Configuring NetFlow on a VLAN
Configuring a Flow Monitor for IPv4 Ingress Traffic
Configuring a Flow Monitor for IPv4 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"interfaceEntity": {
"children": [
{
"sviIf": {
"attributes": {
"id": "vlan1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "151060481"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<intf-items>
<svi-items>
<If-list>
<id>vlan1</id>
</If-list>
</svi-items>
</intf-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>151060481</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list>
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
interface vlan 1
ip flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Flow Monitor for IPv4 Ingress Traffic
Deleting a Flow Monitor for IPv4 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"interfaceEntity": {
"children": [
{
"sviIf": {
"attributes": {
"id": "vlan1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "151060481"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"status": "deleted",
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<intf-items>
<svi-items>
<If-list>
<id>vlan1</id>
</If-list>
</svi-items>
</intf-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>151060481</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list xc:operation="delete">
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
interface vlan 1
no ip flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Flow Monitor for IPv6 Ingress Traffic
Configuring a Flow Monitor for IPv6 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"interfaceEntity": {
"children": [
{
"sviIf": {
"attributes": {
"id": "vlan1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "151060481"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<intf-items>
<svi-items>
<If-list>
<id>vlan1</id>
</If-list>
</svi-items>
</intf-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>151060481</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list>
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
interface vlan 1
ipv6 flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Flow Monitor for IPv6 Ingress Traffic
Deleting a Flow Monitor for IPv6 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"interfaceEntity": {
"children": [
{
"sviIf": {
"attributes": {
"id": "vlan1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "151060481"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"status": "deleted",
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<intf-items>
<svi-items>
<If-list>
<id>vlan1</id>
</If-list>
</svi-items>
</intf-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>151060481</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list xc:operation="delete">
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
interface vlan 1
no ipv6 flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Flow Monitor for IPv4 Ingress Traffic
Configuring a Flow Monitor for IPv4 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys/hwtelemetry/netflow.json{
"topSystem": {
"children": [
{
"bdEntity": {
"children": [
{
"l2VlanConfig": {
"attributes": {
"accEncap": "vlan-1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "1"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<bd-items>
<vlanconfig-items>
<VlanConfig-list>
<accEncap>vlan-1</accEncap>
</VlanConfig-list>
</vlanconfig-items>
</bd-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>1</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list>
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
vlan configuration 1
ip flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Flow Monitor for IPv4 Ingress Traffic
Deleting a Flow Monitor for IPv4 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"bdEntity": {
"children": [
{
"l2VlanConfig": {
"attributes": {
"accEncap": "vlan-1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "1"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"status": "deleted",
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<bd-items>
<vlanconfig-items>
<VlanConfig-list>
<accEncap>vlan-1</accEncap>
</VlanConfig-list>
</vlanconfig-items>
</bd-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>1</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list xc:operation="delete">
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
vlan configuration 1
no ip flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Flow Monitor for IPv6 Ingress Traffic
Configuring a Flow Monitor for IPv6 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"bdEntity": {
"children": [
{
"l2VlanConfig": {
"attributes": {
"accEncap": "vlan-1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "1"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<bd-items>
<vlanconfig-items>
<VlanConfig-list>
<accEncap>vlan-1</accEncap>
</VlanConfig-list>
</vlanconfig-items>
</bd-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>1</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list>
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
vlan configuration 1
ipv6 flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Flow Monitor for IPv6 Ingress Traffic
Deleting a Flow Monitor for IPv6 Ingress TrafficPOST http://<mgmt0_IP>/api/mo/sys.json{
"topSystem": {
"children": [
{
"bdEntity": {
"children": [
{
"l2VlanConfig": {
"attributes": {
"accEncap": "vlan-1"
}
}
}
]
}
},
{
"analyticsHwTelemetry": {
"children": [
{
"netflowNetflow": {
"children": [
{
"netflowInst": {
"attributes": {
"mode": "netflow"
},
"children": [
{
"netflowFwdInstTarget": {
"attributes": {
"id": "1"
},
"children": [
{
"netflowRsMonitorAtt": {
"attributes": {
"status": "deleted",
"tDn": "sys/hwtelemetry/netflow/inst-netflow/monitor-mon_1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
]
}
}{
imdata:[]
}<System>
<bd-items>
<vlanconfig-items>
<VlanConfig-list>
<accEncap>vlan-1</accEncap>
</VlanConfig-list>
</vlanconfig-items>
</bd-items>
<hwtelemetry-items>
<netflow-items>
<inst-items>
<Inst-list>
<mode>netflow</mode>
<fwdinst-items>
<FwdInstTarget-list>
<id>1</id>
<rsmonitorAtt-items>
<RsMonitorAtt-list xc:operation="delete">
<tDn>/System/hwtelemetry-items/netflow-items/inst-items/Inst-list[mode='netflow']/monitor-items/Monitor-list[name='mon_1']</tDn>
</RsMonitorAtt-list>
</rsmonitorAtt-items>
</FwdInstTarget-list>
</fwdinst-items>
</Inst-list>
</inst-items>
</netflow-items>
</hwtelemetry-items>
</System>Note: This example was added in Release 9.2(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
vlan configuration 1
no ipv6 flow monitor mon_1 input
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference:
https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html