Configuring IGMP Under a VLAN Configuration

Configuring a MAC Address Table

Configuring a MAC Address Table

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "bdEntity": {
          "children": [
            {
              "l2VlanConfig": {
                "attributes": {
                  "accEncap": "vlan-1"
                }
              }
            }
          ]
        }
      },
      {
        "igmpsnoopEntity": {
          "children": [
            {
              "igmpsnoopInst": {
                "children": [
                  {
                    "igmpsnoopDom": {
                      "children": [
                        {
                          "igmpsnoopVlan": {
                            "attributes": {
                              "vlanid": "vlan1"
                            },
                            "children": [
                              {
                                "igmpsnoopIgmpsnBase": {
                                  "attributes": {
                                    "lookupMac": "yes"
                                  }
                                }
                              }
                            ]
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bd-items>
    <vlanconfig-items>
      <VlanConfig-list>
        <accEncap>vlan-1</accEncap>
      </VlanConfig-list>
    </vlanconfig-items>
  </bd-items>
  <igmpsnoop-items>
    <inst-items>
      <dom-items>
        <vlan-items>
          <Vlan-list>
            <vlanid>vlan1</vlanid>
            <igmpsnbase-items>
              <lookupMac>true</lookupMac>
            </igmpsnbase-items>
          </Vlan-list>
        </vlan-items>
      </dom-items>
    </inst-items>
  </igmpsnoop-items>
</System>

Note: This example was added in Release 9.2(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

vlan configuration 1
layer-2 multicast lookup mac

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a MAC Address Table

Deleting a MAC Address Table

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "bdEntity": {
          "children": [
            {
              "l2VlanConfig": {
                "attributes": {
                  "accEncap": "vlan-1"
                }
              }
            }
          ]
        }
      },
      {
        "igmpsnoopEntity": {
          "children": [
            {
              "igmpsnoopInst": {
                "children": [
                  {
                    "igmpsnoopDom": {
                      "children": [
                        {
                          "igmpsnoopVlan": {
                            "attributes": {
                              "vlanid": "vlan1"
                            },
                            "children": [
                              {
                                "igmpsnoopIgmpsnBase": {
                                  "attributes": {
                                    "lookupMac": "no"
                                  }
                                }
                              }
                            ]
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bd-items>
    <vlanconfig-items>
      <VlanConfig-list>
        <accEncap>vlan-1</accEncap>
      </VlanConfig-list>
    </vlanconfig-items>
  </bd-items>
  <igmpsnoop-items>
    <inst-items>
      <dom-items>
        <vlan-items>
          <Vlan-list>
            <vlanid>vlan1</vlanid>
            <igmpsnbase-items>
              <lookupMac>false</lookupMac>
            </igmpsnbase-items>
          </Vlan-list>
        </vlan-items>
      </dom-items>
    </inst-items>
  </igmpsnoop-items>
</System>

Note: This example was added in Release 9.2(1).

CLI Commands

vlan configuration 1
no layer-2 multicast lookup mac

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html