Configuring IP Routing Information

Configuring an IP Multicast Hold-Down Period

Configuring an IP Multicast Hold-Down Period

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "holdEnable": "enabled",
                  "holddown": "123"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <holdEnable>enabled</holdEnable>
            <holddown>123</holddown>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release 7.0(3)I7(2).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip routing multicast holddown 123

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling an IP Multicast Hold-Down Period

Disabling an IP Multicast Hold-Down Period

POST http://<mgmt0_IP>/api/mo/sys/mrib/inst.json

{
  "mribInst": {
    "children": [
      {
        "mribDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "mribConfig": {
                "attributes": {
                  "holdEnable": "enabled",
                  "holddown": "210"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <mrib-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <config-items>
            <holdEnable>enabled</holdEnable>
            <holddown>210</holddown>
          </config-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </mrib-items>
</System>

Note: This example was added in Release 7.0(3)I7(2).

CLI Commands

no ip routing multicast holddown 123

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html