Disabling MPLS Forwarding for IP
Configuring Administrative Shutdown of the LDP Protocol
Configuring Administrative Shutdown of the LDP Protocol
POST http://<mgmt0_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"mplsldpLDP": {
"attributes": {
"adminSt": "disabled"
}}}]}}
{
imdata:[]
}
<System>
<ldp-items>
<adminSt>disabled</adminSt>
</ldp-items>
</System>
Note: This example was added in Release 9.3(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
mpls ldp configuration
shutdown
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
MO | DN |
---|---|
topSystem | sys |
mplsldpLDP | sys/ldp |
mplsldpLDP Properties
The following table contains information about the mplsldpLDP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
Property Name | Data Type | Description | Values |
---|---|---|---|
adminSt | nw:AdminSt (scalar:Enum8) | The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
Deleting Administrative Shutdown of the LDP Protocol
Deleting Administrative Shutdown of the LDP Protocol
POST http://<mgmt0_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"mplsldpLDP": {
"attributes": {
"adminSt": "enabled"
}}}]}}
{
imdata:[]
}
<System>
<ldp-items>
<adminSt>enabled</adminSt>
</ldp-items>
</System>
Note: This example was added in Release 9.3(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
mpls ldp configuration
no shutdown
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
MO | DN |
---|---|
topSystem | sys |
mplsldpLDP | sys/ldp |
mplsldpLDP Properties
The following table contains information about the mplsldpLDP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
Property Name | Data Type | Description | Values |
---|---|---|---|
adminSt | nw:AdminSt (scalar:Enum8) | The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: