Configuring a Neighbor

Configuring LDP Neighbor Implicit Withdraw

Configuring LDP Neighbor Implicit Withdraw

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "implicitWithdraw": "yes",
                  "nbrAddr": "1.2.3.4"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <implicitWithdraw>true</implicitWithdraw>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

mpls ldp configuration
neighbor 1.2.3.4 implicit-withdraw

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

The following table contains information about the mplsldpLDP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

The following table contains information about the mplsldpNeighbor properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
implicitWithdraw	scalar:Bool	Enable LDP neighbor implicit withdraw	SELECTION: true or false DEFAULT: false
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting LDP Neighbor Implicit Withdraw Label

Deleting LDP Neighbor Implicit Withdraw Label

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "implicitWithdraw": "no",
                  "nbrAddr": "1.2.3.4"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <implicitWithdraw>false</implicitWithdraw>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

mpls ldp configuration
no neighbor 1.2.3.4 implicit-withdraw

Verifying a DME Configuration

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

Property Name	Data Type	Description	Values
implicitWithdraw	scalar:Bool	Enable LDP neighbor implicit withdraw	SELECTION: true or false DEFAULT: false
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Label Binding Exchange Controls

Configuring Label Binding Exchange Controls

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "nbrAddr": "1.2.3.4",
                  "pfxList": "prefix-pfxlist"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <pfxList>prefix-pfxlist</pfxList>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

mpls ldp configuration
neighbor 1.2.3.4 labels accept prefix-pfxlist

Verifying a DME Configuration

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

Property Name	Data Type	Description	Values
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format
pfxList	mplsldp:LdpPrefixListName (string:Basic)	Specifies the prefix list to be used to filter label bindings for the specified LDP neighbor.	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Label Binding Exchange Controls

Deleting Label Binding Exchange Controls

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "nbrAddr": "1.2.3.4",
                  "pfxList": ""
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <pfxList></pfxList>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

mpls ldp configuration
no neighbor 1.2.3.4 labels accept prefix-pfxlist

Verifying a DME Configuration

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

Property Name	Data Type	Description	Values
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format
pfxList	mplsldp:LdpPrefixListName (string:Basic)	Specifies the prefix list to be used to filter label bindings for the specified LDP neighbor.	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Targeted Session

Configuring Targeted Session

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "nbrAddr": "1.2.3.4",
                  "targeted": "yes"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <targeted>true</targeted>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

mpls ldp configuration
neighbor 1.2.3.4 targeted

Verifying a DME Configuration

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

Property Name	Data Type	Description	Values
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format
targeted	scalar:Bool	Establish LDP targeted session	SELECTION: true or false DEFAULT: false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Targeted Session

Deleting Targeted Session

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpNeighbor": {
                "attributes": {
                  "nbrAddr": "1.2.3.4",
                  "targeted": "no"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <neighbor-items>
      <Neighbor-list>
        <nbrAddr>1.2.3.4</nbrAddr>
        <targeted>false</targeted>
      </Neighbor-list>
    </neighbor-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

mpls ldp configuration
no neighbor 1.2.3.4 targeted

Verifying a DME Configuration

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpNeighbor	sys/ldp/neighbor-[1.2.3.4]

mplsldpLDP Properties

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpNeighbor Properties

Property Name	Data Type	Description	Values
nbrAddr	address:Ip	IP address for LDP neighbor	Value must match ipv4 or ipv6 known format
targeted	scalar:Bool	Establish LDP targeted session	SELECTION: true or false DEFAULT: false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html