Configuring IGMP Under a VRF Interface

This section contains payload examples and CLIs to demonstrate how to use the NX-API REST API to perform configurations on Cisco Nexus 3000 and 9000 Series switches and to show how the REST APIs correspond to the CLI commands.

For more information, see the Cisco Nexus 9000 Series NX-OS Multicast Routing Configuration Guide.

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-installation-and-configuration-guides-list.html/

Translating IGMPv1/v2 Reports to (S,G) Route Entries Under a VRF Interface

Translating IGMPv1/v2 Reports to (S,G) Route Entries Under a VRF Interface

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "igmpEntity": {
          "children": [
            {
              "igmpInst": {
                "children": [
                  {
                    "igmpDom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "igmpSSMXlate": {
                            "attributes": {
                              "grpPfx": "232.0.0.0/8",
                              "srcAddr": "10.1.1.1/32"
}}}]}}]}}]}},{
        "l3Inst": {
          "attributes": {
            "name": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <igmp-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <ssmxlate-items>
            <SSMXlate-list>
              <srcAddr>10.1.1.1/32</srcAddr>
              <grpPfx>232.0.0.0/8</grpPfx>
            </SSMXlate-list>
          </ssmxlate-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </igmp-items>
  <inst-items>
    <Inst-list>
      <name>VRF_1</name>
    </Inst-list>
  </inst-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

interface ethernet 1/2-3
vrf context VRF_1
ip igmp ssm-translate 232.0.0.0/8 10.1.1.1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling the Translation of IGMPv1/v2 Reports to (S,G) Route Entries Under a VRF Interface

Disabling the Translation of IGMPv1/v2 Reports to (S,G) Route Entries Under a VRF Interface

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "igmpEntity": {
          "children": [
            {
              "igmpInst": {
                "children": [
                  {
                    "igmpDom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "igmpSSMXlate": {
                            "attributes": {
                              "grpPfx": "232.0.0.0/8",
                              "srcAddr": "10.1.1.1/32",
                              "status": "deleted"
}}}]}}]}}]}},{
        "l3Inst": {
          "attributes": {
            "name": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <igmp-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <ssmxlate-items>
            <SSMXlate-list xc:operation="delete">
              <srcAddr>10.1.1.1/32</srcAddr>
              <grpPfx>232.0.0.0/8</grpPfx>
            </SSMXlate-list>
          </ssmxlate-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </igmp-items>
  <inst-items>
    <Inst-list>
      <name>VRF_1</name>
    </Inst-list>
  </inst-items>
</System>

Note: This example was added in Release Cisco NX-OS Release 7.0(3)I7(2).

CLI Commands

interface ethernet 1/2-3
vrf context VRF_1
no ip igmp ssm-translate 232.0.0.0/8 10.1.1.1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/