Configuring the MOTD Banner

Configuring the MOTD Banner

POST http://<mgmt0_IP>/api/mo/sys/userext.json

{
  "aaaUserEp": {
    "children": [
      {
        "aaaPreLoginBanner": {
          "attributes": {
            "delimiter": "_",
            "message": ""
}}}]}}

{
    imdata:[]
}

<System>
  <userext-items>
    <preloginbanner-items>
      <delimiter>_</delimiter>
      <message></message>
    </preloginbanner-items>
  </userext-items>
</System>

Configures the MOTB (message-of-the-day) banner.

CLI Command

The CLI command below is the equivalent to the payload example displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload or the YANG tab to view the XML payload.

banner motd __

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html