Clearing Dynamic NAT

clear ip nat translation all

clear ip nat translation all

POST http://<mgmt-ip>/api/mo/sys/action.json

{
    "actionLSubj": {
     "attributes": {
      "dn": "sys/action/lsubj-[sys/nat]"
      }
       "children" : [ {
        "natInstIpNatTranslationLTask" : {
        "attributes" : {
        "adminSt": "start",
        "all": enabled,
        "dn": "sys/action/lsubj-[sys/nat]/natInstIpNatTranslationLTask",
        "freq": "one-shot"
}}}]}}

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

clear ip nat translation entry-id 3

clear ip nat translation entry-id 3

POST http://<mgmt-ip>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/nat]"
        }
        "children" : [ {
            "natInstIpNatTranslationLTask" : {
                "attributes" : {
                    "adminSt": "start",
                    "entryId": 3,
                    "dn": "sys/action/lsubj-[sys/nat]/natInstIpNatTranslationLTask",
                    "freq": "one-shot"
}}}]}}

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

clear ip nat statistics

clear ip nat statistics

POST http://<mgmt-ip>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/nat]"
        }
        "children" : [ {
            "natInstIpNatStatisticsLTask" : {
                "attributes" : {
                    "adminSt": "start",
                    "dn": "sys/action/lsubj-[sys/nat]/natInstIpNatStatisticsLTask",
                    "freq": "one-shot"
}}}]}}

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

clear ip nat-alias 50.1.1.6

clear ip nat-alias 50.1.1.6

POST http://<mgmt-ip>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/nat]"
        }
        "children" : [ {
            "natInstIpNatAliasLTask" : {
                "attributes" : {
                    "adminSt": "start",
                    "ipAddr": 50.1.1.6,
                    "dn": "sys/action/lsubj-[sys/nat]/natInstIpNatAliasLTask",
                    "freq": "one-shot"
}}}]}}

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

clear ip nat-alias all

clear ip nat-alias all

POST http://<mgmt-ip>/api/mo/sys/action.json
{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/nat]"
        }
        "children" : [ {
            "natInstIpNatAliasLTask" : {
                "attributes" : {
                    "adminSt": "start",
                    "all": enabled,
                    "dn": "sys/action/lsubj-[sys/nat]/natInstIpNatAliasLTask",
                    "freq": "one-shot"
}}}]}}

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

clear nat itd

clear nat itd

POST http://<IP_Address>/api/mo/sys/action.json

{
"actionLSubj": {
  "attributes": {
    "dn": "sys/action/lsubj-[sys/nat]"
  }
  "children" : [{
    "natInstNatItdConfigLTask" : {
      "attributes": {
        "adminSt": "start",
        "all": "enabled",
        "dn": "sys/action/lsubj-[sys/nat]/natInstNatItdConfigLTask",
        "freq": "one-shot"
      }
    }
}]
}

Note: This example was added in Release 9.3(3).


CLI Commands

clear nat itd { <all> | <acl_name>

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
actionLSubj sys/action/lsubj-{[oDn]}


actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
dn
reference:BinRef		A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html