Configuring a VPNv6 Unicast Subaddress Family Under a BGP Neighbor (IP Address)

Configuring the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Configuring the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

POST http://<mgmt0_IP>/api/mo/sys/bgp/inst.json

{
  "bgpInst": {
    "attributes": {
      "asn": "100"
    },
    "children": [
      {
        "bgpDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "bgpPeer": {
                "attributes": {
                  "addr": "1.2.3.4",
                  "inheritContPeerCtrl": ""
                },
                "children": [
                  {
                    "bgpPeerAf": {
                      "attributes": {
                        "ctrl": "nh-self",
                        "inheritContPeerPolicyCtrl": "",
                        "type": "vpnv6-ucast"
                      },
                      "children": [
                        {
                          "bgpPolicyInheritRule": {
                            "attributes": {
                              "name": "pol",
                              "seq": "1"
}}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl>nh-self</ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <pol-items>
                    <PolicyInheritRule-list>
                      <name>pol</name>
                      <seq>1</seq>
                    </PolicyInheritRule-list>
                  </pol-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy pol 1
   next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPolicyInheritRule Properties

The following table contains information about the bgpPolicyInheritRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Deleting the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

POST http://<mgmt0_IP>/api/mo/sys/bgp/inst.json

{
  "bgpInst": {
    "attributes": {
      "asn": "100"
    },
    "children": [
      {
        "bgpDom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "bgpPeer": {
                "attributes": {
                  "addr": "1.2.3.4",
                  "inheritContPeerCtrl": ""
                },
                "children": [
                  {
                    "bgpPeerAf": {
                      "attributes": {
                        "ctrl": "",
                        "inheritContPeerPolicyCtrl": "nh-self",
                        "type": "vpnv6-ucast"
                      },
                      "children": [
                        {
                          "bgpPolicyInheritRule": {
                            "attributes": {
                              "name": "pol",
                              "seq": "1"
}}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl>nh-self</inheritContPeerPolicyCtrl>
                  <pol-items>
                    <PolicyInheritRule-list>
                      <name>pol</name>
                      <seq>1</seq>
                    </PolicyInheritRule-list>
                  </pol-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy pol 1
   no next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPolicyInheritRule Properties

The following table contains information about the bgpPolicyInheritRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying an AS-PATH Filter List to Incoming Routes

Applying an AS-PATH Filter List to Incoming Routes 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "123"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpFltrCtrlP": {
                                  "attributes": {
                                    "direction": "in",
                                    "list": "List_A"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <fltrctrl-items>
                    <FltrCtrlP-list>
                      <direction>in</direction>
                      <list>List_A</list>
                    </FltrCtrlP-list>
                  </fltrctrl-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   filter-list List_A in

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpFltrCtrlP Properties

The following table contains information about the bgpFltrCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying an AS-PATH Filter List to Outgoing Routes

Applying an AS-PATH Filter List to Outgoing Routes 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "123"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpFltrCtrlP": {
                                  "attributes": {
                                    "direction": "out",
                                    "list": "List_A"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <fltrctrl-items>
                    <FltrCtrlP-list>
                      <direction>out</direction>
                      <list>List_A</list>
                    </FltrCtrlP-list>
                  </fltrctrl-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   filter-list List_A out

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpFltrCtrlP Properties

The following table contains information about the bgpFltrCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Incoming Routes

Applying a Prefix List to Incoming Routes 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "rpmEntity": {
          "children": [
            {
              "rtpfxRuleV4": {
                "attributes": {
                  "name": "List_1"
                },
                "children": [
                  {
                    "rtpfxEntry": {
                      "attributes": {
                        "action": "permit",
                        "criteria": "exact",
                        "fromPfxLen": "0",
                        "order": "10",
                        "pfx": "4.3.2.1/3",
                        "toPfxLen": "0"
}}}]}}]}},{
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "123"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": ""
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "inheritContPeerPolicyCtrl": "",
                                    "type": "vpnv6-ucast"
                                  },
                                  "children": [
                                    {
                                      "bgpPfxCtrlP": {
                                        "attributes": {
                                          "direction": "in",
                                          "list": "List_1"
}}}]}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <rpm-items>
    <pfxlistv4-items>
      <RuleV4-list>
        <name>List_1</name>
        <ent-items>
          <Entry-list>
            <order>10</order>
            <action>permit</action>
            <criteria>exact</criteria>
            <fromPfxLen>0</fromPfxLen>
            <pfx>4.3.2.1/3</pfx>
            <toPfxLen>0</toPfxLen>
          </Entry-list>
        </ent-items>
      </RuleV4-list>
    </pfxlistv4-items>
  </rpm-items>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <pfxctrl-items>
                    <PfxCtrlP-list>
                      <direction>in</direction>
                      <list>List_1</list>
                    </PfxCtrlP-list>
                  </pfxctrl-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   prefix-list List_1 in

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

rtpfxRuleV4 Properties

The following table contains information about the rtpfxRuleV4 properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

rtpfxEntry Properties

The following table contains information about the rtpfxEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPfxCtrlP Properties

The following table contains information about the bgpPfxCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Outgoing Routes

Applying a Prefix List to Outgoing Routes 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "rpmEntity": {
          "children": [
            {
              "rtpfxRuleV4": {
                "attributes": {
                  "name": "List_1"
                },
                "children": [
                  {
                    "rtpfxEntry": {
                      "attributes": {
                        "action": "permit",
                        "criteria": "exact",
                        "fromPfxLen": "0",
                        "order": "10",
                        "pfx": "4.3.2.1/3",
                        "toPfxLen": "0"
}}}]}}]}},{
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "123"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": ""
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "inheritContPeerPolicyCtrl": "",
                                    "type": "vpnv6-ucast"
                                  },
                                  "children": [
                                    {
                                      "bgpPfxCtrlP": {
                                        "attributes": {
                                          "direction": "out",
                                          "list": "List_1"
}}}]}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <rpm-items>
    <pfxlistv4-items>
      <RuleV4-list>
        <name>List_1</name>
        <ent-items>
          <Entry-list>
            <order>10</order>
            <action>permit</action>
            <criteria>exact</criteria>
            <fromPfxLen>0</fromPfxLen>
            <pfx>4.3.2.1/3</pfx>
            <toPfxLen>0</toPfxLen>
          </Entry-list>
        </ent-items>
      </RuleV4-list>
    </pfxlistv4-items>
  </rpm-items>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <pfxctrl-items>
                    <PfxCtrlP-list>
                      <direction>out</direction>
                      <list>List_1</list>
                    </PfxCtrlP-list>
                  </pfxctrl-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   prefix-list List_1 out

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

rtpfxRuleV4 Properties

The following table contains information about the rtpfxRuleV4 properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

rtpfxEntry Properties

The following table contains information about the rtpfxEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPfxCtrlP Properties

The following table contains information about the bgpPfxCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peering Address as Nexthop

Configuring the Peering Address as Nexthop

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "123"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "nh-self",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
}}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl>nh-self</ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peering Address as Nexthop (Values inherited from a Peer Template)

Configuring the Peering Address as Nexthop (Values inherited from a Peer Template)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "topSystem": {
    "children": [
      {
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "123"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": ""
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "ctrl": "",
                                    "inheritContPeerPolicyCtrl": "",
                                    "type": "vpnv6-ucast"
                                  },
                                  "children": [
                                    {
                                      "bgpPolicyInheritRule": {
                                        "attributes": {
                                          "name": "Pol1",
                                          "seq": "123"
                                        }
                                      }
                                    }
                                  ]
                                }
                              }
                            ]
                          }
                        },
                        {
                          "bgpPolicyCont": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "name": "Pol1"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <pol-items>
                    <PolicyInheritRule-list>
                      <name>Pol1</name>
                      <seq>123</seq>
                    </PolicyInheritRule-list>
                  </pol-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
          <policycont-items>
            <PolicyCont-list>
              <name>Pol1</name>
              <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
            </PolicyCont-list>
          </policycont-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 template peer-policy Pol1
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy Pol1 123
    default next-hop-self

Note: Default is only valid when inheriting a template

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPolicyInheritRule Properties

The following table contains information about the bgpPolicyInheritRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPolicyCont Properties

The following table contains information about the bgpPolicyCont properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configuration for the Peering Address Set as Nexthop

Deleting the Configuration for the Peering Address Set as Nexthop 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "123"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
}}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  no next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peering Address as Nexthop

Configuring the Peering Address as Nexthop 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "nh-self",
                              "inheritContPeerPolicyCtrl": "",
                              "nhSelfAll": "no",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl>nh-self</ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <nhSelfAll>false</nhSelfAll>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Peering Address as Nexthop

Deleting the Peering Address as Nexthop 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "",
                              "inheritContPeerPolicyCtrl": "",
                              "nhSelfAll": "no",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <nhSelfAll>false</nhSelfAll>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  no next-hop-self

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Address as Nexthop for All Routes

Configuring the Address as Nexthop for All Routes

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "",
                              "inheritContPeerPolicyCtrl": "",
                              "nhSelfAll": "yes",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <nhSelfAll>true</nhSelfAll>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  next-hop-self all

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Address Configured as Nexthop for All Routes

Deleting the Address Configured as Nexthop for All Routes

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "",
                              "inheritContPeerPolicyCtrl": "",
                              "nhSelfAll": "no",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <nhSelfAll>false</nhSelfAll>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  no next-hop-self all

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Minimum Interval Between Sending BGP Routing Updates

 Configuring the Minimum Interval Between Sending BGP Routing Updates

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "advIntvl": "466",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <advIntvl>466</advIntvl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  advertisement-interval 466

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Minimum Interval Between Sending BGP Routing Updates

Deleting the Minimum Interval Between Sending BGP Routing Updates 

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "advIntvl": "0",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <advIntvl>0</advIntvl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.2(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  no advertisement-interval 466

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Route Map to Specify Import Criteria

Configuring a Route Map to Specify Import Criteria

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "l2vpn-evpn",
                                    "reoriginate": "no",
                                    "rtMap": "SampleString_123"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>l2vpn-evpn</importType>
                      <importRt>true</importRt>
                      <reoriginate>false</reoriginate>
                      <rtMap>SampleString_123</rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    import l2vpn evpn route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Route Map to Specify Import Criteria

Deleting a Route Map to Specify Import Criteria

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "l2vpn-evpn",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>l2vpn-evpn</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    no import l2vpn evpn route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reoriginating the Route with a New RT

Reoriginating the Route with a New RT

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "l2vpn-evpn",
                                    "reoriginate": "yes",
                                    "rtMap": ""
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>l2vpn-evpn</importType>
                      <importRt>true</importRt>
                      <reoriginate>true</reoriginate>
                      <rtMap></rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    import l2vpn evpn reoriginate

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Reoriginating Config

Deleting the Reoriginating Config

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "l2vpn-evpn",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>l2vpn-evpn</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    no import l2vpn evpn reoriginate

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Importing the Routes into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)

Importing the Routes into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "l2vpn-evpn",
                                    "reoriginate": "no",
                                    "rtMap": "SampleString_123"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>l2vpn-evpn</importType>
                      <importRt>true</importRt>
                      <reoriginate>false</reoriginate>
                      <rtMap>SampleString_123</rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    import l2vpn evpn route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Routes Imported into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)

Deleting the Routes Imported into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "vpnv6-ucast"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "l2vpn-evpn",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>vpnv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>l2vpn-evpn</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family vpnv6 unicast
    no import l2vpn evpn route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html