Configuring Secure System Message Logging (TLS)

Configuring Auth as the Facility to Use When Forwarding to the Server

Configuring Auth as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "auth",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>auth</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility auth

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Auth as the Facility to Use When Forwarding to the Server

Deleting Auth as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility auth

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Authpriv as the Facility to Use When Forwarding to the Server

Configuring Authpriv as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "authpriv",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>authpriv</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility authpriv

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Authpriv as the Facility to Use When Forwarding to the Server

Deleting Authpriv as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility authpriv

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Cron as the Facility to Use When Forwarding to the Server

Configuring Cron as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "cron",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>cron</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility cron

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Cron as the Facility to Use When Forwarding to the Server

Deleting Cron as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility cron

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Daemon as the Facility to Use When Forwarding to the Server

Configuring Daemon as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "daemon",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>daemon</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility daemon

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Daemon as the Facility to Use When Forwarding to the Server

Deleting Daemon as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility daemon

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring FTP as the Facility to Use When Forwarding to the Server

Configuring FTP as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "ftp",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>ftp</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility ftp

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting FTP as the Facility to Use When Forwarding to the Server

Deleting FTP as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility ftp

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Kernel as the Facility to Use When Forwarding to the Server

Configuring Kernel as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "kern",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>kern</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility kernel

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Kernel as the Facility to Use When Forwarding to the Server

Deleting Kernel as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility kernel

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local0 as the Facility to Use When Forwarding to the Server

Configuring Local0 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local0",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local0</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local0

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local0 as the Facility to Use When Forwarding to the Server

Deleting Local0 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local0

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local1 as the Facility to Use When Forwarding to the Server

Configuring Local1 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local1",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local1</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local1 as the Facility to Use When Forwarding to the Server

Deleting Local1 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local2 as the Facility to Use When Forwarding to the Server

Configuring Local2 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local2",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local2</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local2

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local2 as the Facility to Use When Forwarding to the Server

Deleting Local2 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local2

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local3 as the Facility to Use When Forwarding to the Server

Configuring Local3 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local3",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local3</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local3

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local3 as the Facility to Use When Forwarding to the Server

Deleting Local3 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local3

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local4 as the Facility to Use When Forwarding to the Server

Configuring Local4 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local4",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local4</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local4

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local4 as the Facility to Use When Forwarding to the Server

Deleting Local4 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local4

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local5 as the Facility to Use When Forwarding to the Server

Configuring Local5 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local5",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local5</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local5

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local5 as the Facility to Use When Forwarding to the Server

Deleting Local5 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local5

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local6 as the Facility to Use When Forwarding to the Server

Configuring Local6 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local6",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local6</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local6

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local6 as the Facility to Use When Forwarding to the Server

Deleting Local6 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local6

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Local7 as the Facility to Use When Forwarding to the Server

Configuring Local7 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "local7",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>local7</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local7

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Local7 as the Facility to Use When Forwarding to the Server

Deleting Local7 as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility local7

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring LPR as the Facility to Use When Forwarding to the Server

Configuring LPR as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "lpr",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>lpr</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility lpr

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting LPR as the Facility to Use When Forwarding to the Server

Deleting LPR as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility lpr

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Mail as the Facility to Use When Forwarding to the Server

Configuring Mail as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "mail",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>mail</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility mail

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Mail as the Facility to Use When Forwarding to the Server

Deleting Mail as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility mail

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring News as the Facility to Use When Forwarding to the Server

Configuring News as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "news",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>news</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility news

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting News as the Facility to Use When Forwarding to the Server

Deleting News as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility news

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring Syslog as the Facility to Use When Forwarding to the Server

Configuring Syslog as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "syslog",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>syslog</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility syslog

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting Syslog as the Facility to Use When Forwarding to the Server

Deleting Syslog as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility syslog

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring User as the Facility to Use When Forwarding to the Server

Configuring User as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "user",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>user</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility user

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting User as the Facility to Use When Forwarding to the Server

Deleting User as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility user

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Configuring UUCP as the Facility to Use When Forwarding to the Server

Configuring UUCP as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "forwardingFacility": "uucp",
            "host": "host0",
            "port": "123",
            "severity": "notifications",
            "transport": "tls",
            "trustpointClientIdentity": "TrustPointLabel_123",
            "vrfName": "VRF_1"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list>
        <host>host0</host>
        <forwardingFacility>uucp</forwardingFacility>
        <port>123</port>
        <severity>notifications</severity>
        <transport>tls</transport>
        <trustpointClientIdentity>TrustPointLabel_123</trustpointClientIdentity>
        <vrfName>VRF_1</vrfName>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility uucp

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

Deleting UUCP as the Facility to Use When Forwarding to the Server

Deleting UUCP as the Facility to Use When Forwarding to the Server

POST http://<mgmt0_IP>/api/mo/sys/syslog.json

{
  "syslogSyslog": {
    "children": [
      {
        "syslogRemoteDest": {
          "attributes": {
            "host": "host0",
            "status": "deleted"
}}}]}}

{
    imdata:[]
}

<System>
  <syslog-items>
    <rdst-items>
      <RemoteDest-list xc:operation="delete">
        <host>host0</host>
      </RemoteDest-list>
    </rdst-items>
  </syslog-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no logging server host0 5 port 123 secure trustpoint client-identity TrustPointLabel_123 use-vrf VRF_1 facility uucp

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html