Configuring Hardware Profile Settings

Configuring ECMP Resilient Mode

Configuring ECMP Resilient Mode

POST http://<mgmt0_IP>/api/mo/sys/pltfm.json

{
  "platformEntity": {
    "children": [
      {
        "platformEcmp": {
          "attributes": {
            "ecmpResilientMode": "enabled"
}}}]}}

{
    imdata:[]
}

<System>
  <pltfm-items>
    <ecmp-items>
      <ecmpResilientMode>enabled</ecmpResilientMode>
    </ecmp-items>
  </pltfm-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

hardware profile ecmp resilient

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
platformEcmp	sys/pltfm/ecmp
platformEntity	sys/pltfm

platformEcmp Properties

The following table contains information about the platformEcmp properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
ecmpResilientMode	platform:AdminState (nw:AdminSt)	Configure ECMP resilient mode	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting ECMP Resilient Mode

Deleting ECMP Resilient Mode

POST http://<mgmt0_IP>/api/mo/sys/pltfm.json

{
  "platformEntity": {
    "children": [
      {
        "platformEcmp": {
          "attributes": {
            "ecmpResilientMode": "disabled"
}}}]}}

{
    imdata:[]
}

<System>
  <pltfm-items>
    <ecmp-items>
      <ecmpResilientMode>disabled</ecmpResilientMode>
    </ecmp-items>
  </pltfm-items>
</System>