Configuring Global IP Multicast Parameters

Disabling ECMP Multicast Load Splitting

Disabling ECMP Multicast Load Splitting

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "none",
                  "ModeEnable": "enabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>none</Mode>
            <ModeEnable>enabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip multicast multipath none

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the ECMP Multicast Load Splitting Configuration

Deleting the ECMP Multicast Load Splitting Configuration

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "none",
                  "ModeEnable": "disabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>none</Mode>
            <ModeEnable>disabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

no ip multicast multipath none

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring a Hash Based on the Source and Group

Configuring a Hash Based on the Source and Group

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "legacy",
                  "ModeEnable": "enabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>legacy</Mode>
            <ModeEnable>enabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

ip multicast multipath legacy

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting the Configuration for a Hash Based on the Source and Group

Deleting the Configuration for a Hash Based on the Source and Group

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "legacy",
                  "ModeEnable": "disabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>legacy</Mode>
            <ModeEnable>disabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

no ip multicast multipath legacy

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring a Hash Based on the Source, Group, and Next-Hop Address

Configuring a Hash Based on the Source, Group, and Next-Hop Address

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "s-g-hash",
                  "ModeEnable": "enabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>s-g-hash</Mode>
            <ModeEnable>enabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

ip multicast multipath s-g-hash next-hop-based

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting the Configuration for a Hash Based on the Source, Group, and Next-Hop Address

Deleting the Configuration for a Hash Based on the Source, Group, and Next-Hop Address

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "s-g-hash",
                  "ModeEnable": "disabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>s-g-hash</Mode>
            <ModeEnable>disabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

no ip multicast multipath s-g-hash next-hop-based

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring a Resilient RPF Interface

Configuring a Resilient RPF Interface

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "resilient",
                  "ModeEnable": "enabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>resilient</Mode>
            <ModeEnable>enabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

ip multicast multipath resilient

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting a Resilient RPF Interface Configuration

Deleting a Resilient RPF Interface Configuration

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "resilient",
                  "ModeEnable": "disabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>resilient</Mode>
            <ModeEnable>disabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

no ip multicast multipath resilient

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring an NBM-controlled RPF Interface

Configuring an NBM-controlled RPF Interface

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "nbm",
                  "ModeEnable": "enabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>nbm</Mode>
            <ModeEnable>enabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

ip multicast multipath nbm

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting an NBM-controlled RPF Interface Configuration

Deleting an NBM-controlled RPF Interface Configuration

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "Mode": "nbm",
                  "ModeEnable": "disabled"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <Mode>nbm</Mode>
            <ModeEnable>disabled</ModeEnable>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

no ip multicast multipath nbm

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html