Configuring Flow Timeout

Configuring a Flow Timeout

Configuring a Flow Timeout

POST http://<mgmt0_IP>/api/mo/sys/hwtelemetry/netflow.json

{
  "netflowNetflow": {
    "children": [
      {
        "netflowInst": {
          "attributes": {
            "mode": "netflow",
            "timeOut": "20"
          }
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <hwtelemetry-items>
    <netflow-items>
      <inst-items>
        <Inst-list>
          <mode>netflow</mode>
          <timeOut>20</timeOut>
        </Inst-list>
      </inst-items>
    </netflow-items>
  </hwtelemetry-items>
</System>

Note: This example was added in Release 9.2(2).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

flow timeout 20

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Flow Timeout Configuration

Deleting a Flow Timeout Configuration

POST http://<mgmt0_IP>/api/mo/sys/hwtelemetry/netflow.json

{
  "netflowNetflow": {
    "children": [
      {
        "netflowInst": {
          "attributes": {
            "mode": "netflow",
            "timeOut": "10"
          }
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <hwtelemetry-items>
    <netflow-items>
      <inst-items>
        <Inst-list>
          <mode>netflow</mode>
          <timeOut>10</timeOut>
        </Inst-list>
      </inst-items>
    </netflow-items>
  </hwtelemetry-items>
</System>

Note: This example was added in Release 9.2(2).

CLI Commands

no flow timeout 20

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html