Configuring EIGRP stub

Configuring EIGRP stub

POST http://<mgmt_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "eigrpEntity": {
          "children": [
            {
              "eigrpInst": {
                "attributes": {
                  "name": "router_1"
                },
                "children": [
                  {
                    "eigrpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "eigrpDomAf": {
                            "attributes": {
                              "type": "ipv4-ucast"
                            },
                            "children": [
                              {
                                "eigrpStubP": {
                                  "attributes": {
                                    "direct": "yes",
                                    "external": "yes",
                                    "receiveOnly": "no",
                                    "rtMap": "one",
                                    "static": "yes",
                                    "summary": "yes"
                                  }
                                }
                              }
                            ]
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

        <System xmlns="http://cisco.com/ns/yang/cisco-nx-os-device">
        <eigrp-items>
          <inst-items>
            <Inst-list>
              <name>router_1</name>
              <dom-items>
                <Dom-list>
                  <name>default</name>
                  <af-items>
                    <DomAf-list>
                      <type>ipv4-ucast</type>
                      <stub-items>
                        <direct>true</direct>
                        <static>true</static>
                        <summary>true</summary>
                        <external>true</external>
                        <rtMap>one</rtMap>
                      </stub-items>
                    </DomAf-list>
                  </af-items>
                </Dom-list>
              </dom-items>
            </Inst-list>
          </inst-items>
        </eigrp-items>
      </System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

stub [{[direct | connected | static | summary] [redistributed]}+ [leak-map <leak-map>] | {receive-only}]

Note: The property information for this example was added in release 10.2(2)F.

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

eigrpStubP Properties

The following table contains information about the eigrpStubP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html