Advanced Apphosting Features

Overriding App Resource Configuration

Overriding App Resource Configuration

POST http://<mgmt0_IP>/api/mo/sys/apphosting/appconf-<app-id>/resource.json

{
    "apphostingAppResourceCfg" : {
        "attributes" : {
            "adminSt" : "enabled",
            "cpu" : "7400",
            "memory" : "2048"
         }
    }
}

{
    "apphostingAppResourceCfg" : {
        "attributes" : {
            "adminSt" : "disabled",
            "cpu" : "7400",
            "memory" : "2048"
        }
    }
}

{
    imdata:[]
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload.

Configure application resource

app-hosting appid te_app
 app-resource profile custom
  cpu 7400
  memory 2408
  exit

Unconfigure application resource

app-hosting appid te_app
 app-resource profile custom
  no cpu 7400
  no memory 2408
  exit

Note: The property information for this example was added in release 10.3(1)F.

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

appHostingAppResourceCfg Properties

The following table contains information about the appHostingAppResourceCfg properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Supporting Third-Party Docker Applications

Supporting Third-Party Docker Applications    

POST http://<mgmt0_IP>/api/mo/sys/apphosting/globalcfg.json

{
      "apphostingAppGlobalCfg" : {
            "attributes" : {
            "adminSt":"enabled",
            "signVerify" : "disable"
 
}}}


{
      "apphostingAppGlobalCfg" : {
            "attributes" : {
            "adminSt":"disabled",
            "signVerify" : "disable"
 
}}}

{
    imdata:[]
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload.

app-hosting signed-verification disable
app-hosting signed-verification enable

Note: The property information for this example was added in release 10.3(1)F.

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

appHostingAppGlobalCfg Properties

The following table contains information about the appHostingAppGlobalCfg properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Adjusting Application Hosting Disk Size

Adjusting Application Hosting Disk Size

POST http://<mgmt0_IP>/api/mo/sys/apphosting/globalcfg.json

{
      "apphostingAppGlobalCfg" : {
            "attributes" : {
            "adminSt":"enabled",
            "storageLimit" : "500"
 
}}}

{
      "apphostingAppGlobalCfg" : {
            "attributes" : {
            "adminSt":"disabled",
            "storageLimit" : "500"
 
}}}

{
    imdata:[]
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload.

app-hosting bootflash backend storage limit 500
no app-hosting bootflash backend storage limit 500

Note: The property information for this example was added in release 10.3(1)F.

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

appHostingAppGlobalCfg Properties

The following table contains information about the appHostingAppGlobalCfg properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html