Configuring IPv4 Routing Information

Configuring an IPv4 Multicast Hold-Down Period

Configuring an IPv4 Multicast Hold-Down Period

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "holdEnable": "enabled",
                  "holddown": "123"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <holdEnable>enabled</holdEnable>
            <holddown>123</holddown>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release 7.0(3)I7(2).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ipv4 routing multicast holddown 123

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
mribInst	sys/mrib/inst
mribDom	sys/mrib/inst/dom-{name}
mribConfig	sys/mrib/inst/dom-{name}/config

mribDom Properties

The following table contains information about the mribDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

mribConfig Properties

The following table contains information about the mribConfig properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
holdEnable	mrib:HoldAdminSt (scalar:Enum8)	Holddown Enable	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled
holddown	mrib:HoldDownType (scalar:Uint16)	holddown second	RANGE: [0 , 3600] DEFAULT: 270

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling an IPv4 Multicast Hold-Down Period

Disabling an IPv4 Multicast Hold-Down Period

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "holdEnable": "enabled",
                  "holddown": "210"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <holdEnable>enabled</holdEnable>
            <holddown>210</holddown>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>