Powering Off a Module in the Switch

Powering off a Module in the Switch

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "platformEntity": {
          "children": [
            {
              "platformPoweroffEntity": {
                "children": [
                  {
                    "platformPoweroffModule": {
                      "attributes": {
                        "id": "1",
                        "poweroffStatus": "yes"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

POST:  http://<IP_Address>/restconf/data/Cisco-NX-OS-device:

<System xmlns="http://cisco.com/ns/yang/cisco-nx-os-device">
  <pltfm-items>
    <poweroffEntity-items>
      <poweroffModule-items>
        <PoweroffModule-list>
          <id>1</id>
          <poweroffStatus>yes</poweroffStatus>
        </PoweroffModule-list>
      </poweroffModule-items>
    </poweroffEntity-items>
  </pltfm-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

poweroff module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide
https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Re-Powering on a Module in the Switch

Re-Powering a Module in the Switch

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "platformEntity": {
          "children": [
            {
              "platformPoweroffEntity": {
                "children": [
                  {
                    "platformPoweroffModule": {
                      "attributes": {
                        "id": "1",
                        "poweroffStatus": "no"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

POST:  http://<IP_Address>/restconf/data/Cisco-NX-OS-device:

<System>
  <pltfm-items>
    <poweroffEntity-items>
      <poweroffModule-items>
        <PoweroffModule-list>
          <id>1</id>
          <poweroffStatus>no</poweroffStatus>
        </PoweroffModule-list>
      </poweroffModule-items>
    </poweroffEntity-items>
  </pltfm-items>
</System>

CLI Commands

no poweroff module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/media/dme/index.html