Cisco Nexus 3000 and 9000 Series NX-API REST SDK API, Release 9.3(x)

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring Peer Policy Inheritance

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeerIf": {
                      "attributes": {
                        "id": "eth1/2"
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "type": "vpnv4-ucast"
                            },
                            "children": [
                              {
                                "bgpPolicyInheritRule": {
                                  "attributes": {
                                    "name": "SampleString_123",
                                    "seq": "8688"
}}}]}}]}}]}}]}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peerif-items>
            <PeerIf-list>
              <id>eth1/2</id>
              <af-items>
                <PeerAf-list>
                  <type>vpnv4-ucast</type>
                  <pol-items>
                    <PolicyInheritRule-list>
                      <name>SampleString_123</name>
                      <seq>8688</seq>
                    </PolicyInheritRule-list>
                  </pol-items>
                </PeerAf-list>
              </af-items>
            </PeerIf-list>
          </peerif-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Configuring a VPNv4 Unicast Subaddress Family Under a BGP Neighbor (Ethernet Interface)

Configuring Peer Policy Inheritance

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    inherit peer-policy SampleString_123 8688

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPolicyInheritRule	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pol-SampleString_123

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

The following table contains information about the bgpPeerIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPolicyInheritRule Properties

The following table contains information about the bgpPolicyInheritRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63
seq	bgp:Order (scalar:Uint16)	Sequence Number	RANGE: [1 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Peer Policy Inheritance

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no inherit peer-policy SampleString_123 8688

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPolicyInheritRule	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pol-SampleString_123

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPolicyInheritRule Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring As Path Acceptance with My AS Present In It

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    allowas-in 7

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
allowedSelfAsCnt	scalar:UByte	Allowed Self AS Count	RANGE: [0 , 10] DEFAULT: 0
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting As Path Acceptance with My AS Present In It

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no allowas-in 7

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
allowedSelfAsCnt	scalar:UByte	Allowed Self AS Count	RANGE: [0 , 10] DEFAULT: 0
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring to Send Standard and Extended Community Attributes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    send-community both

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComExt	bgp:AdminSt (scalar:Enum8)	Send-community extended	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
sendComStd	bgp:AdminSt (scalar:Enum8)	Send-community standard	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting to Send Standard and Extended Community Attributes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no send-community both

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComExt	bgp:AdminSt (scalar:Enum8)	Send-community extended	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
sendComStd	bgp:AdminSt (scalar:Enum8)	Send-community standard	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring to Send Standard Community Attributes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    send-community standard

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComStd	bgp:AdminSt (scalar:Enum8)	Send-community standard	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting to Send Standard Community Attributes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no send-community standard

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComStd	bgp:AdminSt (scalar:Enum8)	Send-community standard	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Extended Community Attribute

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    send-community extended

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComExt	bgp:AdminSt (scalar:Enum8)	Send-community extended	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Extended Community Attribute

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no send-community extended

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
sendComExt	bgp:AdminSt (scalar:Enum8)	Send-community extended	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Neighbor as Route-Reflector Client

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    route-reflector-client

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Neighbor as Route-Reflector Client

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no route-reflector-client

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Default Weight for Routes from a Neighbor

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    weight 155

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast
wght	string:Basic	Weight for the neighbor.	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Default Weight for Routes from a Neighbor

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no weight 155

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast
wght	string:Basic	Weight for the neighbor.	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Policy Application to Incoming Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    prefix-list SampleString_123 in

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPfxCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pfxctrl-in

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

The following table contains information about the bgpPfxCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Policy Application to Incoming Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no prefix-list SampleString_123 in

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPfxCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pfxctrl-in

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Policy Application (Prefix List)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    prefix-list SampleString_123 out

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPfxCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pfxctrl-out

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Policy Application (Prefix List)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no prefix-list SampleString_123 out

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpPfxCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/pfxctrl-out

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Policy Application to Incoming Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    filter-list SampleString_123 in

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpFltrCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/fltrctrl-in

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

The following table contains information about the bgpFltrCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Policy Application to Incoming Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no filter-list SampleString_123 in

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpFltrCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/fltrctrl-in

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Policy Application (Filter List)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    filter-list SampleString_123 out

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpFltrCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/fltrctrl-out

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Policy Application (Filter List)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no filter-list SampleString_123 out

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpFltrCtrlP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/fltrctrl-out

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring BGP Connection Restart After a Limit is Exceeded

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    maximum-prefix 1 4 restart 27129

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpMaxPfxP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/maxpfxp

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpMaxPfxP Properties

The following table contains information about the bgpMaxPfxP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
action	bgp:MaxPfxAct (scalar:Enum8)	Action to do when limit is exceeded	SELECTION: 1 - log 2 - shut 3 - restart DEFAULT: shut
maxPfx	bgp:MaxPfx (scalar:Uint32)	Maximum number of prefixes allowed from the peer.	RANGE: [0, 4294967295]
restartTime	bgp:MaxPfxDuration (scalar:Uint16)	The period of time in minutes before restarting the peer when the prefix limit is reached.	RANGE: [0 , 0xffff]
thresh	bgp:MaxPfxThresh (scalar:UByte)	The threshold percentage of the maximum number of prefixes before a warning is issued. For example, if the maximum number of prefixes is 10 and the threshold is 70%, a warning is issued when the number of prefixes exceeds 7 (70%).	RANGE: [0 , 100]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting BGP Connection Restart After a Limit is Exceeded

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no maximum-prefix 1 4 restart 27129

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpMaxPfxP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/maxpfxp

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpMaxPfxP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Warning Message When a Limit is Exceeded

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    maximum-prefix 1 4 warning-only

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpMaxPfxP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/maxpfxp

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpMaxPfxP Properties

Property Name	Data Type	Description	Values
action	bgp:MaxPfxAct (scalar:Enum8)	Action to do when limit is exceeded	SELECTION: 1 - log 2 - shut 3 - restart DEFAULT: shut
maxPfx	bgp:MaxPfx (scalar:Uint32)	Maximum number of prefixes allowed from the peer.	RANGE: [0, 4294967295]
restartTime	bgp:MaxPfxDuration (scalar:Uint16)	The period of time in minutes before restarting the peer when the prefix limit is reached.	RANGE: [0 , 0xffff]
thresh	bgp:MaxPfxThresh (scalar:UByte)	The threshold percentage of the maximum number of prefixes before a warning is issued. For example, if the maximum number of prefixes is 10 and the threshold is 70%, a warning is issued when the number of prefixes exceeds 7 (70%).	RANGE: [0 , 100]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Warning Message When a Limit is Exceeded

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no maximum-prefix 1 4 warning-only

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast
bgpMaxPfxP	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast/maxpfxp

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

bgpMaxPfxP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Minimum Interval Between Sending BGP Routing Updates

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    advertisement-interval 219

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
advIntvl	bgp:AdvInterval (scalar:Uint16)	Neighbor advertisement interval	RANGE: [0 , 600]
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Minimum Interval Between Sending BGP Routing Updates

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no advertisement-interval 219

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
advIntvl	bgp:AdvInterval (scalar:Uint16)	Neighbor advertisement interval	RANGE: [0 , 600]
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Our Address as Nexthop for All Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    next-hop-self all

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
nhSelfAll	scalar:Bool	Set address as next-hop for all routes	SELECTION: true or false
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Our Address as Nexthop for All Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no next-hop-self all

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
nhSelfAll	scalar:Bool	Set address as next-hop for all routes	SELECTION: true or false
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring to Not Advertise Additional Paths (Send Capability)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    capability additional-paths send disable

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
capAddlPaths	bgp:CapAddlPathCapT (scalar:Bitmask8)	Capability Additional Paths	SELECTION: 1 - send 2 - recv 4 - send-disable 8 - recv-disable
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting to Not Advertise Additional Paths (Send Capability)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no capability additional-paths send disable

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
capAddlPaths	bgp:CapAddlPathCapT (scalar:Bitmask8)	Capability Additional Paths	SELECTION: 1 - send 2 - recv 4 - send-disable 8 - recv-disable
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring to Not Advertise Additional Paths (Receive Capability)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    capability additional-paths receive disable

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
capAddlPaths	bgp:CapAddlPathCapT (scalar:Bitmask8)	Capability Additional Paths	SELECTION: 1 - send 2 - recv 4 - send-disable 8 - recv-disable
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting to Not Advertise Additional Paths (Receive Capability)

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no capability additional-paths receive disable

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
capAddlPaths	bgp:CapAddlPathCapT (scalar:Bitmask8)	Capability Additional Paths	SELECTION: 1 - send 2 - recv 4 - send-disable 8 - recv-disable
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Route Map to Selectively Unsuppress Suppressed Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    unsuppress-map SampleString_123

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast
unSupprMap	string:Basic	Route-map to selectively unsuppress suppressed routes	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Route Map to Selectively Unsuppress Suppressed Routes

Note: This example was added in Release 9.3(3).

CLI Commands

router bgp 100
  neighbor ethernet 1/2
   address-family vpnv4 unicast
    no unsuppress-map SampleString_123

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpPeerIf	sys/bgp/inst/dom-default/peerif-[eth1/2]
bgpPeerAf	sys/bgp/inst/dom-default/peerif-[eth1/2]/af-vpnv4-ucast

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeerIf Properties

Property Name	Data Type	Description	Values
id	nw:IfId (base:IfIndex)	Interface identifier of the neighbor	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 12 - lnkstate 14 - ipv6-mvpn 15 - l2vpn-vpls div>DEFAULT: ipv4-ucast
unSupprMap	string:Basic	Route-map to selectively unsuppress suppressed routes	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html