi Volume |
Storage |
Copy a storage volume. |
HitachiVirtualStoragePlatform |
| Copy NX Running to Startup Configuration |
Networking |
Copy running to startup configuration on a Nexus switch. The input parameter required is Nexus switch. On successful execution no output is generated and this task will copy the running configuration to start up configuration on the selected Nexus switch. |
NexusDevice |
| Copy Nexus Switch Running To Startup Configuration |
Networking |
Task to copy the running to startup configuration on a Nexus switch. |
NexusDevice |
| Copy Server Profile |
Compute |
Clones the selected server profile. Creates a new profile and attaches all policies associated with the selected profile to the new profile. |
IMC IMCBlade |
| Create a new Hitachi host group. |
Compute |
Create a new Hitachi host group. |
HitachiVirtualStoragePlatform |
| Create a new Hitachi host group. |
Compute |
Create a new Hitachi host group. |
HitachiVirtualStoragePlatform |
| Create virtual disk on virtual machine |
Compute |
Create a virtual disk on the selected virtual machine. The fields datacenter, virtual machine, datastore, and virtual disk are mandatory. The displayed additional fields help in creating new virtual disk or attaching an existing disk to a selected virtual machine. On successful execution, the following are generated as outputs: virtual machine, datastore, datacenter, folder, and virtual disk. |
VmwareVcenter |
| Delete Server Virtual Drives |
Compute |
Deletes the selected virtual drives to reclaim the used space in the controller. Removing the virtual drive destroys all information on the file systems and deletes the virtual drive from controller. |
IMC IMCBlade |
| Delete Vmware Template |
Compute |
Delete Vmware Template |
VmwareVcenter |
| Delete Vmware Virtual Machine |
Compute |
Delete Vmware Virtual Machine. |
VmwareVcenter |
| Deploy Server Profile |
Compute |
Deploys the selected server profile on the server On successful execution, the Deploy Server Profile workflow will be triggered. |
IMC IMCBlade |
| Deploy Virtual Machine from OVA or OVF |
Virtualization |
Deploy a virtual machine on the selected hypervisor. The inputs cluster (or host), datastore, and URL of the image to be used are mandatory. If folder name is specified, virtual machine is created inside that folder (default is root folder). If a name is not specified for the virtual machine, an internally generated name is used. On successful execution, all inputs to the task are generated as outputs. |
VmwareVcenter |
| Disable iSCSI Software Adapter |
Virtualization |
Disables iSCSI software adapter on the selected host. The input parameters required are datacenter and host. On successful execution, adapter name is generated as output. |
VmwareVcenter |
| Disable iSCSI Software Adapter |
Virtualization |
Disable iSCSI software adapter on host |
VmwareVcenter |
| Disconnect FlashArray Volume from Host |
Virtualization |
Disconnect FlashArray volume from host. |
PureStorageFlashArray |
| Disconnect FlashArray Volume from Host |
Virtualization |
Disconnect FlashArray volume from host. |
PureStorageFlashArray |
| Disconnect FlashArray volume from host group |
Virtualization |
Disconnect FlashArray Volume from host group |
PureStorageFlashArray |
| Disconnect FlashArray volume from host group |
Virtualization |
Disconnect FlashArray Volume from host group. |
PureStorageFlashArray |
| Disconnect Hitachi Volume from Storage Host Group |
Virtualization |
Disconnect Hitachi storage volume from host group with port ID, host group ID, and LUN as inputs. |
HitachiVirtualStoragePlatform |
| Disconnect Initiators from Storage Host |
Storage |
Disconnect a WWN or IQN list from storage host with host name and list of WWNs or IQNs as inputs. Generates as output host name created, IQN or WWN list associated with the host. Task can be used to with either WWNs or IQNs, and if both inputs are given then WWNs are given priority and added. |
HitachiVirtualStoragePlatform PureStorageFlashArray |
| Disconnect NetApp Export Policy Volume |
Storage |
This is a task to disconnect an export policy from a NetApp volume. |
NetAppActiveIqUnifiedManager |
| Disconnect Storage Export Policy from Volume |
Storage |
Task to disconnect an export policy from a volume with storage virtual machine name, volume name and export policy name as the inputs. On successful execution, volume name and export policy disconnected are generated as the outputs. |
NetAppActiveIqUnifiedManager |
| Disconnect Volume from Storage Host Group |
Storage |
Disconnect storage volume from host group with volume name and host group name as inputs. On successful execution, host group name, and volume name are generated as outputs. |
PureStorageFlashArray |
| Disconnect WWNs or IQNs From Hitachi Storage HostGroup |
Storage |
Disconnect a WWN or IQN list from Hitachi storage host group with port ID, host group ID and WWN or IQN as inputs. |
HitachiVirtualStoragePlatform |
| Disconnect WWNsOrIQNs from FlashArray Host |
Storage |
Disconnect a WWN/IQN list from FlashArray host with host name and List of WWNs/IQNs as inputs. |
PureStorageFlashArray |
| Dismount Server Virtual Media Device |
Compute |
Dismounts the selected vMedia device on the server. Use this task only for servers that are not associated with server profiles. For servers that are associated with server profiles, change the virtual media policy and deploy the server profile. |
IMC |
| DismountStandaloneServerVirtualMediaDevice |
Compute |
Mounts vMedia device on a standalone server |
IMC |
| Edit Aggregates For Storage Virtual Machine |
Storage |
Task to edit aggregates for a storage virtual machine with storage virtual machine name and aggregates names as the inputs. On successful execution, the name of the storage virtual machine and aggregates names are generated as the outputs. |
NetAppActiveIqUnifiedManager |
| Edit Amazon Virtual Machine Instance Type |
Storage |
Change Amazon Virtual Machine Instance Type |
AmazonWebService |
| Edit Cloud Virtual Machine Instance Type |
Virtualization |
Change Instance Type of Virtual Machine and monitor the result |
AmazonWebService |
| Edit Cloud Virtual Machine Power State |
Virtualization |
Stop, Start and Reboot Cloud Virtual Machine |
AmazonWebService |
| Edit Datastore Cluster |
Virtualization |
Reconfigure the Storage DRS and other advanced options for the given datastore cluster. This task helps to add or remove datastores from a datastore cluster. The datacenter and datastore cluster inputs are mandatory. The value of Storage DRS, IO metrics, automation level, and IO latency to be reconfigured are optional. On successful execution, datastore cluster, previous storage DRS configurations and current storage DRS configurations are generated as outputs. |
VmwareVcenter |
| Edit Datastore Cluster Configuration |
Virtualization |
Edit datastore cluster configuration |
VmwareVcenter |
| Edit Distributed Virtual Network |
Virtualization |
Edit distributed virtual network. Requires datacenter, folder, distributed virtual network, number of ports, port binding type, and VLAN type as inputs. On successful execution, number of ports before reconfigure, port binding type before reconfigure, and VLAN type before reconfigure are generated as outputs. |
VmwareVcenter |
| Edit Distributed Virtual Network Teaming and Failover Settings |
Virtualization |
Edit Distributed Virtual Network Teaming and Failover settings. Requires datacenter, folder, distributed virtual network, load balancing, network failure detection, notify switches, failback, active uplinks and standby uplinks as inputs. On successful execution, load balancing before reconfigure, network failure detection before reconfigure, notify switches before reconfigure, failback before reconfigure, active uplinks before reconfigure and standby uplinks before reconfigure are generated as outputs. |
VmwareVcenter |
| Edit Distributed Virtual Network Teaming and Failover settings |
Virtualization |
Edit distributed virtual network. |
VmwareVcenter |
| Edit Distributed Virtual Switch |
Virtualization |
Edit distributed virtual switch present on a datacenter. |
VmwareVcenter |
| Edit Distributed Virtual Switch Properties |
Virtualization |
Edit the properties of a distributed virtual switch present on a datacenter. Requires datacenter, folder, distributed virtual switch, network i/o control, MTU, and discovery protocol as inputs. On successful execution, network i/o control before reconfigure, MTU before reconfigure, and discovery protocol before reconfigure are generated as outputs. |
VmwareVcenter |
| Edit Hitachi Pool |
Virtualization |
Change the pool name, pool type, threshold usage rate of the pool and other settings. |
HitachiVirtualStoragePlatform |
| Edit Hot Add Options of a Virtual Machine |
Virtualization |
Enable or disable hot add option for CPU and memory of the virtual machine. The inputs datacenter and virtual machine are mandatory. The value of CPU, memory, hot add enable, or disable flag and folder under which the virtual machine is to be reconfigured are optional. On successful execution, all inputs to the task are generated as outputs. |
VmwareVcenter |
| Edit Hypervisor Distributed Virtual Network |
Virtualization |
Edit distributed virtual network. |
VmwareVcenter |
| Edit Interface VLAN on a Nexus Switch |
Virtualization |
Task to edit interface VLAN of a Nexus switch |
NexusDevice |
| Edit NX Spanning Tree Protocol |
Networking |
Edits spanning tree mode, control and simulate on a Nexus switch. The input parameters required are Nexus switch , STP Mode / Control / Simulate Value. On successful execution, STP mode, STP control, STP simulate values are generated as outputs. |
NexusDevice |
| Edit NetApp Aggregates For Storage Virtual Machine |
Networking |
This is a task to edit aggregates for a NetApp virtual machine. |
NetAppActiveIqUnifiedManager |
| Edit NetApp Export Policy Rule |
Networking |
This is a task to edit a NetApp export policy rule. |
NetAppActiveIqUnifiedManager |
| Edit NetApp Snapshot Policy |
Networking |
This is a task to edit NetApp snapshot policy. |
NetAppActiveIqUnifiedManager |
| Edit NetApp Snapshot Policy Schedule |
Networking |
This is a task to edit a NetApp snapshot policy schedule. |
NetAppActiveIqUnifiedManager |
| Edit Port Mode |
Networking |
Sets the port mode. The input parameters required are port and mode. On successful execution, port and mode are generated as outputs. |
NexusDevice |
| Edit Resource Limits of a Virtual Machine |
Virtualization |
Reconfigure CPU and memory task reconfigures the CPU and Memory value for the given virtual machine. The inputs datacenter and virtual machine are mandatory. The value of CPU, memory, cores per socket and folder under which the virtual machine is to be reconfigured are optional. On successful execution, all inputs to the task are generated as outputs. |
VmwareVcenter |
| Edit Storage Export Policy Rule |
Storage |
Task to edit a storage export policy rule with the storage virtual machine name, export policy name, index of rule to be updated, client match list, superuser security type, list of protocols, list of read only export policy rules and list of read write export policy rules as the inputs. On successful execution, the name of the export policy updated is generated as the output. |
NetAppActiveIqUnifiedManager |
| Edit Storage Pool |
Storage |
Change the pool name, pool type, threshold usage rate of the pool, and other settings. |
HitachiVirtualStoragePlatform |
| Edit Storage Snapshot Policy |
Storage |
Task to edit a snapshot policy with storage virtual machine name, snapshot policy name, comment and whether the snapshot policy is enabled as the inputs. On successful execution, the name of snapshot policy updated is generated as the output. |
NetAppActiveIqUnifiedManager |
| Edit Storage Snapshot Policy Schedule |
Storage |
Task to edit a snapshot policy schedule with storage virtual machine name, snapshot policy name, schedule name to be updated and the number of snapshot copies to maintain of the volume as the inputs. On successful execution, the name of snapshot policy is generated as the output. |
NetAppActiveIqUnifiedManager |
| Edit Virtual Machine Configuration |
Storage |
Edit virtual machine configuration |
VmwareVcenter |
| Edit maximum transfer unit of a Port or PortChennal or Switch |
Storage |
Task to edit maximum transfer unit of a Port, PortChannel or Switch. |
NexusDevice |
| Edit speed of a Port |
Storage |
Task to edit speed of a Port |
NexusDevice |
| Enable hot add option for a Virtual Machine |
Storage |
Enable hot add option for a Virtual Machine |
VmwareVcenter |
| Expand FlashArray Volume |
Storage |
Expand a FlashArray volume. |
PureStorageFlashArray |
| Expand FlashArray Volume |
Storage |
Expand a FlashArray volume. |
PureStorageFlashArray |
| Expand FlashArray Volume |
Storage |
Expand a FlashArray volume. |
PureStorageFlashArray |
| Expand Hitachi Pool |
Storage |
Expand Hitachi pool. |
HitachiVirtualStoragePlatform |
| Expand Hitachi Volume |
Storage |
Expand a volume with volume name and size as inputs. On successful execution, volume name and size are generated as outputs. |
HitachiVirtualStoragePlatform |
| Expand Hitachi Volume |
Storage |
Expand a volume with volume name and size as inputs. On successful execution, volume name and size are generated as outputs. |
HitachiVirtualStoragePlatform |
| Expand Hypervisor Datastore |
Virtualization |
Expand the specified datastore to its full extent on a given hypervisor. Requires datacenter, cluster (or host), and datastore inputs. The expanded capacity is visible to all hosts connected to the datastore. On successful execution, the name, capacity, free space of the datastore, datacenter, and host name are generated as outputs. |
VmwareVcenter |
| Expand NetApp LUN |
Virtualization |
This is a task to expand a NetApp LUN. |
NetAppActiveIqUnifiedManager |
| Expand NetApp Volume |
Virtualization |
Expand a NetApp volume with volume name, storage virtual machine name and size as the inputs. On successful execution name and size of the expanded volume are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Expand Storage LUN |
Storage |
Expand a storage LUN with LUN path, Storage Virtual Machine name and LUN size as the inputs. On successful execution path and size of the expanded LUN are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Expand Storage Pool |
Storage |
Add LDEVs to the pool to expand the capacity of a pool. |
HitachiVirtualStoragePlatform |
| Expand Storage Volume |
Storage |
Expand a volume with volume name and size as inputs. On successful execution, volume name and size are generated as outputs. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Expand VMware Datastore |
Storage |
ExpandVMwareDatastore |
VMwarevCenter |
| Expand VMware Datastore |
Storage |
ExpandVMwareDatastore |
VmwareVcenter |
| Find FlashArray volume by ID |
Storage |
Find FlashArray volume given volume ID. |
PureStorageFlashArray |
| Find FlashArray volume by ID |
Storage |
Find FlashArray volume given volume ID. |
PureStorageFlashArray |
| Find FlashArray volume by ID |
Storage |
Find FlashArray volume given volume ID. |
PureStorageFlashArray |
| Find Hitachi Volume by NAA Id |
Storage |
Find details of a storage volume given NAA Id as volume identifier. Generates as output volume details associated with the storage device. |
HitachiVirtualStoragePlatform |
| Find Hypervisor Storage |
Virtualization |
Scan host on selected hypervisor to find new volumes and/or storage devices. Requires datacenter, cluster (or host) as inputs. Scanning looks for VMFS volumes (default) and/or storage devices, which are optional inputs. No outputs are generated from this task. |
VmwareVcenter |
| Find NetApp Igroup LUN Map |
Storage |
Find if an Initiator Group is mapped to a LUN with give initiator Group name, Storage Virtual Machine name as the inputs. If initiator Group is mapped to any LUNs then initiator Group name and list of LUN names are generated as outputs, else task will fail with an error "No LUN mapped to the Initiator Group". |
NetAppActiveIqUnifiedManager |
| Find NetApp LUN by ID |
Storage |
Task to Find a LUN using its serial number with NaaID as the input. If LUN exist with given serial number then LUN path and storage virtual machine name are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Find NetApp Volume by ID |
Storage |
Find NetApp NFS volume given server IP and mount path. |
NetAppActiveIqUnifiedManager |
| Find NetApp Volume by ID |
Storage |
Find NetApp NFS volume given server IP and mount path. |
NetAppActiveIqUnifiedManager |
| Find Storage LUN by ID |
Storage |
Find a LUN using it's serial number with NaaID as the input. If LUN exist with given serial number then LUN path and Storage Virtual Machine name are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Find Storage Volume by ID |
Storage |
Find details of a storage volume given the volume identifier like NAA Id or EUI Id. Generates as output volume details associated with the storage device. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Find VMware Storage |
Storage |
Rescan Vmware hypervisor and find new VMFS volumes and storage devices. |
VMwarevCenter |
| Find VMware Storage |
Storage |
Rescan Vmware hypervisor and find new VMFS volumes and storage devices. |
VmwareVcenter |
| Format Hitachi Volume |
Storage |
Format Hitachi volume. |
HitachiVirtualStoragePlatform |
| Format Storage Volume |
Storage |
Format Storage Volume. |
HitachiVirtualStoragePlatform |
| Get Cluster Details |
Virtualization |
Get details of a cluster. Inputs are datacenter and cluster. On successful execution, datacenter, cluster, associated hosts count, hosts, CPU capacity, memory capacity, total vMotion migrations, total processors are generated as outputs. |
VmwareVcenter |
| Get Cluster Details |
Virtualization |
Get Cluster Details. |
VmwareVcenter |
| Get Datastore Cluster |
Virtualization |
Get details of a datastore cluster. Inputs are datacenter and datastore cluster. On successful execution, Storage DRS, IO metrics, automation level, and IO latency are generated as outputs. |
VmwareVcenter |
| Get Datastore Cluster Details |
Virtualization |
Get Datastore Cluster Details. |
VmwareVcenter |
| Get Hypervisor Datastore |
Virtualization |
Get details of a datastore. Inputs are datacenter, cluster (or host), and datastore. On successful execution, the NaaId (Network Addressing Authority Id), LUN number of datastore, host name, datastore name are generated as outputs for VMFS datastores and remote host, remote hostname, remote path, security type and datastore name are generated as outputs for NFS type datastores. |
VmwareVcenter |
| Get Target |
Target Management |
Fetches the details of a claimed target endpoint. Inputs are name, hostname or IP address and target type. On successful execution of the task, name, moid, hostname or IP address, port, connection status, target type are generated as the task outputs. |
|
| Get Terraform Current State Version |
Terraform Cloud |
Fetches the current state version for the workspace |
|
| Get Terraform Run ID |
Terraform Cloud |
Get the appropriate Run Id for the workspace |
|
| Get Terraform Run State |
Terraform Cloud |
Monitor Terraform Run Execution State |
|
| Get Terraform State Version Contents |
Terraform Cloud |
Fetches the contents of the state version for the workspace |
|
| Get Terraform Workspace Details |
Terraform Cloud |
Fetches the Workspace ID, Organization Name and other configuration for the given Workspace |
|
| Get Vmware Datastore |
Terraform Cloud |
Fetch details of Vmware datastore. |
VMwarevCenter |
| Get Vmware Datastore |
Terraform Cloud |
Fetch details of Vmware datastore. |
VmwareVcenter |
| Grant Access To Terraform State |
Terraform Cloud |
Grant access of a Terraform Workspace State to another Workspace |
|
| Import Server Storage Controller Foreign Configuration |
Compute |
Verifies the security key for a foreign configuration and imports the configuration on the storage controller. |
IMC IMCBlade |
| Invoke Ansible Playbook |
Executors |
Executes Ansible Playbook against the given endpoint. This task can be executed on targets added as Ansible Endpoint in Intersight. |
|
| Invoke Guest Customization for Linux Virtual Machine |
Virtualization |
Guest Customization for a virtual machine. The virtual machine will be restarted to apply the customization. The inputs datacenter, virtual machine name, Hostname and timezone are mandatory. On successful execution, the customized properties of virtual machine will be generated as outputs. |
VmwareVcenter |
| Invoke Guest Customization for Virtual Machine |
Virtualization |
Guest Customization for a virtual machine. The virtual machine will be restarted to apply the customization. On successful execution, the customized properties of virtual machine will be generated as outputs. |
VmwareVcenter |
| Invoke Guest Customization for Windows Virtual Machine |
Virtualization |
Guest Customization for a virtual machine. The virtual machine will be restarted to apply the customization. The inputs datacenter, virtual machine name, hostname, timezone, join domain or workgroup, fullname and organization are mandatory. On successful execution, the customized properties of virtual machine will be generated as outputs. |
VmwareVcenter |
| Invoke PowerShell Script |
Executors |
Executes the given PowerShell script against the given PowerShell endpoint. The endpoint is typically a windows machine with PowerShell Remoting enabled to allow for scripts to be executed remotely. The task connects to the PowerShell endpoint using the WinRM protocol. |
|
| Invoke SSH Commands |
Executors |
Executes SSH commands against the given endpoint. This task can be executed on targets added as SSH Endpoint or Ansible Endpoint in Intersight. |
|
| Invoke Web API Request |
Executors |
Invokes the given Web API against the given endpoint. The endpoint can be Intersight API or an external endpoint added as Target in Intersight. Please refer Supported Endpoints section in the Web API request end user documentation for the list of Intersight Targets on which Web API task can be invoked. |
|
| Mount Server Virtual Media Device |
Compute |
Mounts the given vMedia device on to the server. Use this task only for servers that are not associated with server profiles. For servers that are associated with profiles, change the virtual media policy and deploy the server profile. |
IMC |
| MountStandaloneServerVirtualMediaDevice |
Compute |
Mounts vMedia device on a standalone server |
IMC |
| Move Virtual Machine |
Virtualization |
Move a virtual machine to another host, storage, or host and storage. To move a virtual machine to another host, target host input is mandatory. To move a virtual machine to another datastore, target datastore is mandatory. To move a virtual machine to another host and datastore, both target host and target datastore are mandatory. On successful execution, all inputs to the task are generated as outputs. |
VmwareVcenter |
| MoveVmwareVMImpl |
Virtualization |
Move Vmware virtual machine |
VmwareVcenter |
| New Datastore Cluster |
Virtualization |
Create a new datastore cluster under datacenter. Requires datacenter, datastore cluster name, datastores, storage DRS, IO metric, automation level, utilized space and IO latency as inputs. On successful execution, datastore cluster and storage DRS configurations are generated as outputs. |
VmwareVcenter |
| New Datastore Cluster |
Virtualization |
Task to create datastore cluster |
VmwareVcenter |
| New Distributed Virtual Network |
Virtualization |
Add new distributed virtual network to the distributed virtual switch. Requires datacenter, distributed virtual switch, distributed virtual network name, number of ports, port binding type, and VLAN type as inputs. On successful execution, datacenter, distributed virtual network name, number of ports,port binding type, VLAN type, VLAN Id, and VLAN trunk range are generated as outputs. |
VmwareVcenter |
| New Distributed Virtual Switch |
Virtualization |
Add distributed virtual switch to the datacenter. Requires datacenter, distributed virtual switch name, folder, number of uplink ports, network name, and MTU as inputs. On successful execution, datacenter, distributed virtual switch name, folder, number of uplink ports, network name, MTU and uplinks are generated as outputs. |
VmwareVcenter |
| New Distributed Virtual Switch |
Virtualization |
Task to create Distributed Virtual Switch. |
VmwareVcenter |
| New FlashArray Host |
Virtualization |
Create a new FlashArray host. |
PureStorageFlashArray |
| New FlashArray Host |
Virtualization |
Create a new FlashArray host. |
PureStorageFlashArray |
| New FlashArray Host |
Virtualization |
Create a new FlashArray host. |
PureStorageFlashArray |
| New FlashArray Host Group |
Virtualization |
Create a new FlashArray host group. |
PureStorageFlashArray |
| New FlashArray Host Group |
Virtualization |
Create a new FlashArray host group. |
PureStorageFlashArray |
| New FlashArray Volume |
Virtualization |
Create a new FlashArray volume. |
PureStorageFlashArray |
| New FlashArray Volume |
Virtualization |
Create a new FlashArray volume. |
PureStorageFlashArray |
| New FlashArray Volume |
Virtualization |
Create a new FlashArray volume. |
PureStorageFlashArray |
| New Hitachi Pool |
Virtualization |
Create a pool with pool ID, pool name, pool type, volume IDs, and so on as inputs. |
HitachiVirtualStoragePlatform |
| New Hitachi Snapshot Data |
Storage |
Split the specified pair, and snapshot data at the time of the split is stored. |
HitachiVirtualStoragePlatform |
| New Hitachi Snapshot Pair |
Storage |
Create a pair for snapshot data with a primary volume ID, a secondary volume ID, a pool id, a snapshot group name, and so on as inputs. |
HitachiVirtualStoragePlatform |
| New Hitachi Volume |
Storage |
Create a storage volume with volume name and volume size as inputs. Generates the volume name and volume size as outputs. |
HitachiVirtualStoragePlatform |
| New Hitachi Volume |
Storage |
Create a storage volume with volume name and volume size as inputs. Generates the volume name and volume size as outputs. |
HitachiVirtualStoragePlatform |
| New Hypervisor Cluster |
Virtualization |
Add cluster to the selected hypervisor. Requires datacenter, cluster and folder as inputs. On successful execution, cluster name is generated as output. |
VmwareVcenter |
| New Hypervisor Datacenter |
Virtualization |
Create new datacenter on the selected hypervisor. If folder name is specified, datacenter is created inside that folder (default is root folder). On successful execution, the name of datacenter and the associated folder are generated as outputs. |
VmwareVcenter |
| New Hypervisor Datastore |
Virtualization |
Create a new datastore on selected hypervisor. Requires datacenter, cluster (or host), and datastore. For VMFS, the canonical disk name, and VMFS version inputs are needed. For NFS, remote server and mount path, and NFS version are needed. On successful execution, the datastore name, disk name, VMFS version, and datacenter name are generated as outputs. |
VmwareVcenter |
| New Hypervisor Datastore |
Virtualization |
Create a new VMFS/NFS Datastore on Vmware hypervisor. |
VmwareVcenter |
| New Hypervisor Distributed Virtual Network |
Virtualization |
Task to create distributed virtual network. |
VmwareVcenter |
| New Hypervisor Host |
Virtualization |
Add host to the selected hypervisor. Requires datacenter, host IP/name, username, password as inputs. On successful execution, host name is generated as output. |
VmwareVcenter |
| New Hypervisor Virtual Machine Kernel Adapter on Distributed Virtual Network |
Virtualization |
Task to create virtual machine kernel adapter on distributed virtual Network |
VmwareVcenter |
| New Hypervisor Virtual Machine Kernel Network |
Virtualization |
Task to create virtual machine kernel network |
VmwareVcenter |
| New Hypervisor Virtual Machine Network |
Virtualization |
Task to create virtual machine network. |
VmwareVcenter |
| New MDS Port Channel |
Networking |
Create a port channel on the MDS switch. |
MDSDevice |
| New MDS VSAN |
Networking |
Create a VSAN on the MDS switch. |
MDSDevice |
| New NetApp Data IP Interface |
Networking |
This is a task to create a new NetApp data IP interface. |
NetAppActiveIqUnifiedManager |
| New NetApp Export Policy |
Networking |
This is a task to create a new NetApp export policy. |
NetAppActiveIqUnifiedManager |
| New NetApp Export Policy Rule |
Networking |
This is a task to create a NetApp export policy rule. |
NetAppActiveIqUnifiedManager |
| New NetApp FC Interface |
Networking |
This is a task to create a new NetApp FC interface. |
NetAppActiveIqUnifiedManager |
| New NetApp IP Interface |
Networking |
This is a task to create a new NetApp IP interface |
NetAppActiveIqUnifiedManager |
| New NetApp Initiator Group |
Networking |
Create a storage initiator group with initiator group name, operating system name, storage virtual machine name, protocol name and list of initiators to be added as the inputs. On successful execution initiator group name and list of initiators added are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New NetApp LUN Map |
Networking |
Create a mappage between storage initiator group and a lun with initiator group name, lun path, storage virtual machine name as the inputs. On successful execution initiator group name, lun path and LUN number assigned to the connection are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New NetApp Lun |
Networking |
This is a task to create a new NetApp Lun. |
NetAppActiveIqUnifiedManager |
| New NetApp NAS Smart Volume |
Storage |
Create a NetApp NAS volume with volume name, storage virtual machine name, volume size, performance service level, and export policy or access controls as the inputs. On successful execution, the volume name, volume capacity, volume uuid, and export policy id are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New NetApp Smart LUN |
Storage |
Create a storage LUN and its Volume, select an existing Initiator Group or create a new one, and map the LUN to the Initiator Group. Inputs are the Storage Virtual Machine name, LUN name, LUN size, Performance Service Level, LUN Operating System format, and either a new or existing Initiator Group. On successful execution LUN path, NAAID, LUN capacity, Volume name, Initiator Group name, and logical unit number are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New NetApp Snapshot Policy |
Storage |
This is a task to create a NetApp snapshot policy. |
NetAppActiveIqUnifiedManager |
| New NetApp Snapshot Policy Schedule |
Storage |
This is a task to create a NetApp snapshot policy schedule. |
NetAppActiveIqUnifiedManager |
| New NetApp Virtual Machine |
Storage |
This is a task to create a new NetApp storage virtual machine. |
NetAppActiveIqUnifiedManager |
| New NetApp Volume |
Storage |
Create a NetApp SAN or NAS volume with volume name, storage virtual machine name, aggregrates names, mount path and volume size as the inputs. On successful execution name and size of the volume created are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New NetApp Volume Snapshot |
Storage |
This is a task to create a NetApp volume snapshot. |
NetAppActiveIqUnifiedManager |
| New Server Precision Boot Device |
Compute |
Adds a precision boot device in the enabled state to the boot order. Use this task only for servers that are not associated with server profile. For servers that are associated with profiles, change the boot order policy and deploy the server profile. |
IMC |
| New Server Profile |
Compute |
Creates a server profile with the details provided by user in an organization where the user has permission. |
IMC IMCBlade |
| New Server Profile from Template |
Compute |
Creates a server profile from the selected template and adds the associated policies to the server profile. If the 'Target Profile Name' is provided, it will be considered as the name of the profile to be created. The task will fail, if the profile name already exists. If the 'Target Profile Name' is not provided, the name of the profile is generated from the 'Target Profile Name Prefix' and 'Target Profile Name Suffix' inputs. |
IMC IMCBlade |
| New Standalone Server Precision Boot Device |
Compute |
Adds a boot device. |
IMC |
| New Storage Data IP Interface |
Storage |
Create a storage data IP interface with IP interface name, interface IP address, interface netmask, ipspace name, storage virtual machine name and location properties as the inputs. On successful execution interface name, interface IP address, interface netmask are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New Storage Export Policy |
Storage |
Create a storage export policy with storage virtual machine name, export policy name, Client Match List, Superuser Security Type, list of protocols , list of Read Only export policy rules, list of Read Write export policy rules as the inputs. On successful execution name of the export policy created is generated as output. |
NetAppActiveIqUnifiedManager |
| New Storage Export Policy Rule |
Storage |
Task to create a storage export policy rule with storage virtual machine name, export policy name, client match list, a list of read only export policy rules, a list of read write export policy rules, superuser security type and list of protocols as the inputs. On successful execution, the name of the export policy is generated as the output. |
NetAppActiveIqUnifiedManager |
| New Storage Fibre Channel Interface |
Storage |
Create a FC interface with interface name, Storage Virtual Machine name, Data Protocol and location properties as the inputs. On successful execution Interface Name, WWNN, WWPN are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New Storage Host |
Storage |
Create a storage host with host name and list of WWNs and IQNs to be associated with it as input. Storage host is the entity used to associate initiators to storage and expose as LUNs. Host can map to different terms for Storage vendors. For NetApp ONTAP storage this maps to iGroup. Outputs are host name, and associated IQN or WWN list. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| New Storage Host Group |
Storage |
Create a host group with host group name as input. On successful execution, the newly created host group name is generated as output. |
PureStorageFlashArray |
| New Storage LUN |
Storage |
Create a storage LUN with inputs as LUN name, volume name, operating system name, storage virtual machine name, size of LUN. On successful execution LUN path, NAAID and LUN capacity are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New Storage LUN ID |
Storage |
Connect storage to a host with host name and details needed to create LUN ID. On successful execution, host name, details of the LUN ID are generated. For NetApp ONTAP Storage, connect storage LUN to an iGroup with Inputs as LUN name and iGroup name. iGroup is referred as Host for input. On successful execution iGroup name, LUN name and LUN number are generated as outputs. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| New Storage Pool |
Storage |
Create a pool with a pool ID, a pool name, a pool type, volume IDs, and so on that are specified as input values. |
HitachiVirtualStoragePlatform |
| New Storage Snapshot Policy |
Storage |
Task to create a snapshot policy with a storage virtual machine name, snapshot policy name, number of snapshot copies to maintain and schedule to capture snapshot of the volume as the inputs. On successful execution, the name of snapshot policy is generated as the output. |
NetAppActiveIqUnifiedManager |
| New Storage Snapshot Policy Schedule |
Storage |
Task to create a snapshot policy schedule with storage virtual machine name, snapshot policy name, number of snapshot copies to maintain and schedule to capture snapshot of the volume as the inputs. On successful execution, the name of snapshot policy is generated as the output. |
NetAppActiveIqUnifiedManager |
| New Storage Virtual Machine |
Storage |
Create a Storage Virtual Machine with Storage Virtual Machine name and list of protocols to be enabled as inputs. Optional parameters for the Management interface include Interface name, Interface IP address, Interface Netmask, Broadcast Domain, location Node name as the inputs. On successful execution Storage Virtual Machine name, Storage Virtual Machine Root Volume name, Management IP address, Protocols enabled are generated as outputs. |
NetAppActiveIqUnifiedManager |
| New Storage Volume |
Storage |
Create a storage volume with volume name and volume size as inputs. Generates the volume name and volume size as outputs. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| New Storage Volume Snapshot |
Storage |
Task to create a volume snapshot with a volume name, storage virtual machine name and the snapshot name to be created as the inputs. On successful execution, the name of volume snapshot is generated as the output. |
NetAppActiveIqUnifiedManager |
| New Target |
Target Management |
Claims a new target endpoint in Intersight. The supported target types are HTTP , SSH, Powershell and Ansible endpoint. |
|
| New VMFS Datastore |
Target Management |
Create a new VMFS Datastore on Vmware hypervisor. |
VMwarevCenter |
| New VMFS Datastore |
Virtualization |
Create a new datastore on selected hypervisor. Requires datacenter, cluster (or host), datastore, and the canonical disk name, and VMFS version as inputs. On successful execution, the datastore name, disk name, VMFS version, and datacenter name are generated as outputs. |
VmwareVcenter |
| New VMFS Datastore |
Virtualization |
Create a new VMFS Datastore on Vmware hypervisor. |
VmwareVcenter |
| New VMKernel Adapter on Distributed Virtual Network |
Virtualization |
Add new VMKernel adapter to a distributed virtual network. Requires datacenter, host, distributed virtual network, VMKernel network name, vlan id, ipv4 settings, and VMKernel port settings as inputs. On successful execution, datacenter, host, distributed virtual network, vlan id, ipv4 settings, and VMKernel port settings are generated as outputs. |
VmwareVcenter |
| New VMKernel Adapter on Virtual Switch |
Virtualization |
Add new VMKernel adapter to a virtual switch. Requires datacenter, host, virtual switch, virtual machine network, mtu, ipv4 settings, and VMKernel port settings as inputs. On successful execution, datacenter, host, virtual switch, virtual machine network, mtu, ipv4 settings, and VMKernel port settings are generated as outputs. |
VmwareVcenter |
| New VMKernel Adapter on Virtual Switch |
Virtualization |
Task to create VMKernel adapter. |
VmwareVcenter |
| New VMKernel Network on Virtual Switch |
Virtualization |
Add new virtual machine kernel (VMKernel) network to a virtual switch. Requires datacenter, host, virtual switch, VMKernel network name, vlan id, ipv4 settings, and VMKernel port settings as inputs. On successful execution, datacenter, host, virtual switch, VMKernel network name, vlan id, and device name are generated as outputs. |
VmwareVcenter |
| New Virtual Machine Network |
Virtualization |
Add new virtual machine network to the virtual switch. Requires datacenter, host, virtual switch, virtual machine network name, and VLAN Id as inputs. On successful execution, datacenter, host, virtual switch, virtual machine network name, and VLAN Id are generated as outputs. |
VmwareVcenter |
| New Virtual Machine Snapshot |
Virtualization |
Creates a new snapshot of a virtual machine. This task backs up an existing virtual machine as a snapshot for use as backup in case of failure. Requires datacenter, virtual machine, snapshot name, description, snapshot backup configuration which includes snapshot the virtual machine memory and quiesce guest file system as inputs. On successful execution, datacenter, virtual machine, virtual machine name, snapshot name, snapshot id and manage snapshot details are generated as outputs. |
VmwareVcenter |
| New Virtual Machine Snapshot |
Virtualization |
New Virtual Machine Snapshot |
VmwareVcenter |
| New Virtual Machine Template |
Virtualization |
Create virtual machine template. Using this task user can clone or convert virtual machine to a virtual machine template. Convert virtual machine to virtual machine template operation is applicable only for the virtual machines that are in powered off state. Requires datacenter, virtual machine and virtual machine template option as inputs. On successful execution, virtual machine, virtual machine name, virtual machine template name, virtual machine template path and virtual machine template option are generated as outputs. |
VmwareVcenter |
| New Virtual Machine from Template or Clone from Virtual Machine |
Virtualization |
Create new virtual machine on the selected Hypervisor based on specifications in a virtual machine or template file. The inputs cluster (or host), datastore, and template name or virtual machine are mandatory. If folder name is specified, then virtual machine will be placed within the folder. On successful execution, name of virtual machine and template name or virtual machine are generated as outputs. |
VmwareVcenter |
| New Virtual Switch |
Virtualization |
Add virtual switch to the host. Requires datacenter, host, virtual switch name, number of ports, mtu and adapter as inputs. On successful execution, datacenter, host, virtual switch name, number of ports, and mtu are generated as outputs. |
VmwareVcenter |
| New Virtual Switch |
Virtualization |
Task to create virtual switch. |
VmwareVcenter |
| New Vmware Cluster |
Virtualization |
New Vmware Cluster |
VmwareVcenter |
| New Vmware Datacenter |
Virtualization |
New Vmware Datacenter |
VmwareVcenter |
| New Vmware Host |
Virtualization |
New Vmware Host |
VmwareVcenter |
| New Vmware VM from OVA or OVF |
Virtualization |
New Vmware VM |
VmwareVcenter |
| New Vmware Virtual Machine from Template or Clone from Virtual Machine |
Virtualization |
New Vmware virtual machine from template or Clone from Virtual Machine |
VmwareVcenter |
| NewGuestCustomizationforLinuxVM |
Virtualization |
Guest Customization for virtual machine |
VmwareVcenter |
| NewGuestCustomizationforWindowsVM |
Virtualization |
Guest Customization for windows virtual machine. |
VmwareVcenter |
| NewGuestCustomizationforWindowsVM |
Virtualization |
Guest Customization for virtual machine. |
VmwareVcenter |
| NewServerProfileImpl |
Virtualization |
Create new server profile task implementation. |
|
| Remove Cluster from hypervisor |
Virtualization |
Remove cluster from hypervisor |
VmwareVcenter |
| Remove Datastore Cluster |
Virtualization |
Removes the datastore cluster from the datacenter. Requires datacenter and datastore cluster as inputs. On successful execution, datastore cluster is generated as output. |
VmwareVcenter |
| Remove Datastore Cluster |
Virtualization |
Task to create datastore cluster |
VmwareVcenter |
| Remove Distributed Virtual Network |
Virtualization |
Remove existing distributed virtual and kernel network from the distributed virtual switch. Requires datacenter, distributed virtual switch, and distributed virtual network as inputs. On successful execution, datacenter, distributed virtual switch, and distributed virtual network are generated as outputs. |
VmwareVcenter |
| Remove Distributed Virtual Switch |
Virtualization |
Remove distributed virtual switch from datacenter. Requires datacenter, distributed virtual switch name, and folder as inputs. On successful execution, datacenter, distributed virtual switch name, and folder are generated as outputs. |
VmwareVcenter |
| Remove Distributed Virtual Switch |
Virtualization |
Task to remove distributed virtual switch. |
VmwareVcenter |
| Remove FlashArray Host |
Virtualization |
Remove a FlashArray host. |
PureStorageFlashArray |
| Remove FlashArray Host |
Virtualization |
Remove a FlashArray host. |
PureStorageFlashArray |
| Remove FlashArray Host |
Virtualization |
Remove a FlashArray host. |
PureStorageFlashArray |
| Remove FlashArray Host Group |
Virtualization |
Remove a new FlashArray host group. |
PureStorageFlashArray |
| Remove FlashArray Host Group |
Virtualization |
Remove a new FlashArray host group. |
PureStorageFlashArray |
| Remove FlashArray Volume |
Virtualization |
Remove a FlashArray volume. |
PureStorageFlashArray |
| Remove FlashArray Volume |
Virtualization |
Remove a FlashArray volume. |
PureStorageFlashArray |
| Remove FlashArray Volume |
Virtualization |
Remove a FlashArray volume. |
PureStorageFlashArray |
| Remove Hitachi Pool |
Virtualization |
Remove Hitachi pool. |
HitachiVirtualStoragePlatform |
| Remove Hitachi Snapshot Data |
Storage |
Use the specified snapshot data to resynchronize a pair. When the pair is resynchronized, all of the snapshot data will be deleted. |
HitachiVirtualStoragePlatform |
| Remove Hitachi Snapshot Pair |
Storage |
Delete the specified pair for snapshot data with a primary volume ID and a secondary volume ID. |
HitachiVirtualStoragePlatform |
| Remove Hitachi Volume |
Storage |
Remove Hitachi Volume. |
HitachiVirtualStoragePlatform |
| Remove Hitachi Volume |
Storage |
Remove Hitachi volume. |
HitachiVirtualStoragePlatform |
| Remove Host from Distributed Virtual Switch |
Virtualization |
Remove host from distributed virtual switch. Requires datacenter, host and distributed virtual switch as inputs. On successful execution, datacenter, host and distributed virtual switch are generated as outputs. |
VmwareVcenter |
| Remove Host from Distributed Virtual Switch |
Virtualization |
Task to remove host from distributed virtual switch. |
VmwareVcenter |
| Remove Host from Storage Host Group |
Storage |
Remove single host member from a host group with host name and host group name as inputs. On successful execution, the host group name and the list of hosts in the host group are generated as outputs. |
PureStorageFlashArray |
| Remove Hosts from FlashArray host group |
Storage |
Remove host(s) member from FlashArray host group |
PureStorageFlashArray |
| Remove Hosts from FlashArray host group |
Storage |
Remove host(s) member from FlashArray host group. |
PureStorageFlashArray |
| Remove Hosts from Storage Host Group |
Storage |
Remove host member(s) from a host group with host name(s) and host group name as inputs. On successful execution, the host group name and the list of hosts in the host group are generated as outputs. |
PureStorageFlashArray |
| Remove HyperFlex AP Virtual Machine |
Storage |
Deletes HyperFlex AP virtual machine from hypervisor |
|
| Remove Hypervisor Cluster |
Virtualization |
Remove cluster from hypervisor. Requires datacenter, and cluster as inputs. On successful execution, cluster name is generated as output. |
VmwareVcenter |
| Remove Hypervisor Datacenter |
Virtualization |
Remove specified datacenter from a hypervisor. If folder is specified, the datacenter must exist within the folder. On successful execution, the name of the datacenter and associated folder are generated as outputs. |
VmwareVcenter |
| Remove Hypervisor Datastore |
Virtualization |
Remove datastore from selected hypervisor. Requires datacenter, cluster (or host), datastore as inputs. On successful execution, the datastore name, NaaId of the deleted datastore, and the LUN number are generated as outputs. |
VmwareVcenter |
| Remove Hypervisor Datastore |
Virtualization |
Remove a VMFS datastore from Vmware hypervisor. |
VmwareVcenter |
| Remove Hypervisor Distributed Virtual Network |
Virtualization |
Task to remove distributed virtual network. |
VmwareVcenter |
| Remove Hypervisor Host |
Virtualization |
Remove host from a selected hypervisor. Requires datacenter and host as inputs. On successful execution, host name is generated as output |
VmwareVcenter |
| Remove Hypervisor Virtual Machine Network |
Virtualization |
Task to remove virtual machine network. |
VmwareVcenter |
| Remove IWE Virtual Machine |
Virtualization |
Delete IWE virtual machine from hypervisor |
|
| Remove MDS DNS Server |
Networking |
Remove DNS from a MDS switch. |
MDSDevice |
| Remove MDS NTP Server |
Networking |
Removes NTP server from the MDS switch. |
MDSDevice |
| Remove MDS Port Channel |
Networking |
Delete a port channel on an MDS switch. |
MDSDevice |
| Remove MDS Port from Port Channel |
Networking |
Remove a port from a port channel on a MDS switch |
MDSDevice |
| Remove MDS VSAN |
Networking |
Remove a VSAN from an MDS switch. |
MDSDevice |
| Remove NTP Server from a MDS Switch |
Networking |
Removes NTP server from a MDS switch. |
MDSDevice |
| Remove NX VLAN |
Networking |
Deletes the VLAN from a Nexus switch. |
NexusDevice |
| Remove NX VLAN from Trunk or Access Port |
Networking |
Removes the VLAN from the trunk or access port of a Nexus switch. |
NexusDevice |
| Remove NetApp Export Policy |
Networking |
This is a task to remove a NetApp export policy. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Export Policy Rule |
Networking |
This is a task to remove a NetApp export policy rule. |
NetAppActiveIqUnifiedManager |
| Remove NetApp FC Interface |
Networking |
This is a task to remove a NetApp FC interface. |
NetAppActiveIqUnifiedManager |
| Remove NetApp IP Interface |
Networking |
This is a task to remove a NetApp IP interface. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Initiator Group |
Networking |
Remove a NetApp initiator group with initiator group name and storage virtual machine name as the inputs. On successful execution name of the initiator group name removed is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove NetApp LUN |
Networking |
This is a task to remove a NetApp LUN. |
NetAppActiveIqUnifiedManager |
| Remove NetApp LUN Map |
Networking |
Remove a lun map with initiator group name, storage virtual machine name and lun path as the inputs. On successful execution name of the initiator group name and lun path are generated as outputs. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Smart LUN |
Storage |
Remove a LUN with LUN path and a storage virtual machine name as the inputs. On successful execution, the LUN path is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Snapshot Policy |
Storage |
This is a task to remove a NetApp snapshot policy. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Snapshot Policy Schedule |
Storage |
This is a task to remove a NetApp snapshot policy schedule |
NetAppActiveIqUnifiedManager |
| Remove NetApp Storage Virtual Machine |
Storage |
This is a task to remove a NetApp storage virtual machine. |
NetAppActiveIqUnifiedManager |
| Remove NetApp Volume Snapshot |
Storage |
This is a task to remove a NetApp volume snapshot. |
NetAppActiveIqUnifiedManager |
| Remove Netapp Volume |
Storage |
Remove a NetApp volume with volume name and storage virtual machine name as the inputs. On successful execution name of the volume removed is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove Network Port Binding from iSCSI Software Adapter |
Virtualization |
Remove virtual machine kernel adapters from the iSCSI software adapter on the selected host. The input parameters required are datacenter, host, iSCSI software adapter, and virtual machine kernel adapters. On successful execution of the task, iSCSI software adapter and virtual machine kernel adapters are generated as outputs. Removing the virtual machine kernel port bindings will also remove all active paths to the iSCSI targets. The associated datastores will become unavailable. |
VmwareVcenter |
| Remove Network from Virtual Machine |
Virtualization |
Remove virtual network interface card from a virtual machine. Requires datacenter, virtual machine and virtual NIC as inputs. On successful execution virtual machine is generated as output. |
VmwareVcenter |
| Remove Network from Virtual Machine |
Virtualization |
Remove Network from Virtual Machine |
VmwareVcenter |
| Remove Physical NICs from Distributed Virtual Switch |
Virtualization |
Removes physical network adapters from the Distributed Virtual Switch. Requires datacenter, host, distributed virtual switch, and physical network adapters as mandatory inputs. On successful execution, datacenter, host, distributed virtual switch, and physical network adapters are generated as outputs. |
VmwareVcenter |
| Remove Physical NICs from DistributedVirtualSwitch |
Virtualization |
Task to remove Physical NICs from Distributed Virtual Switch. |
VmwareVcenter |
| Remove Physical NICs from Virtual Switch |
Virtualization |
Removes physical network adapters from the virtual switch. Requires datacenter, host, virtual switch, and physical network adapters as mandatory inputs. On successful execution, datacenter, host, virtual switch, and physical network adapters are generated as outputs. |
VmwareVcenter |
| Remove Physical NICs from VirtualSwitch |
Virtualization |
Task to remove Physical NICs from Virtual Switch. |
VmwareVcenter |
| Remove Public Cloud Virtual Machine |
Virtualization |
Remove Public Cloud virtual machine |
AmazonWebService |
| Remove Server Policies from Profile |
Compute |
Disassociates given list of policies from a given profile |
IMC IMCBlade |
| Remove Server Precision Boot Device |
Compute |
Deletes the precision boot device from the server. Use this task only for servers that are not associated with server profile. For servers that are associated with profiles, change the boot order policy and deploy the server profile. |
IMC |
| Remove Server Profile |
Compute |
Deletes server profile given by user. A profile can not be deleted when a server is assigned to it unless it is incomplete. |
IMC IMCBlade |
| Remove Server from Server Profile |
Compute |
Unassigns server from server profile with profile Moref as input. On successful execution, profile status will be the output. |
IMC IMCBlade |
| Remove Standalone Server Boot Device |
Compute |
Deletes the precision boot device from the server. |
IMC |
| Remove Storage Export Policy |
Storage |
Remove a storage export policy with export policy name and storage virtual machine name as the inputs. On successful execution name of the export policy removed is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove Storage Export Policy Rule |
Storage |
Remove a storage export policy rule with export policy name and storage virtual machine name as the inputs. On successful execution, the name of the updated export policy is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove Storage FC Interface |
Storage |
Task to remove a FC interface with interface name and storage virtual machine name as the inputs. On successful execution, the FC interface name is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Storage Host |
Storage |
Remove a storage host with host name as input. Storage host is the entity used to associate initiators to storage and expose as LUNs. Host can map to different terms for Storage vendors. For NetApp ONTAP storage this maps to iGroup. On successful execution, the host name deleted is generated as output. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Remove Storage Host Group |
Storage |
Remove a Hitachi host group. |
HitachiVirtualStoragePlatform |
| Remove Storage Host Group |
Storage |
Remove a host group with host group name as input. On successful execution, name of host group that was deleted is generated as output. |
PureStorageFlashArray |
| Remove Storage Host Group |
Storage |
Remove a Hitachi host group. |
HitachiVirtualStoragePlatform |
| Remove Storage IP Interface |
Storage |
Task to remove a storage IP interface with the IP interface name and storage virtual machine name as the inputs. On successful execution, the IP interface name is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Storage LUN |
Storage |
Remove a LUN with LUN path and storage virtual machine name as the inputs. On successful execution the path for the LUN removed is generated as output. |
NetAppActiveIqUnifiedManager |
| Remove Storage LUN ID |
Storage |
Disconnect storage from Host and hence remove the LUN ID. Storage host is the entity used to associate initiators to storage and expose as LUNs. Host can map to different terms for Storage vendors. For NetApp ONTAP Storage, disconnect Storage LUN from an iGroup with LUN name and iGroup name as inputs. On successful execution iGroup name and the LUN Path are generated as outputs. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Remove Storage Pool |
Storage |
Delete a pool by specifying the pool number. |
HitachiVirtualStoragePlatform |
| Remove Storage Snapshot Policy |
Storage |
Task to remove a snapshot policy with a storage virtual machine name and snapshot policy name as the inputs. On successful execution, the name of snapshot policy removed is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Storage Snapshot Policy Schedule |
Storage |
Task to remove a snapshot policy schedule with storage virtual machine name, snapshot policy name and schedule name to be removed as the inputs. On successful execution, the name of snapshot policy is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Storage Virtual Machine |
Storage |
Task to remove a storage virtual machine with a storage virtual machine name as the input. On successful execution, the name of the storage virtual machine is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Storage Volume |
Storage |
Remove Storage Volume with Volume name as input. On successful execution, the deleted Volume name is generated as output. |
HitachiVirtualStoragePlatform NetAppActiveIqUnifiedManager PureStorageFlashArray |
| Remove Storage Volume Snapshot |
Storage |
Task to remove a volume snapshot with storage virtual machine name, volume name and the snapshot name to be removed as the inputs. On successful execution, the name of the volume snapshot removed is generated as the output. |
NetAppActiveIqUnifiedManager |
| Remove Target |
Target Management |
Unclaims the target endpoint from Intersight. When a target is unclaimed, it is immediately detached from the corresponding Intersight account. The target retains any configuration applied before the unclaim operation. You can unclaim any type of target endpoints. |
|
| Remove Terraform Remote State Consumers |
Terraform Cloud |
Removes the Remote State Consumers from the Workspace |
|
| Remove Terraform Workspace |
Terraform Cloud |
Delete the Workspace from Terraform Cloud |
|
| Remove VMFS Datastore |
Terraform Cloud |
Remove a VMFS datastore from Vmware hypervisor. |
VMwarevCenter |
| Remove VMFS Datastore |
Virtualization |
Remove VMFS datastore from selected hypervisor. Requires datacenter, cluster (or host), datastore as inputs. When a datastore is removed from a host, it is destroyed and will disappear from all hosts that have access to it. If a cluster name is provided, the datastore is removed from all hosts in the cluster. On successful execution, the datastore name, NaaId of the deleted datastore, and the LUN number are generated as outputs. |
VmwareVcenter |
| Remove VMFS Datastore |
Virtualization |
Remove a VMFS datastore from Vmware hypervisor. |
VmwareVcenter |
| Remove VMKernel Adapter from Distributed Virtual Network |
Virtualization |
Removes VMKernel adapter from the distributed virtual network. Requires datacenter, host, and kernel adapter as mandatory inputs. On successful execution, datacenter, host, and kernel adapter are generated as outputs. |
VmwareVcenter |
| Remove VMKernel Adapter from Distributed Virtual Network |
Virtualization |
Task to remove VMKernel Adapter from Distributed Virtual Network. |
VmwareVcenter |
| Remove VMKernel Adapter from Virtual Switch |
Virtualization |
Remove existing VMKernel adapter from the virtual switch. Requires datacenter, host, virtual switch, and virtual machine network as inputs. On successful execution, datacenter, host, virtual switch, and virtual machine network name are generated as outputs. |
VmwareVcenter |
| Remove VMKernel adapter from Virtual Machine Network |
Virtualization |
Task to remove vmkernel adapter. |
VmwareVcenter |
| Remove Virtual Disk |
Virtualization |
Remove a virtual disk or detach an existing disk from a virtual machine. Required fields are datacenter, virtual machine and disk uuid. On successful execution, datacenter, virtual machine, deleteFile, datastore, virtual disk details are generated as outputs. |
VmwareVcenter |
| Remove Virtual Machine |
Virtualization |
Deletes a virtual machine |
VmwareVcenter AmazonWebService |
| Remove Virtual Machine Network |
Virtualization |
Remove existing virtual machine and kernel network from the virtual switch. Requires datacenter, host, virtual switch, and virtual machine network as inputs. On successful execution, datacenter, host, virtual switch, and virtual machine network name are generated as outputs. |
VmwareVcenter |
| Remove Virtual Machine Snapshot |
Virtualization |
Remove virtual machine snapshot. Using this task user can manage the snapshots that includes deleting a single snapshot of the virtual machine and its children or deleting all the snapshots of the virtual machine. Requires datacenter, virtual machine and manage snapshot which includes delete and delete all as inputs. On successful execution, datacenter, virtual machine ,virtual machine name, snapshot name and snapshot id are generated as outputs. |
VmwareVcenter |
| Remove Virtual Machine Snapshot |
Virtualization |
Remove Virtual Machine Snapshot |
VmwareVcenter |
| Remove Virtual Machine Template |
Virtualization |
Delete virtual machine template. Requires datacenter, virtual machine template and folder as inputs. On successful execution, virtual machine template is generated as output. |
VmwareVcenter |
| Remove Virtual Switch |
Virtualization |
Remove virtual switch from the host. Requires datacenter, host and virtual switch name as inputs. On successful execution, datacenter, host and virtual switch name are generated as output. |
VmwareVcenter |
| Remove Virtual Switch |
Virtualization |
Task to remove virtual switch. |
VmwareVcenter |
| Remove Vmware Datacenter |
Virtualization |
Removes Vmware Datacenter |
VmwareVcenter |
| Remove a port from a port channel of an MDS switch |
Virtualization |
Task to remove a port from a port channel on a MDS switch |
MDSDevice |
| Remove an existing VLAN on a Nexus Switch |
Virtualization |
Task to delete a VLAN on a Nexus switch. |
NexusDevice |
| Remove an existing VSAN from a MDS switch |
Virtualization |
Task to remove a VSAN from a MDS switch. |
MDSDevice |
| Remove an existing port channel on an MDS switch |
Virtualization |
Task to delete a port channel on a MDS switch |
MDSDevice |
| Remove existing VLAN from Trunk or Access Port on a Nexus Switch |
Virtualization |
Task to remove VLAN from Trunk or Access Port on a Nexus switch. |
NexusDevice |
| Remove host from FlashArray host group |
Virtualization |
Remove Host member from FlashArray host group. |
PureStorageFlashArray |
| Remove host from FlashArray host group |
Virtualization |
Remove Host member from FlashArray host group. |
PureStorageFlashArray |
| Remove host from hypervisor |
Virtualization |
Remove host from selected hypervisor |
VmwareVcenter |
| Remove iSCSI Server |
Virtualization |
Removes an iSCSI server from an iSCSI software adapter. The input parameters required are datacenter, host, iSCSI software adapter, iSCSI server and iSCSI server port. On successful execution , iSCSI server is generated as output. |
VmwareVcenter |
| Remove iSCSI Server |
Virtualization |
Task to remove iSCSI server from iSCSI Software Adapter |
VmwareVcenter |
| Remove network port binding from the iSCSI Software Adapter |
Virtualization |
Remove network port binding from the iSCSI software adapter on the given host. |
VmwareVcenter |
| Remove virtual disk of virtual machine. |
Virtualization |
Remove virtual disk of virtual machine. |
VmwareVcenter |
| Removes DNS from a MDS Switch |
Virtualization |
Removes DNS from a MDS switch. |
MDSDevice |
| Rename Hypervisor Datacenter |
Virtualization |
Rename a datacenter on a selected hypervisor. If folder is specified, the datacenter must exist within the folder. On successful execution, both old name and new name of datacenter, as well as the name of the folder are generated as outputs. |
VmwareVcenter |
| Rename NetApp Volume Snapshot |
Virtualization |
This is a task to rename a NetApp volume snapshot. |
NetAppActiveIqUnifiedManager |
| Rename Storage Volume Snapshot |
Storage |
Task to rename a volume snapshot with a volume name, storage virtual machine name, snapshot name and new snapshot name as the inputs. On successful execution, the new name of volume snapshot is generated as the output. |
NetAppActiveIqUnifiedManager |
| Rename Vmware Datacenter |
Storage |
Rename an existing Datacenter on a selected Hypervisor |
VmwareVcenter |
| Restart IMC |
Compute |
Cisco IMC will be rebooted and will be temporarily unavailable. |
IMC IMCBlade |
| RestartImcImpl |
Compute |
Cisco IMC will be rebooted and will be temporarily unavailable. |
IMC IMCBlade |
| RestartImcImpl |
Compute |
Cisco IMC will be rebooted and will be temporarily unavailable. |
IMC IMCBlade |
| Restore Hitachi Snapshot Data |
Storage |
Restore the data of the primary volume by using the specified snapshot data. When the pair is restored, the data of the snapshot specified for the primary volume is overwritten. |
HitachiVirtualStoragePlatform |
| Set DNS on a MDS Switch |
Storage |
Set DNS on a MDS switch. |
MDSDevice |
| Set Host Maintenance Mode |
Virtualization |
Perform enter or exit maintenance mode operation on a given host. A host in maintenance mode does not perform any activities on virtual machines, including virtual machine provisioning. Virtual machines must either be powered off or migrated to another host. |
VmwareVcenter |
| Set Host Maintenance Mode |
Virtualization |
Perform enter or exit maintenance mode operation on a given host. A host in maintenance mode does not perform any activities on virtual machines, including virtual machine provisioning. Virtual machines must either be powered off or migrated to another host. |
VmwareVcenter |
| Set HyperFlex AP Controller Node PowerState |
Virtualization |
Set HyperFlex AP Controller Node PowerState |
|
| Set HyperFlex AP VirtualMachine PowerState |
Virtualization |
Set HyperFlex AP VirtualMachine PowerState |
|
| Set HyperFlex AP VirtualMachine PowerState |
Virtualization |
Set HyperFlex AP VirtualMachine PowerState |
|
| Set IWE VirtualMachine PowerState |
Virtualization |
Set IWE VirtualMachine PowerState |
|
| Set IWE VirtualMachine PowerState |
Virtualization |
Set IWE VirtualMachine PowerState |
|
| Set MDS DNS Server |
Networking |
Sets DNS on a MDS switch. |
MDSDevice |
| Set MDS Feature State |
Networking |
Sets feature administrative state to enabled/disabled on a MDS switch |
MDSDevice |
| Set MDS Hostname |
Networking |
Sets switch hostname on a MDS switch. The input parameters required are MDS switch and hostname. On successful execution MDS switch and hostname are generated as outputs. |
|
| Set MDS NTP Server |
Networking |
Sets NTP server on the MDS switch. |
MDSDevice |
| Set MDS Port Channel State |
Networking |
Sets the administrative state of port channel on the MDS switch |
MDSDevice |
| Set MDS Port State |
Networking |
Sets the administrative state of the port on a MDS switch. |
MDSDevice |
| Set NX Feature State |
Networking |
Sets feature administrative state to enabled/disabled on a Nexus switch. |
NexusDevice |
| Set NX Hostname |
Networking |
Sets switch hostname on a Nexus switch. The input parameters required are Nexus switch and hostname. On successful execution Nexus switch and hostname are generated as outputs. |
|
| Set NX MTU |
Networking |
Sets MTU on a port or port channel or Nexus switch. The input parameters required are port or port channel or Nexus switch and MTU. On successful execution, MTU and port or port channel or switch (as per the selection) are generated as outputs. |
NexusDevice |
| Set NX Port Mode |
Networking |
Sets port mode on a Nexus switch port. The input parameters required are port, layer and mode. On successful execution, port and mode are generated as outputs. |
NexusDevice |
| Set NX Port Speed |
Networking |
Sets speed on a Nexus switch port. The input parameters required are port and speed. On successful execution, selected port and speed are generated as outputs. |
NexusDevice |
| Set NX Port State |
Networking |
Sets the administrative state of the port on a Nexus switch. |
NexusDevice |
| Set NX Trunk Port |
Networking |
Sets the trunk port on a Nexus switch. |
NexusDevice |
| Set NX VLAN |
Networking |
Creates a VLAN or Updates existing VLAN on a Nexus switch. |
NexusDevice |
| Set NX VLAN Interface |
Networking |
Sets VLAN Interface on a Nexus switch. The input parameters required are VLAN ID, IP address, IP subnet and description. On successful execution, selected VLAN ID is generated as output. |
NexusDevice |
| Set NX VLAN State |
Networking |
Sets the administrative state of the VLAN on a Nexus switch. |
NexusDevice |
| Set Power State of HyperFlex Controller Node |
Hyperflex |
Set the power state of HyperFlex controller node |
|
| Set Power State of Virtual Machine |
Hyperflex |
Set the power state of a virtual machine. |
VmwareVcenter |
| Set Power State of Virtual Machine |
Hyperflex |
Set the power state of a virtual machine. |
VmwareVcenter |
| Set Server One Time Boot Device |
Compute |
Configures the chosen device as the one-time boot device for the server. This device will be used when the server powers on the next time. If no device is chosen, It clears the one time boot configuration. |
IMC |
| Set Server Physical Drive State |
Compute |
Enables a single physical drive or multiple physical drives to switch between Unconfigured Good and JBOD states. |
IMC IMCBlade |
| Set Server Power State |
Compute |
Sets Server Power state to Power On, Power Off, Power Cycle or Hard Reset. |
IMC IMCBlade |
| Set Server to Server Profile |
Compute |
Sets server to server profile with server and profile as inputs. If the selected server is already part of another profile or if the selected profile has a different server previously assigned to it, then an error is displayed. On successful execution, the profile status will be provided as output. |
IMC IMCBlade |
| Set Trunk Port on a Nexus Switch |
Compute |
Task to set trunk port on a Nexus switch. |
NexusDevice |
| Set Virtual Machine Power State |
Virtualization |
Configure the power state of a virtual machine. The available power states depend on the selected hypervisor platform. |
VmwareVcenter AmazonWebService |
| Set Virtual Machine Snapshot |
Virtualization |
Revert snapshot of a virtual machine. This task reverts the virtual machine to a selected snapshot. Requires datacenter, virtual machine and snapshot as inputs. On successful execution, datacenter, virtual machine, virtual machine name, snapshot name, snapshot id, previous current snapshot name and previous current snapshot id are generated as outputs. |
VmwareVcenter |
| Set Virtual Machine Snapshot |
Virtualization |
Set Virtual Machine Snapshot |
VmwareVcenter |
| SetFIManagedServerOneTimeBootDeviceImpl |
Virtualization |
Configures the chosen device as the one-time boot device for the FI Managed server. This device will be used when the server powers on the next time. |
|
| SetFIManagedServerOneTimeBootDeviceImpl |
Virtualization |
Configures the chosen device as the one-time boot device for the FI Managed server. This device will be used when the server powers on the next time. |
|
| SetServerPowerStateImpl |
Virtualization |
Sets Server Power state to Power On, Power Off, Power Cycle or Hard Reset. |
IMC IMCBlade |
| SetServerPowerStateImpl |
Virtualization |
Sets Server Power state to Power On, Power Off, Power Cycle or Hard Reset. |
IMC IMCBlade |
| SetStandaloneServerOneTimeBootDeviceImpl |
Virtualization |
Configures the chosen device as the one-time boot device for the server. This device will be used when the server powers on the next time. |
IMC |
| SetStandaloneServerOneTimeBootDeviceImpl |
Virtualization |
Configures the chosen device as the one-time boot device for the server. This device will be used when the server powers on the next time. |
IMC |
| Sets NTP server on the MDS Switch |
Virtualization |
Sets NTP server on the MDS switch. |
MDSDevice |
| Sets Port Administrative State of a Nexus Switch |
Virtualization |
Task to set port state of a Nexus switch. |
NexusDevice |
| Sets Port State on MDS Switch |
Virtualization |
Sets administrative state of the port on MDS switch |
MDSDevice |
| Sets VLAN Administrative State of Nexus Switch |
Virtualization |
Task to set VLAN state of a Nexus switch. |
NexusDevice |
| Sets feature administrative state to enabled/disabled on a MDS Switch |
Virtualization |
Sets feature administrative state to enabled/disabled on a MDS switch. |
MDSDevice |
| Sets feature administrative state to enabled/disabled on a Nexus Switch |
Virtualization |
Sets feature administrative state to enabled/disabled on a Nexus switch. |
NexusDevice |
| Sets the administrative state of port channel on a MDS switch. |
Virtualization |
Sets the administrative state of port channel on a MDS switch. |
MDSDevice |
| Sleep Task |
CoreTasks |
Pauses the current workflow for the specified duration. |
|
| Start New Terraform Plan |
Terraform Cloud |
Starts a new plan or destroys a plan in the given Terraform Workspace |
|
| Stop Server Operating System |
Compute |
The host operating system on the server will be shut down. |
IMC IMCBlade |
| StopServerOperatingSystemImpl |
Compute |
The host operating system on the server will be shut down. |
IMC IMCBlade |
| StopServerOperatingSystemImpl |
Compute |
The host operating system on the server will be shut down. |
IMC IMCBlade |
| Update Terraform Sensitive Variable |
Terraform Cloud |
Update sensitive variable in Terraform Workspace |
|
| Update Terraform Variable |
Terraform Cloud |
Update variable in Terraform Workspace |
|